Renovation of Lav Blocks 3 Nos. (Ladies and Gents) at Sri Anandpur Sahib, Block Sri Anandpur Sahib, Distt. Rupnagar (Under Head 4215 Specific Town)

Eurpoean/Indian/Orissa W.C.,

CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm ofapproved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entiresatisfaction of Engineer-in-charge.

Size 450mmx300mm

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.

C.P. Brass khunti with 4 pegs

Acrylic towel Rails size 20mm dia 600mm long

PTMT Tap/Bib cock

Upto 500 ltr capacity tank

For 1000 ltr capacity tank and above

Single Tee

Door Elbow 90 degree (all side socket)

Elbow 90 degree (all side socket)

Coupler

P Trap/Floor Trap 110mm x 110mm

P Trap/Floor Trap 110mm x 75mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing in position SS Grating with frame of pproved make (to the approval of engineer in charge) complete in all respects.

Providing and Fixing aluminium doors along with chakath.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. (Also not to used over footoaths).

Providing and laying Anti skid Ceramic floor tilesof size 300x300 mm x 10 mm thick of 1st qualityconforming to IS : 15622 of approved make incolours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in12.5mm thick cement plaster 1:3 in base andjointed with @ 3.3 kg/sqm including pointing thejoints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Slab sizes from 0.30 sqm to 0.50 sqm.

In cement

Reinforced Cement concrete

White wash and colour wash

Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: (a) Applying a slurry cost of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in- charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/ brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement :5 coarse sand) admixed with water proofing ompound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement L5 coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer.

Reinforced cement concrete approach slab using M-25 grade concrete, including reinforcement and formwork complete as per drawing and Technical specification

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

NS providing and fixing in possition CI gully trap cover weighing appro. 12 kg and frame for gully trap chamber clear opening size 500 mm into 500mm and out side size 550 mm into 550 mm including painting the each exposed surface with 3 coats of blck bitumentsic supreior paint of approved manufacture in all respects

Heavy duty

12.5 mm thick cement plaster 1:4

160mm o/d pipe

Inside size 75x120 cm and 120 cm deep

Through wall 11.43 cm thick

Through wall 22.86 cm thick

Through wall 34.29 cm thick

Through wall 45.72 cm thick

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Depth upto 3 m.

Providing and fixing pvc pipe for wiring and 4mm cable including earting, switch boards, lights, switches and connection of ectricity etc complete in all respects. (900 mtr)

Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing in position C.I. gully trap cover weighing approximately 12 kg and frame for gully trap chamber clear opening size 500mm x 500mm and out side size 550mmx550mm including painting the exposed surface with 3 coats of black bitumastic superior paint of approved manufacture etc.

75mm o/d single socket SWR UPVC pipe lines laid complete

Size 75 mm x 75 mm

With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)

100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

c) C.P.brass 15mm Angle valve without flange

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

110mm o/d pipe

Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.

All kinds of soil except rocky

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.

15mm i/d G.I. Union

20mm i/d G.I. Union

25mm i/d G.I. Union

40mm i/d G.I. Union

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring light point

Wiring 16/20Amp. power plug control point

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thim

TP&N Vertical Double Door Distribution Board 4 way each

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

Doors of area 3 sqm and below.

Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth.

0-10.0 km ( Carriage of earth filling)

0-15.0 km ( Carriage of sand and agreegate )

Loading and unloading of builiding rubbish

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.

40mm i/d Gun Metal peet valve heavy pattern.

40mm i/d Gun Metal peet valve heavy pattern.

Add for deduct the cost of dismantled material (-)