Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC NO 353 DIGLIPUR 1 DIGLIPUR NORTH MIDDLE ANDAMAN 744 202 | NORTH AND MIDDLE ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.1 L+₹44,950 (9.71%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹5.7 L+₹1.0 L (22.1%)Rejected-Finance SUBAN BAZAAR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹5.8 L+₹1.2 L (26.0%)Rejected-Finance | L4 | Rejected-Finance Not L1 | |
| 5 | L5₹6.0 L+₹1.4 L (29.8%)Rejected-Finance | L5 | Rejected-Finance Not L1 |
Tender Value
₹4.9 L
EMD Value
₹10,000
Closing Date
9 Sept 2020, 6:00 pmClosed
Garrison Engineer South Diglipur
GARRISON ENGINEER SOUTH DIGLIPUR PROTHRAPUR PORT BLAIR 744105
REPAIR TO WOODEN AND STEEL FURNITURE INCLUDING POLISHING, PAINTING AT CGDHQ-9 DIGLIPUR
2020_MES_368965_1
8811/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Port Blair
ALL BIDDERS ENLISTED WITH MES IN CLASS E AND CAT di AND UNENLISTED BIDDERS MEET MES ENLISTMENT CRETERIA OF CLASS E AND CAT di REFER NIT
6 documents required · 6 mandatory
₹500
Garrison Engineer South Diglipur
₹10,000
Yes
26 Oct 2020
13 Aug 2020
14 Sept 2020
13 Aug 2020
9 Sept 2020
27 Aug 2020
14 Aug 2020 - 18 Aug 2020
Amount
PART-I : REPAIRS TO WOODEN FURNITURE S & F with new components 1st class teak wood (Mainland or Paduak of A&N Island) or as per the required sizes mentioned in the drawings including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed. Chair dining (FD-279) Rear leg (Size 30 mm x 55 mm x 890 mm)
Description all as per item No. 1 above, but Front leg (size 30 mm x 65 mm x 460 mm)
Description all as per item No. 1 above, but Seat side rail (size 30 mm x 65 mm x 430 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Front rail (size 30 mm x 65 mm x 440 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Rear rail (size 30 mm x 65 mm x 405 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 1 above, but Side stiffener (size 20 mm x 25 mm x 430 mm)
Description all as per item No. 1 above, but Centre stiffener (size 25 mm x 20 mm x 440 mm)
Description all as per item No. 1 above, but Back rest 45 mm x 15 mm curved out of size 45 mm x 35 mm x 405 mm
S & F new cane with approved plastic cane of 2 mm wide, 0.5 thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around after polish work as shown in the drawing, including removing worn out unserviceable cane from furnitures. Chair dining (FD-279)
S & F with new components 1st class teak wood (Mainland or Paduak of A&N Island) or as per the required sizes mentioned in the drawings including dismantling of unserviceable components or borer eaten parts of following furniture items carefully without disturbing the adjoining parts. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as per directed. Chair easy (FD-229) Rear leg (size 55 mm x 25 mm x 490 mm)
Description all as per item No. 10 above, but Front leg (size 55 mm x 25 mm x 545 mm)
Description all as per item No. 10 above, but Seat side rail (size 70 mm x 40 mm x 575 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Seat front rail (size 55 mm x 25 mm x 510 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Seat rear rail (size 50 mm x 25 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back frame (size 55 mm x 20 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back bottom frame (size 55 mm x 40 mm x 480 mm) including drilling of holes @ 12.5mm C/C for canning
Description all as per item No. 10 above, but Back side frame (size 70 mm x 25 mm x 440 mm)
Description all as per item No. 10 above, but Wooden member (size 20 mm x 15 mm x 440 mm) screwed to side frame
Description all as per item No. 10 above, but Arm rest (size 65 mm x 25 mm x 610 mm)
Description all as per item No. 10 above, but Front/back base stiffener (size 50 mm x 25 mm x 510 mm)
S & F new cane with approved plastic cane of 2 mm wide, 0.5 thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after polish work, including removing worn out unserviceable cane from seat of furnitures. Chair easy (FD-229)
S & F new cane with approved plastic cane of 2 mm wide, 0.5 thickness half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after polish work, including removing worn out unserviceable cane from back of furnitures. Chair easy (FD-229)
PART- II : POLISHING & PRESERVATION Material and labour for preparation for scrapping of following wooden furniture by all means with abrasive paper and filling the gaps or depressed surfaces with BEE wax and making the surfaces smooth, and thereafter apply Teak wood coats of French polish to a glossy finish and as directed by the Engineer-in-charge. Work will be executed where furniture exist at different locations under jurisdiction of GE South Port Blair. Chair Dining FD-279/357
Description all as per item No. 23 above, but Chair easy FD-227/358
Description all as per item No. 23 above, but Chair writing (all patterns) FD-280
Description all as per item No. 23 above, but Sofa set 5 seater (3+1+1) FD-281
Description all as per item No. 23 above, but Table dining for 6 persons FD-273
Description all as per item No. 23 above, but Table Centre FD-274
Description all as per item No. 23 above, but Table writing FD-249
Description all as per item No. 23 above, but Table dressing ladies FD-378
Description all as per item No. 23 above, but Teapoy FD-278
Description all as per item No. 23 above, but Locker bedside wooden (both internal and external) FD-54
Description all as per item No. 23 above, but Table Conference FD-287
PART-III : REPAIRS TO STEEL FURNITURE S& F with new components as mentioned in the drawing including dismantling unserviceable components carefully without disturbing the adjoining parts and Chair verandah (MAP) (FD/E6/MAP/11) Remove the broken seat and Supply and fix of approved make PVC seat cover.
