Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹45.3 L+₹82,062.25 (1.85%)Rejected-Finance SUBHASINI TEA ESTATE HASIMARA PS JAIGOAN DIST ALIPURDUAR WB PIN 735215 | ALIPURDUAR | WEST BENGAL | 735215 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹45.6 L+₹1.1 L (2.55%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹45.8 L+₹1.4 L (3.07%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹45.9 L+₹1.4 L (3.21%)Rejected-Finance HAMILTONGANJ NETAJI PALLY NEAR ICE FACTORY DISTT ALIPURDUAR WEST BENGAL 735 214 | ALIPURDUAR | WEST BENGAL | 735214 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
6 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) HASIMARA
GE (AF) HASIMARA PO-HASIMARA DIST- ALIPURDUAR PIN-735215
PROVN OF GREASE TRAP AND ADDN/ALTN OF BLDG NO. P-590 AT NCS (E) AREA AT AF STN HASIMARA
2024_MES_650050_1
C/8735/2024-25/E8
Open Tender
Civil Works
Item Rate
210 days
GE (AF) HASIMARA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) HASIMARA
₹92,000
Yes
31 May 2024
13 Apr 2024
8 May 2024
13 Apr 2024
6 May 2024
29 Apr 2024
Amount
Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing neat cement slurry with 3 kg of cement per Sqm, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
M&L for joint free glazed ceramic coloured tiles of size 350x250x7mm/450x350 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed, complete all as specified and as directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in repair, complete all as specified and directed.
Rounding to edges of granite slabs one edge, such as cooking platform, steps and other similar situations, complete all as specified and as directed.
Demoliton of cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 75mm thick PCC (1:2:4) type B- 2, (using 40mm graded crushed stone aggregate) for pavings or plinth protection etc., complete all as specified and directed.
M&L for PCC (1:4:8) type D- 2, (using 40mm graded crushed stone aggregate) as in foundaion, filling and mass concrete, complete all as specified and directed.
M&L for PCC (1:2:4) type B- 1, (using 20mm graded crushed stone aggregate) as in , complete all as specified and directed.lintels upto 1.5m clear span, clis, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles, complete all as specified and directed.
M&L for concrete bed to drain pipes, in PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate), laid in trenches including packing and haunching against the sides of pipes after they are laid and tested, for 100mm bore pipe, complete all as specified and directed.
M&L for 100mm internal dia salt glazed stoneware drain pipes, grade 'A', complete all as specified and directed.
M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregrate) as in beams, cantilevers. Bressummers, lintels etc., complete all as specified and directed.
M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'B', thichness of slab 75mm, complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed..
Demolition of bricks work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete aritcles, complete all as specified and directed.
Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc. 6m mean radius, built in CM (1:6), complete all as specified and directed.
M&L for brick work with fly ash bricks, old size straight or curved on plan to any radius, built in CM (1:4) as in half brick thick wall, complete all as specified and directed.
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) and finished even and smooth without using extra cement, complete all as specified and directed.
M&L for preparing newly plastered of wall and applying two coats of oil bound distemper over a coat of wall care putty, 3mm thick, complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
M&L for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over and including a coat of 3mm thick wall care putty, complete all as specified and directed.
M&L for preparation of old surfaces of ceilings and applying two coats of white wash, complete all as specified and directed.
M&L for complete removal of existing treatment, of ceiling surfaces and applying two coats of oil bound distemper, complete all as specified and directed.
M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint (1st grade quality) in camouflage pattren/green paint on surface of any description over 10cm width or girth not otherwise described, complete all as specified and directed.
M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint (1st grade quality) in camouflage pattren/green paint on surface of any description over 10cm width or girth not otherwise described, complete all as specified and directed.
Taking down 15mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for refixing or removal from site of work, complete all as specified and directed.
Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for refixing or removal from site of work, complete all as specified and directed.
Taking down 25mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
S&F CPVC pipe of size 20mm dia, high pressure SDR 11 & plain CPVC SDR 11 fittings complete, fixed in floors/wall/ceiling with necessary saddle/clamps including all necessary fittings like elbow, Tee, socket, reducer etc. with necessary solvent cement, complete all as specified and directed.
S&F CPVC pipe of size 25mm dia, high pressure SDR 11 & plain CPVC SDR 11 fittings complete, fixed in floors/wall/ceiling with necessary saddle/clamps including all necessary fittings like elbow, Tee, socket, reducer etc. with necessary solvent cement, complete all as specified and directed.
S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F in repair 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580mm x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti -syphonage pipe etc., complete all as specified and directed.
S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve, float and handle and connection to pipes, complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back of size 450mm x 300mm including PVC waste pipe 32mm bore, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.
S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.
S&F in repair 15mm bore, fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.
S&F in repair 15mm bore, two way bib tab (fancy type), chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair 15mm bore angular vave, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F in repair 15mm bore sink cock, fency type (table mounted) with swivel spout 215mm long, complete all as specified and directed.
S&F PVC cabinet mirror of size 450 x 350mm, complete all as specified and directed.
S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed.
S&F in repair CP shower arm 15mm size, 195cm long with bend of 45 degree with flange, complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.
