REPAIR / MAINT OF ROOF SHEET TILING AND CERTAIN MISC WORK AT SIKH LI REGT CENTRE FATEHGARH

Amount

Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, snap gird and hanger complete all as specified and directed

M&L for 6 mm thik Non asbestos fiber cement building boards fixed with screwed in celling flat or sloping and S&F anodised Aluminium snap grid fram work size of grid 605 x 605mm for false ceilling including hanger, 6 mm dia GI (upto 1200 mm length) adjusting level, cleats made out to GI flat 40x3 mm Size 60mm long fixing with nut bolts etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self m tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall/ridges, fixed with self tapping screws as complete all as specified and directed.

Dismantling timber scantlings in framed work 40 sqcm and over in section, in any position complete all as specified and directed

Dismantling wrought irion / mild steel work of any description not otherwise provided for complete all as specified and directed

M&L For rafter , purlin Making Truss any lenth or any span With Second class Hard Wood and treated with creosote Complete all as specified and directed.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins ,making truss, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E- 250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop complete all as specified and directed.

S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W(Gde-E- 250) quality-A complete all as spoecified and directed

M&L for preparing steel surfaces of any description over 10cm width/ grith and applying two coats of Synthetic Enamel paint over one coat of red oxide primer complete all as specified and directed

Demolition of brickwork masonary built in cement mortar including all quiens arches, pillars etc but excluding concrete articles complete all as specified and directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and fair without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of OBD over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed..

M & L 25 mm thk cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , laid over & including 15mm thick cement screed bed or bedding layer in CM 1:6, etc. complete all as specified and directed by Engr-in-Charge.

M&L Glazed coloured ceramic tiles in vertical surface 350 x 250mm x 7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles as in skirting/dado complete all as specified and directed.

M/S SUNNY ASSOCIATE (BID ID -3260079)

M/S MAMTA CONSTRUCTIONS (BID ID -3265793)

M/S S P CONSTRUCTION (BID ID -3265351)

ASHISH SHARMA (BID ID -3260363)

M/S SRI JAGDAMBE TRADERS (BID ID -3264074)

M/s M S Sharma and Co. (BID ID -3260284)

M/S OMKAR SINGH YADAV (BID ID -3260301)

Shiv Krishan Associates (BID ID -3260509)