Description all as per item No. 34 above, but Remove the broken back and Supply and fix of approved make PVC back cover
Description all as per item No. 34 above, but S&F PVC hard shoe cap, duly removing worn-out one PVC hard shoe cap
Description all as per item No. 34 above, but M&L for smooth the lateral surface of chair with machine paper and paint chair with white enamel paint
S& F with new components as mentioned in the drg. All joints to be fixed with arc welding and level the surface smooth with stone paper machine required during repair as directed, including dismantling unserviceable components and worn-out cane of following items carefully without disturbing the adjoining parts. Chair CB Steel with arms and without arms (FD-75(M)) Dismantle rusted leg or seat or back rest frame of chair with hack-saw blade and MS conduit pipe 25 mm dia, 16 G (1.6 mm thick) of required length to fixed, duly welded and painted with one coat of red oxide.
M&L for Smooth the lateral surface of chair with machine paper and paint chair with OG/SG enamel paint
Supply and fix of seat frame made out of 1st Class Teakwood frame and canned with 2 mm wide and 0.4 mm thick half-round of approved colour and 4 mm wide thick frame for borders and frames shall be polished or painted as required and fixed with 4 No GI Nut, bolt and washer of size 3" long, including remove worn out seat frame.
Supply and fix of back frame made out of 1st Class Teakwood frame and canned with 2 mm wide and 0.4 mm thick half-round of approved colour and 4 mm wide thick frame for borders and frames shall be polished or painted as required and fixed with 4 No GI Nut, bolt and washer of size 3" long, including remove worn out back rest frame.
S&F Arm rest made out of 1st class Teakwood, French polished and fixed with MS screws in lieu of broken arms
S&F Hard rubber bush with MS screws in lieu of worn out one rubber bush.
S&F Hard rubber cap for rear leg top side to be fixed for open end of the conduit pipe
Steel almirah large/medium (FD-1031 / 1032) Supply and fix new 6 lever lock with duplicate Flat key (2 Nos of key) Make Godrej/Bharat or Equivalent of existing size fixed with screw/ welding to shutter of almirahs all as specified and directed by Engr-in-Charge, including removing old unserviceable locks from Almirahs.
Supply and fix new assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed by Engr-in-Charge, including removing old unserviceable 3-way Assembly from Almirahs.
Supply and fix new Godrej pattern handle with necessary fittings of approved quality all as specified and directed by Engr-in-Charge, including removing old unserviceable broken handles from Almirahs.
Supply and fix new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified, including removing the unserviceable/rusted bottom from Almirahs steel.
Supply and fixing the new legs made out of 1.5 mm thick MS sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red oxide primer all as specified, including removing the existing unserviceable legs from Almirahs steel.
Supply and fix new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded and all as specified and directed by Engr-in-Charge, including removing old broken hinges of Almirahs steel.
Supply and fix new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts all as specified and directed by Engr-in-Charge, including removing the unserviceable shelves from Almirahs steel.
M& L for removing worn-out doors shutter of Almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges all as specified and directed by Engr-in-Charge.
M& L for removing the existing dented shelves from Almirahs steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed by Engr-in-Charge.
