REPAIR OF PLASTERING JOINERY SANITARY FITTING WALL PENALLING AND MISC WORKS AT PEDONG DALAPCHANDAP ALGARAH,ALGARAH AND TEESTA TCP UNDER GE 867 EWS

Amount

Demolition of concrete block walling built in Cement mortar, complete all as specified and as directed.

M & L Precast cement concrete (1:3:6) type C-1, (using 20mm graded crushed stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM (1:6), complete all as specified and as directed.

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and directed, complete all as specified and as directed.

M & L 15 mm thick rendering on other than fair faces of brick work concrete surface in CM (1:4) with water proofing compound, complete all as specified and as directed. Note : WPC will be measured and paid separately.

M & L 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including taking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc, complete all as specified and as directed.

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) including taking down cement plaster of any description from stone/PCC block/brick walls incl raking out joints hacking for key, scrubing down with water etc, complete all as specified and as directed. Note - WPC will be measured and paid separately.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed.

M & L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat or alkali resistan primer, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

M & L three coats of white wash on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections incl cleaning for re fixing or removal to store, complete all as specified and as directed.

Refixing old steel tubing of 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc), complete all as specified and as directed.

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down fancy type screwed for iron pipe, complete all as specified and as directed.

S & F in repairs pillar taps cast copper alloy chrominium plated with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed.

S & F in repair 15mm dia two way angle valve cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F in repair 15mm dia one way angle valve cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F in repair 15mm dia brass chromonium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S & F in repair PVC connection pipe 15mm size with PTMT nuts of 600 length, complete all as specified and as directed.

S & F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed.

S & F in repair vitreous china, wash down water closet pedestal pattern, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match over and including 10 mm thick backing coat in CM (1:4), complete all as specified and as directed.

M & L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in CM (1:4), complete all as specified and as directed.

M & L for vitrified ceramic tiles 10 mm thick (square/ rectangular) non skid ceramic coloured tiles light shade 7 to 8 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm, set in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed.

All as per item No. 27 here in before but on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

Demolition of cement concrete(Unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), as in sub base to floors, complete all as specified and as directed.

M&L 40 mm thick Plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement, complete all as specified and as directed.

M & L 75mm thick PCC (1:3:6) type C-2 (40mm graded crushed stone aggregate) in plinth protection, path/steps etc, complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type flushing cistern,10 ltr capacity, low level, white with inlet, ball valve float and handle including brackets and connection to pipes, complete all as specified and as directed.

S & F in repair Vitreous china WHB 550 x 400 mm white flat back including bracked, complete all as specified and as directed.

S & F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M & L for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

M & L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

M & L 75mm PVC (SWR) bends, complete all as specified and as directed.

M & L 110mm PVC (SWR) bends, complete all as specified and as directed.

S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and as directed.

S & F in repair cromium plated health faucet, fancy type, suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixd in position, complete all as specified and as directed.

S & F toilet paper holder with flat recessed type stainless steel, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) n.exc 1.5 sqm each, complete all as specified and as directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each leaf, complete all as specified and as directed.

Taking down shutters of any description area n.exc 1 Sqm of each leaf, complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S & F Pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock strike plate, etc, complete all as specified and as directed.

S & F 30 mm thick flush shutters solid core construction with block board core and ply wood face panel commercial type on both sides, complete all as specified and as directed.

S & F anodised aluminium frame for door windows ventilators with one or more revets including joining clea for fixing etc, complete all as specified and as directed.

S & F anodised aluminium door shutters aluminium section weighing 0.55 kg/mtr including necessary joining cleats glazing clips rubber neoprene packing handles 3 Nos in each doors hinges anodised aluminium snapbeading screws etc, complete all as specified and as directed.

S & F mild steel work as in hold fast & similars articles confirming to Fe 310-0 or Fe 410 - 0, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, complete all as specified and as directed.

S & F 30mm thick 2nd class hard wood plain framed paneled shutter (any numbers of panel) with panel of timbers flat on both sides & fitted to chowkats, complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a), complete all as specified and as directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S & F steel window with side hung shutter, including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

M & L for Mild steel work as in guard bards for window frames confirming to Fe-290 Gde E-165, complete all as specified and as directed.

S & F butt hinges medium weight cold rolled mild steel and fixed to chowkats 100 mm size, complete all as specified and as directed.

S & F in repair butt hinges medium weight cold rolled mild steel and fixed to chowkats 100 mm size, complete all as specified and as directed.

S & F 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F in repair 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S & F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beeds, complete all as specified and as directed.

S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty/ pvc bedding in square exc 0.50 Sqm in each pane, complete all as specified and as directed.

S & F in repairs Drapery curtain rod dia 18-19 mm dia powder coated in colour with fixing brackets, stops rollers etc, complete all as specified and as directed.

M & L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer, complete all as specified and as directed.

Preparation of new or previously un-treated steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete all as specified and as directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified and as directed.

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifications, complete all as specified and as directed.

S&F 4mm thick ply wood 3 nos of ply grade BWR, type BB fixed with nails to timber frame, complete all as specified and as directed.

S&F 6mm thick ply wood 5 nos of ply grade BWR, type BB fixed with nails to timber frame, complete all as specified and as directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M & L 2nd class hard wood in scantling fixed in clean sawn, complete all as specified and as directed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

M/S G. K. SUTHAR (BID ID -3316965)

MANOJ JINDAL (BID ID -3318294)

Sri Gupta Construction (BID ID -3317443)

MS BRAHMA CONSTRUCTION (BID ID -3318303)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3318292)

APARAJITA GROUP OF CONSTRUCTION (BID ID -3318290)

RAMESH GURUNG (BID ID -3318310)