S&F of 32mm dia collapsible waste pipe not less than 800mm long for wash hand basin and sink, complete all as specified and directed.
S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms), complete all as specified and directed.
S&F 5.5mm thick glass shelf of size 12cm wide x 60cm long for wash hand basin etc., complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) rain water pipes,single sockets, in any length with sealant rubber ring joints fixed to wall with and including necessary MS flat iron clamps of size (40x4mm), complete all as specified and directed.
S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.
S & F in repair 75mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall with and including MS flat iron clamps (size 40 x 4mm), complete all as specified and directed.
S&F in repair of 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.
S&F in repair CP grating 100mm dia fixed with white cement, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.
S&F disconnecting existing tanks, capacity exc 500 ltr & n. exc 1000 ltr, setting aside (or lowering, if required) for repair of roof, cleaning and removing all scale and dirt etc. and from mouths of circulating pipes etc, hoisting, if required, re-fixing in position and reconnecting, complete all as specified and directed.
S&F in repair 25mm bore ball valve, standard of PTMT, high pressure, with epoxy coated aluminium rod and high density plastic ball screwd for iron pipe or brass, complete all as specified and directed.
S&F in repair PTMT nipple 25mm suitable for HDPE water tank (minimum weight 65 gms), complete all as specified and directed.
S&F in repair PTMT nipple 20mm suitable for HDPE water tank (minimum weight 45 gms), mplete all as specified and directed.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.
Taking down shutter of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.
Taking down shutter of any description exc 1 & n.exc 2 Sqm each and refixing in same opening, complete all as specified and directed.
S&F 125X60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Cutting holes in brick walls built in CM for inserting hold fasts and making good dismantled portion in CM (1:3) or PCC (1:2:4), type B-1 (using 12.5mm graded crused stone aggregate) as in depth of embedded portion of hold fast n. exc. half brick, complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F powder coated aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50micron, complete all as specified and directed.
S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1No.), complete all as specified and directed.
S& F 30mm thick flush door shutter, membrane doors, decorative finish on one side duly finished and polished and other side all as per manufacturers directions, as per tint/colour including necessary teak wood lipping’s, complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc Sqm divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. sizes of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) and fitted to chowkats, complete all as specified and directed.
S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21, complete all as specified and directed.
S&F aluminium alloy anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheets, cast extruded sections and fixing bolt and sliding bolts of extracted sections, complete all as specified and directed.
S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.
S&F 150mm long aluminium handle, cast type anodised, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150mm size of cover plate, complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including brass brackets, complete all as specified and directed.
S&F in repair prelaminated particle board 19mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work, complete all as specified and directed.
S&F continuous(piano) hinges, brass, bright finish or electro galvanised 40mm width of flap, complete all as specified and directed.
S&F 6mm thick cover fillets of standard hard board, 40mm wide, and fixing with screws, complete all as specified and directed.
M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality, as in doors, window, showcase in aluminium frame work & similar work exc. 0.50 Sqm in each pane including neoprene gasket, complete all as specified and directed.
All as per item No. 91.00 here-in-before but 4mm thick figured glass, pin head type, complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.
S& F 32mm dia aluminium powder coated drapery rod fixed over 1st class hard wood rounded wooden block of 65mm dia and 20mm thick, polished, fixed to stone wall/brick wall using screws incl necesary drilling, complete all as specified and directed. ( Note : Each opening shall have two fillets at both ends.)
S&F aluminium powder coated fancy type brackets suitable for 32mm dia drapery rod, fixed at both ends of openings, complete all as specified and directed
M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)
Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed
Taking out old damaged tarfelt or membran of any description including screed bed or bedding layer and removing of debris to a distance exc. 250m and n. exc. 500m and cleaning roof surfaces to remove all loose dust etc., roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water using wire brush, brooming down and applying the following treatment all as directed in order of precedence as stated: (a) Brushing neat cement slury with 3.0 kg of cement per Sqm. (b) 15mm thick screed bed or bedding layer in CM (1:4) with water proofing compound as per manufacturer instruction on existing roof surface true to level. (c) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.15 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. (iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017. (iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. (vi) WPC shall be measured and paid separately as supply only. (vii) The work shall be executed through authorised applicators of original manufacturer only.
Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation over areas n. exc. 1.5m deep and getting out in soft/loose soil, complete all as specified and directed.
Use & waste formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, breastsummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fare finish surfaces of formwork, complete all as specified and directed.
S & F mild steel TMT bars 10mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed.
S & F mild steel TMT bars 6mm to 8mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed.
All as per item No 104.00 here-in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
M&L for concrete bed to drain pipes, in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), laid in trenches including packing and haunching against the sides of pipes after they are laid and tested, for 150mm bore pipe, complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed.
M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), as in manhole/drain slab cover, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM (1:4), complete all as specified and directed.
S &F 110mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed in floors or trenches, complete all as specified and directed.
S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.
M&L for preparation of old plastered wall surfaces and applying one coat of cement base paint, complete all as specified and directed.
Removing excavated materials to a distance exc. 250m but n. exc. 500m and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.
Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.
M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.