Repairs to Charpoy GI Newar (FD-220) Supply and fix 12 mm thick BWR Plywood Size 1980 x 900 mm of approved make Type A / AA (approved brand i.e., Greenply/ Kitply/ Century /Sylvan/National/Assam ply/Archid/Alishan) made from the standard size 7' x 3' by removing existing newar from charpoy GI Plytop with edges rounded at four corners including fixing with new MS Nut, bolt 65x3 mm & washer Qty 10 No each and painting the existing Square pipe frames beneath the Plytop
Supply and fix of new 32 mm dia GI Pipe medium grade long rail 1980 mm length (approved brand i.e., TATA / JINDAL / BANSAL / BST / ZENITH / PRAKASH / NEZONE), duly threaded the ends upto 22 mm size as shown in the drawing and as directed by the Engr-in-charge, including removing the unserviceable long rail (those thread ends were broken either at one end or both side) by loosing existing check nut and elbow.
Removing the unserviceable short rail (those thread ends were cracked) and fixing of 32 mm dia GI Pipe medium grade short rail 900 mm length made out of long rail retrieved from item No. 55, duly threaded the ends upto 22 mm size complete irrespective of what is shown in the drawing
Removing existing unserviceable legs and fixing of leg 440 mm length made out of long rail retrieved from item No. 55 or short rail retrieved from item No. 56, duly provided with MS base plate 6 mm welded & painted with two coats black paint.
Supply and fix of new 36 mm dia 3-way elbow (ISI brand), having 32 mm bore for the joints of long/short rails as shown in the drg including dismantling unserviceable 3-way elbow.
Supply and fix of new 6mm thick check nut for the corner joints of long/short rails as shown in the drg including dismantling unserviceable check nut.
S&F 25 mm square MS Pipe of 1.6 mm thick short rail 890 mm (approved brand : TATA / SAIL / JINDAL / BST / SHYAM STEEL / BHUSAN) duly welded the ends to the long rail at an equal distance as shown in the drg for resting the Ply top and connecting to 32 GI Pipe from underneath rails for better grip while placing the Ply top
M&L for applying one coat of red/zinc oxide primer and two coats of black paint to the short rail square pipes fitted under item No. 60 above.
Table Office Clerk Steel FD-(84M) Table top size 1200 x 610 mm for Table clerk steel / typist steel 18mm thick PLPB (OST) Exterior grade and provide 4mm thick teakwood beading alround the top including polishing.
Description all as per item No. 62 above, but Replacement of locks 4 lever with flat type SS key in duplicate Make : Godrej / Bharat or equivalent
Description all as per item No. 62 above, but Drawer of tables office clerk steel as per drg duly painted with red oxide and 2 coat of OG paint
Description all as per item No. 62 above, but Supply and fix hard rubber shoes to bottom of legs in shape of square 25 mm
Table Office Officer Steel FD-(1003) Table top size 1680 x 870 mm for table office officer steel of PLPB (OST) Exterior grade 18mm thick and provide 4mm thick teakwood beading alround the top including polishing.
Description all as per item No. 66 above, but Replace of leg size 25 Sqmm MS pipe 16 Gauge thick as per standard drgs.
Description all as per item No. 66 above, but Replacement of locks 4 lever with flat type SS key in duplicate Make : Godrej / Bharat or equivalent
Description all as per item No. 66 above, but Replacement of drawer of tables office clerk steel as per drg duly painted with red oxide and 2 coat of OG paint
Description all as per item No. 66 above, but Supply and fix hard rubber shoes to bottom of legs in shape of square 25 mm
SOFA SET 3/5 PERSON WITH CUSHION FD-281 Replacement of unserviceable cushion with size 21''x22''x100mm cool foam cushion of 40 density Make: Kurlon / Century / Sleepwell / feather foam make including providing initial white marking (kora) cloth cover inside to stitched and there after cover with new tapestry (as suitable for sofa cushion the cost of acrylic tapestry should not be less than Rs. 350 per metre (48 wide cloth)
PART-IV : PAINTING STEEL FURNITURE M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty wherever required and one coat of synthetic enamel paint of approved shade of approved make & quality inside and outside of steel furnitures all as specified and as directed by Engr-in-Charge. Rack steel adj 6 tier FD-106
Description all as per item No. 72 above, but Table Office Clerk Steel FD-(84M)
Description all as per item No. 72 above, but Table Office Officer Steel FD-(1003)
Description all as per item No. 72 above, but Table Steel 900x900x760 mm (FD-1009)
Description all as per item No. 72 above, but Rack shoe steel (FD/E6/MAP/2/2)
Description all as per item No. 72 above, but Steel almirah large (FD-1031)
Description all as per item No. 72 above, but Steel almirah medium (FD-1032)
Description all as per item No. 72 above, but Rack steel 2175X900X500 mm (FD-106)
Description all as per item No. 72 above, but Side Rack steel FD-97(M)
KML CONSTRUCTION
MOHAMMED SAFIQUE
AK TRADERS
M/s Pintu Furniture
M/s Nikitha Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .