Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹40.9 L+₹2.6 L (6.87%)Rejected-Finance 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹46.0 L+₹7.7 L (20.1%)Rejected-Finance 129 STREET NO 3 3 GREEN AVENUE BIBI WALA ROAD BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹48.5 L+₹10.3 L (26.8%)Rejected-Finance | L4 | Rejected-Finance Awarded being 4th Lowest Bidder | |
| 5 | L5₹49.0 L+₹10.8 L (28.1%)Rejected-Finance | L5 | Rejected-Finance Awarded being 5th Lowest Bidder |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
25 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S K Yadav GE(S) BATHINDA
GE(S)Bathinda bathinda Mil Stn
GE(S) BTD TOKEN NO 76 OF 2023-24 PROVISION OF CERTAIN REVENUE AND MINOR WORKS UNDER AGE BR II AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_620676_1
GE(S)/BTD/TOKEN NO 76 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class D
category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹94,000
Yes
7 Dec 2023
26 Sept 2023
27 Oct 2023
26 Sept 2023
25 Oct 2023
17 Oct 2023
Amount
Taking Down Chowkhats or Frame with Shutttter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site etc complete all as specified and as directed.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement, etc complete all as per specified and as directed.
Rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound, etc complete all as specified and as directed.
Taking Down Chowkhats or Frame with Shutttter ( with out taking out shutter from the frame ) exc 1.50 sqm not exceeding 4.0 sqm each as doors , windows aaa& ventilators etc and removal from site etc complete all as specified and directed.
S&F pressed steel frames of size 125x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 complete all as specified and as directed.
M&L for rendering 5 mm thick in cement mortar in (1:3) finishing the surfaces even and smooth on ceiling etc complete all as specified and as directed.
S&F 2nd Class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial Ply of 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kin seasoned and chemically pressure treated etc complete all as specified and as directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm etc complete all as specified and as directed.
S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm etc complete all as specified and as directed.
S & F 150 mm mild steel pressed handles, oval type, stove enamelled black etc complete all as specified and as directed.
Factory made Steel Window box type using ERW hollow 'P' section comprising double frame for and including gauged and skelton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bar , fixed horizontally @10mmc/c hinges , handle tower bolts stops lugs etc complete all as specified and directed.
S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads including Provn of glazing pins/spring clips wherever necessary complete etc complete all as specified and as directed.
S & F 4 mm thick figured glass, pin head type and glazing with oil putty in ventilator etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 KM etc complete all as specified and as directed.
S&F glazed ceramic coloured tiles 450 x 350mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 10 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile etc complete all as specified and as directed.
S&F in Repair Double Bowl Sink made of 1 mm thick Stainless steel sheet of size 114 mm x 45mmx22 mm fixed complete with easte pipe and Coupling of specifiec size etc complete as specified and as directed.
Supply and fixing only 15mm bore chromium plated, fancy type, quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified as directed.
S&F in repairs, PVC connections 15mm bore, 450mm length, heavy duty with PTMT nuts etc complete all as specified and as directed.
S&F in repairs stop valves, chromium plated, angular type, quarter turn, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore dia of pipe etc complete all as specified and as directed.
S&F in repairs, 15 mm bore chromium plated, fancy type, quarter turn, bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe, or for brass ferrule etc complete all as specified and as directed.
S&F grating doom 125 mm dia grating with or without wastehole ptmt etc complete all as specified and as directed.
Taking up or down GI tubing 15 mm bore pipe including cleaning for refixing and removal to store etc complete all as specified and as directed.
Taking up or down GI tubing 20 mm bore pipe including cleaning for refixing and removal to store etc complete all as specified and as directed.
M & L for 15 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
M & L for 20 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
M & L for 32 mm bore GI pipe, medium grade, ISI marked, with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
M&L for 70 mm thick plain cement concrete Type B-0, 1:2:4 (12.5mm graded aggregate) as in sub base or staging for water tanks etc complete all as specified an directed.
M&L for Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise including reinforcement is cut through area exc 100 Sqcm but not exc. 250 Sqcm complete all as specified an directed.
Taking down rain water pipe and evas gutters (any size and pattern) incl all fittings heads shoes bends swan necks etc complete all as specified and as directed.
S&F PVC (SWR) 110mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls with MS Clamps as directed by 6 kg /Sqm etc complete all as specified and as directed.
S&F 110 mm bore pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes etc complete all as specified and as directed.
S & F in repairs vitreous china wash hand basin, white, of size 550mm x 400mm , excluding waste, chain and plug and porcelain stopper but including 32 mm dia etc complete all as specified and as directed.
Dismentalling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall , laid in trenches incl all fittings and accessories etc complete all as specified and as directed.
S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches etc complete all as specified and as directed.
S & F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door etc complete all as specified and as directed.
S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.
S&F 100 mm bore CI cowl etc complete all as specified and directed.
M&L for 100 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed.
M&L for 100 mm dia of CI P trap long with grating incl jointing to waste pipe fixed in cement mortar 1:2:4 type b 1 in repair complete all as specified and directed.
M&L for extra joints over cast iron pipe 100 mm bore pipes bend joints etc is provided epoxy joints in lieu of cement joint etc complete all as specified and as directed.
Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site etc complete all as specified and as directed.
S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified and as directed.
S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 210 gram) etc complete all as specified and as directed.
S & F Gun metal globe or Gate valve , with iron wheel , screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe etc complete all as specified and as directed.
M&L preparation of untreated steel surface of any description & applying two coats of synthetic enamel paints over red oxideprimer includ preparation of surface etc complete all as specified and as directed.
S&F for Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed.
Preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Complete removal of existing treatment including filling depression with wall putty two coats on Old external wall surfaces of any description, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following:- (a) M&L two coats of exterior acylic emulsion by using Airless spray and incl a coat of acrylic emulsion external primer etc complete all as specified and as directed.
Preparation of New external plastered wall surface complete all as specified complete all as specified and applying the following:- (a) Applying wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of exterior acylic emulsion by using Airless spray and incl a coat of acrylic emulsion external primer etc complete all as specified and as directed.
Complete removal of existing treatment on Old Internal wall surfaces of any desciption, preparation of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology, complete all as specified and applying the following :- (a) M&L for wall care putty in two layers on wall surface and smoothening the surface with sand papers / Mechanised sanding etc preparatory to paint as directed complete all as specified (b) M&L for two coat of Oil Bound distemper of approved tint over a coat of primer on old prepared surface by using Airless spray etc complete all as specified and as directed.
Preparation of New plastered Internal wall surface complete all as specified complete all as specified and applying the following:- (a) M&L wall care putty in two coats on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) M&L two coat of Oil Bound distemper over a coat of chalk whitening priming by using Airless spray etc complete all as specified and as directed.
Applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified and directed.
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.
Marble work (Udaipur green slabs) 15 to 18 mm thick (table rubbed and polished) as in cooking platforms and provide hole for gas pipe like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edges over screed bed etc complete all as specified and directed.
Pre-polished kota stone 20-25mm thick as in flooring, cills and stair case over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete all as specified and directed.
Pre-polished kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.
M&L for Complete removal of existing treatment of any description on old wall surfaces plastered or unplastered surfaces of walls and applying two coat of cement base paint on walls including cornices etc complete all as specified and directed.
Complete removal of existing surface finishes of ceiling and applying two coat of white wash on old plastered ceiling surfaces etc complete all as specified and directed.
S&F anodized aluminium partition powder coating of any colour (thickness of powder coating not less than 50 micron) fixed type with out sach bar, aluminium section weighing 0.55 kg/m including necessary joining etc complete all as specified and as directed.
S&F 5.50mm thick sheet glass ordinary quality and glazing with beads fixed with metal pins etc complete all as specified and as directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m depth for foundation etc. and getting out in soft/loose soil etc complete all as specified and as directed.
M & L for PCC (1:5:10) type E-2, using 40mm graded stone aggregates as in foundation filling & mass concrete etc complete all as specified and as directed.
M & L 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base for flooring, etc complete all as specified and as directed.
Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, etc complete all as specified and as directed.
M&L for providing RCC M25 design mix as in footings , foundations beams , plinth beams etc complete all as specified and directed.
M&L for providing RCC M25 design mix as in columns , pillers , piers , posts and struts complete etc complete all as specified and directed.
M & L for providing RCC M 25 using 20 mm graded aggregate in for beams, cantilevers, bressummers, lintels, etc complete all as specified and as directed.
M & L for providing RCC M 25 using 20 mm graded aggregate in for slab supported on walls, etc complete all as specified and as directed.
M&L for form work to sides of foundation sides & sofits of foundation beams plinth beam etc and similar work verticle or batter for rough finished surface of concrete flats complete all as specified and as directed
Use and waste Formwork to sides of pillars, posts, struts, piers,columns, and stanchionsfor fair finished surfaces of concrete , square, etc complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick flat fair finished surfaces of concrete, etc complete all as specified and as directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide, etc complete all as specified and as directed.
Formwork to sides and soffits of Roof beams,Gable beams & lintel beam rough finished surfaces of concrete, etc complete all as specified and as directed.
S&F Mild steel bars TMT 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe - 410 - 0 or Fe - 310 - 0 etc complete all as specified and as directed.
Same as item No. 77 above but 8 mm dia stirupps , spacers and binders complete all as specified and as directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squaretube, suppling fixing in opening as specified and dirction, etc complete all as specified and as directed.
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed.
S&F aluminium anodised 100 mm long butt hinges with galvanised mild steel screws etc complete all as specified and as directed.
S&F aluminum anodised tower bolts 150 mm long etc complete all as specified and as directed.
S&F aluminum anodised tower bolts 200 mm long etc complete all as specified and as directed.
S&F aluminum anodised handles , cast type anodised 125mm long etc complete all as specified and as directed.
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, etc complete all as specified and as directed.
M & L hard core of gauge not exceeding 63 mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface with stone boulders, etc complete all as specified and as directed.
M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified. Note : Using only course sand in screed bed, etc complete all as specified and as directed.
M&L Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and as directed.
S&F vitreous china squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest and 'P' or 'S' trap including Cement concrete bedding , connecting flushing pipe and `P' trap, etc complete all as specified and as directed.
S & F 10 litre capacity PVC valve less syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets, etc complete all as specified and as directed.
S&F 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, etc complete all as specified and as directed.
S & F cast copper fancy type chromium plated alloy bib tap for 15 mm bore of pipe screwed down, screwed for iron pipe or for brass furrel and fixed etc complete all as specified and as directed.
S & F cast copper alloy chromium plated fancy type stop valves for 15 mm bore of pipe screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.
As per item serial No 94 above but 20mm concealed type etc complete all as specified and as directed.
S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches etc complete all as specified and as directed.
S & F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door etc complete all as specified and as directed.
S&F 75 mm dia CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, etc complete all as specified and as directed.
S&F 75 mm bore CI cowl Complete all as specified and directed
S&F pressed steel frames of size 105x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 etc complete all as specified and as directed.
M&L PCC 1:3:6 type c-1 using 20mm graded stone aggreegates for filling in bed block of hold fast etc complete all as specified and as directed
S&F brass chromium plated shower rose 125 mm size with or without swivel joints fix to steel pipe or union complete all as specified and directed
PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection, etc complete all as specified and as directed.
M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint, etc complete all as specified and as directed.
M & L preparation of newly plastered surfaces of wallsand applying three coat of white wash on walls, etc complete all as specified and as directed.
M & L returning filling including spreading levelling watering and well ramming in layers n exc 25 cm in soft/loose soil, etc complete all as specified and as directed.
M & L removing excavated material exc 250n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point, etc complete all as specified and as directed.
Supply only liquid integral water proofing compound of approved quality and make confirming to IS etc complete all as specified and as directed.
S & F vitreous china white wash hand basin white flat back size 450 x 300 mm excluding waste chain and plug on porcelain stopper butt including brackets, etc complete all as specified and as directed.
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed.
S & F pillar taps cast copper alloy chromium plated fancy type with Capstan Head CP fixed connects with 15mm dia bore of pipe, etc complete all as specified and as directed.
S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.
S & F PVC connections 15 mm dia with PTMT Nuts of length for 600 mm Long, etc complete all as specified and as directed.
S&F urinal spredaer of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms), etc complete all as specified and as directed.
M & L for 10user 2000 ltrs capacity FRP moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favorable conditions, process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet-outlet short circuit of wastewater which is prevented to ensure long and enough retention time for effctive treatment, thus the effluent does not contain any solid or scum that could clog up the pipe line. The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludge). The liquid wates are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment, process is known as primary treatment some bacteria and viruses are adsorbed onto solid particles and held in the sludge or scum layers, allowing for limited removal of disease cusing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use including PCC 1:4:8 below foundation and vent shaft connection, including excavation returning and filling, removal of excess soil, connection to existing sewage line including site clearance etc. complete all as specified and directed.