S&F grease traps of fully stainless steel construction, capacity 1200 LPH and size 800 x 400 x 400mm instaled at floor surface, complete all as specified and directed.
Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed.
M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20mm dia with concealed modular box suitable for logic modular switches, sockets, etc and logic modular cover plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for one light point/one fan point controlled by one, one way switches, complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of flush metal box and concealed in wall, including cutting and sinking of boxes and making good to the walls. (ii) Provision of cover plates/sorroundings of any module/blank plates as per site requirement shall deemed to be included in the quoted unit rate.
All as per item No 117.00 here-in before but for 5 Amp switch socket on the same board, complete all as specified and directed.
All as per item No 117.00 here-in before but for 5 Amp switch socket on independent board, complete all as specified and directed.
All as per item No 117.00 here-in before but size of cable 4.0 sqmm with earth wire of 4.0 Sqmm but with independent circuit from the DB, complete all as specified and directed.
Al as per item No 117.00 here-in before but for 2 way point wiring with cable of size1.5 Sqmm with 1.5 Sqmm earth wire suitable for light points at stair case, complete all as specified and directed.
All as per ser item No. 117.00 here-in before but one bell/buzzer point controlled by one push button on the same board with other switches, complete all as specified and directed.
S&F of decorative front plate one module white colour, completes all as specified and directed.
S&F of decorative front plate 3 module white colour, completes all as specified and directed.
S&F of decorative front plate 4 module white colour, completes all as specified and directed.
S&F of decorative front plate 6 module white colour, completes all as specified and directed.
S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed.
S&F switch, modular type, single pole, one way, 15/16 Amps, one module, complete all as specified and directed.
S&F socket outlet modular type, multipurpose, having provision for 3 pin, 5/6 Amp and 2 pin, two module, complete all as specified and directed.
S&F socket outlet modular type, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp two module, complete all as specified and directed.
S&F bell push, modular type, single pole, 5/6 Amp, one module, complete all as specified and directed.
S&F switch modular type, single pole, 2 way, 5/6 Amp, one module, complete all as specified and directed
S&F fan step regulator modular type, two module, complete all as specified and directed.
S&F in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old ceiling fan, any type and deposited to AGE E/M store yard, completes all as specified and directed.
S&F exhaust fan, steel body AC, single phase, 230V of size 300mm sweep with, blades, and frame and louvers including cutting wall for fixing exahaust fan of size 300mm sweep and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site including taking down old exhaust fan, any size and deposited to AGE E/M store yard, completes all as specified and directed.
S&F in ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.
Supply and fixing in replacement angle type lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, completes all as specified and directed.
Supply and fix LED lamp 9 Watt, completes all as specified and directed.
S&F LED lights fitting 1x 20 W, 220V,AC , box type with driver, LED lighting fixture with extruded aluminium channel, including LED tube light of 20watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed.
S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver, LED tube light of 10watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed.
S&F MCB DB, TPN, 4 way IP 43 protection ,double door , concealed on wall, completes all as specified and directed.
S&F MCB DB, SPN, 8 way IP 43 protection ,double door , concealed on wall, completes all as specified and directed.
S&F RCBOs for earth leakage, over load and short - circuit protection 32 Amp DP 100 mA, completes all as specified and directed.
S&F MCB DB, SPN, 4 way IP 43 protection ,double door , concealed on wall, completes all as specified and directed.
S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'B' curve, including connection of testing, completes all as specified and directed.
S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, complete all as specified and as directed.
S&F MCB 4 pole, 63 Amps, 10 KA, 'C' curve, complete all as specified and as directed.
M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn in and including heavy duty PVC casing-caping/PVC conduit not less than 20mm size including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC casing-caping/PVC conduit and its accessories is deemed to be included in the unit quoted rate.
S&F MS box (meter box) of size 600 x 200 x 1000mm (double door) 2.0mm thickness, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealed and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box, electric meters and fixing the new electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing, complete all as specified and directed. Note : (a) Any plastering work involved while taking out old existing meter and refixing the new meter box is deem to be included in this rate. (b) PVC flexible conduit required within the meter boxes is deem to be included in this item rates.
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3cm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20mm bore and watering pipe GI medium grade of 20mm bore and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. Note: (a) In case of satisfactory results not achieved or results degrade during one year of recharging of the earthing, the same shall be made good/recharged again in order to have required test results within contract/defect liability period without any extra cost to the department. (b) Necessary compound required for recharging shall be measured and paid separately.
S&F LED street light 30/35 W IP 65 along with fixing accessories on wall/pole, complete all as specified and as directed.
Taking down single phase electric energy meter any type and refixing, complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core including taking down old unserviceable UG cable, complete all as specified and directed.
Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in deep for foundation etc. or for shaft, wells, cesspits, manhole, pair house etc. n. exc. 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed.
Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.
Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.
Note: An amount of Rs.45119.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S. VINITA CONSTRUCTION
M/S. KUMAR CONSTRUCTION CO.
SHRI D P AGARWAL
MAJUMDER ENTERPRISE
M/S ANIL KUMAR BAUL
M/S RATHIN ENTERPRISES
M/S I P GROUP
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .