SPL REPAIRS/REPLACEMENT OF OLD UNSERVICEABLE VTPN DBS SPN DB, MCB/MCCBS AND SUB MAIN WIRING AND CONNECTED ITEMS OF MD ACCN AT BS MARG, GGS MARG AND RC ROAD AND PROVN OF PETROL STORE FOR MT AT BARABANKI MILITARY STATION UNDER GE (EAST) LUCKNOW

Amount

Excavation in trenches not exc. 1.5 mtr wide & not exc. 1.5 mtr deep in soft/loose soil & getting out complete all as specified and directed

M&L for PCC (1:5:10) type E-2, using 40mm graded stone aggregate as in foundataion fiiling & mass concrete complete all as specified and directed

M&L for brick work with modular fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed

Returning, filling in including spreading, levelling watering & well ramming in layers not exc. 25cm thick in soft/loose soil complete all as specified and directed

M&L for spreading & levelling in layers not exc. 25 cm thick well ramming including watering as required complete all as specified and directed

M&L for removing excavated material not exc.50 Mtr & depositing where directed at a level not exc.1.5Mtr above the starting point complete all as specified and directed

M&L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base of flooring complete all as specified and directed

Supply only water proofing compound ISI marked complete all as specified and directed

M&L for DPC in PCC (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork damp proof course 40mm thick complete all as specified and directed

M&L for rendering 15mm thick in CM(1:6) on other than fair faces of brick/concrete work finishing even & smooth without using extra cement complete all as specified and directed

All as per item No 10 above but in CM (1:4) on fair faces of brick work complete all as specified and directed

All as item No 10 above but 5mm thick in CM(1:3) on ceiling

M&L for 100mm thick RCC(1:2:4) type B-1, using 20mm graded stone aggregate as in slab supported on walls beams & columns in floors, roofs, landing complete all as specified and directed

M&L for RCC (1:2:4) type B-1 as in lintels, beam etc. over 1.5mtr span complete all as specified and directed

M&L for RCC (1:2:4) type B-1 as in Chajjas etc complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in footings, foundation beams complete all as specified and directed

M&L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips complete all as specified and directed

All as per item No-18 above but MS bar as in stirrups, spacers & binders etc. 5 mm dia and over up to and including 10 mm dia bar.

All as per item 18 above but 6 to 8 mm as in stirrups, spacers & binders.

M&L for formwork to sofits of suspended slabs as roof slabs, floor slabs & similar work not exc. 250mm thick on rough finished surface of concrete complete all as specified and directed

All as per item No 21 above but to chajjas including edges

All as per item No 21 above but to sides and soffits of beams , lintels etc.

M&L for formwork to edges of concrete flats not exc. 10cm wide complete all as specified and directed

M&L for formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

All as per item No 25 above but to sides of rectangular pillars, posts, columns etc.

M&L for three coats of white wash on newly plastered surface of wall including preparation the surface of walls complete all as specified and directed

M&L two coats of cement base paint on newly plastered surface of walls incl preperation the surface of walls complete all as specified and directed

All as per item No 28 above but on ceiling

M&L for hardcore brick broken of guage not exc. 63mm, deposited spread & levelled in layers not exc.15cm thick, waterd & rammed to a true surface using broken bricks 50 mm thick complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20mm thick graded stone aggregate) as in plinth protection complete all as specified and directed

M&L for continuous brick edging 75mm wide with brick laid on end vertically with sub cclass 'B' brick complete all as specified and directed

M&L for rendering 20mm thick in CM(1:4) on fair faces of brick/concrete work with WPC and finishing the surfaceeven & smooth without using extra cement complete all as specified and directed

M&L moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

S&F mild steel door shutter with MS angle iron shutters frame 35mm x35mm x5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos to tower bolt of 200 mm long including MS angle iron frame 40 mm x40 mm x 6mm as in chowkhat with 6 nos hold fast of flat iron 30 mm x 5 mm, 200 mm long with bottom flat iron of size 30 mm x 5 mm and 100 mm size 4 Nos butt hinges medium weight including necessary cutting welding, binding as required with two coats synthetic enamel paint over a coat of red oxixe primer including preparation of new steel surfaces complete all as specified shown on drawing and as direcetd (Single shutter of approx width 0.9 to 1.2 M and height 1.9 to 2.1 M)

S& F in replacement of in factory made powder coated distribution board SPN 4 way fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one SP MCB as a incomer and 3 SP MCBs as outgoing after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 43, IK -09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 08 Nos.

M&L in factory made Pantone 7541C shade powder coated distribution board SP & N 12 way fabricated of CRCA sheet with metal door (IP-43 protection- IK -09) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 10 SP MCBs as outgoing after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

M&L in factory made powder coated distribution board SP & N 8 way fabricated of CRCA sheet with metal door (IP-43 protection IK -09) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as a incomer and 6 SP MCBs after fixing making good surface with fine plastering, finishing and colouring with existing colour matching as outgoing complete all as specified and directed

M&L in factory made powder coated distribution board 4 way TPN DB Double door with metal double door (IP-43 protection IK -09) fabricated of CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps bus bar, Neutral bar, Standard din rail,earth bar and cable ties for cable management, top and bottom removable gland plates with provn for MCB TPN and RCCB as incomer and 12 SP MCBs outgoing after fixing making good surface with fine plastering, finishing and colouring with existing colour matchingcomplete all as specified and directed

Supply and fix SRCD D Box 20 Amp with steel enclosure suitable for Geyser & AC protection to human from eletric shock due to direct and Indirect current as well as provide protection from overload and short circuit fault complete with double pole MCB 20Amp after fixing making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

M&L for replacement TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828, IEC 60898 complete all as specified and directed

M&L in replacement of SP MCB 6 TO 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable making good surface with fine plastering, finishing and colouring with existing colour matchingcomplete conforming to IS 8828, IEC 60898 complete all as specified and directed

M&L in replacement of MCB Single Pole & Neutral MCB 32 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity and terminal box suitable upto 35 sqmm cable complete all as specified and directed

Supply and fixing in replacement of MCCB current rating 100 Amps with thermal magnetic release, 4 pole, 415 volts AC 16 KA Ics = 50% Icu as per IEC 60947-2 ruputuring capacity complete all as specified and directed

Supply and fixing in replacement of MCCB current rating 125 Amps with thermal magnetic release, 4 pole, 415 volts AC 36 KA Ics = 50% Icu as per IEC 60947-2 ruputuring capacity complete all as specified and directed

Supply and fixing in replacement LED Bldg security light fitting LED 45 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 protection incl with suitable bracket necessary nuts and bolt complete all as specified and directed and directed.Make :- BRP052 LED 045 CW SLMR FGS1PSU GR of Philips, Havells Cat No.ENDURASUNDOWNSL45WLED765PASYBOPC

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

HS ASSOCIATES

M/S S S A ASSOCIATES

QUALITY CONSTRUCTIONS CO

VIDYA TRADERS

m/s raghubar dayal