M & L for soakage well of size 1.8 mtr dia x 3.0 mtr effective depth including excavation in any type of soil, foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, inter connecting pipe of RCC/DWC complete filled with brick bats as per drawing as per CE BTD-827 complete all as specified & directed
Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete type D-2 1:4:8 using 20 mm graded curshed stone aggregates for 150mm bore pipes, etc complete all as specified and as directed.
Salt glazed stoneware (SGSW) grade `A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc all as specified and shown drawings (Concrete bed shall be assured and paid for separately), etc complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, etc complete all as specified and as directed.
S&F Anodised aluminium snap grid (Size of grid 605 x 605mm) frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
S&F 4 mm thick Non asbestos fibre cement building boards as in false ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws
M&L preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed.
M&L Preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescence, salt and trading oil and greasy spouts and applying Two coat of white wash on walls including cornices etc complete all as specified and directed
Excavating over areas n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas exc 1.5m but n.exc 3m deep and getting out in soft/loose soil complete all as specified and directed.
M&L Reinforced cement concrete M-30 design mix using 20mm graded stone aggregate in footings, plinth beams of static water tank complete all as specified and directed.
M&L Reinforced cement concrete M-30 design mix using 20mm graded stone aggregate as in walls, retaining walls, basement walls and the like any thickness, above top of footings, including attached pilasters and buttresses for static water tank complete all as specified and directed.
M&L Form work to sides of chimneys and shafts, vertical or to batter, circular on plan, rough finished surface of concrete complete all as specified and directed.
M&L form work to sides of retaining structure well, vertical or to batter, circular on plan, rough finished surface of concrete complete all as specified and as directed.
Surface excavation n exc 30cm deep and averging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.
Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment all as pecified and directed.
M & L for precast cement conc blocks with cement concrete (1:2:4 type B-1 using 20mm graded stone aggregate) as in Kerb stone including chamfers, weatherings, etc set in CM 1:6 etc complete all as specified and as directed.
Demolition of brick work build in cement mortar, etc complete all as specified and as directed.
M & L brick work with sub class 'B' bricks straight or curved on plan exc 6.0 m radius built in cement mortar 1:4 etc complete all as specified and as directed.
M & L brick work with sub class 'B' bricks straight or curved on plan exc 6.0 m radius built in cement mortar 1:6 etc complete all as specified and as directed.
M & L 15 mm thick cement plastering in CM 1:4 with water proofing compound (WPC) on fair faces of brickwork or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed.
Supply only water proofing compound ISI marked etc complete all as specified and as directed.
S&F SFRC (Steel fibre Reinforcement concrete cover and frame) HD-20mm, ISI marked conforming to IS-12592, graded rectangular clear opening 560x560mm and circular in size and fixed over manhole after demolition of PCC coping and manhole cover and set in CM 1:4 incuding PCC benching in CM (1:2:4) and finishing smooth Note: reinforcement, concrete, form work and handles paid under relavent items) etc complete all as specified and as directed.
De-sludging from existing, Manholes of any capacity size and depth including disposal of sludge etc and taking off the manholes cover and placing it in the same position (if required) after taking out sludge, through mechanically sewage suction pump and directly store in covered containder etc, including pugging of existing line and removal of same if required for emplying the manhole and connection of new line in same manhole complete and remokving the sludge in covered van/trolly outside the MOD land etc complete all as specified and as directed.
M & L PCC type B1 1:2:4 (20 mm graded aggregate) as in coping, bencing in manholes etc complete all as specified and as directed.
M & L extra for forming of fair finish drain or channel 30 cm innder girth including forms, moulds, mit-tred/ stopped extra etc complete all as specified and as directed.
M&L Cement concrete Type C2 , 1:3:6 in foundations, filling and mass concrete (40 mm graded aggregate) etc complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade Fixed with grey cement and pigment etc complete all as specified and directed.
M&L for kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc complete all as specified and as directed.
M&L for prepration of new plastered or concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed
M&L Cement concrete Type B2, 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete, etc complete all as specified and directed
M&L Cement concrete Type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete, etc complete all as specified and as directed.
M&L Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick, etc complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, etc complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde?E- 250) quality?A?etc complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. etc complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified
M & L cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqirued etc complete all as specified and as directed.
M & L Cutting opening through brick walls made in cement mortar or cement lime mortar for door, window and other opening or enlarging existing openings, converting window into door openings, etc, or cutting out defective brick work for under -pinning including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks hard - core, etc to store and rubbish not exc 50m etc complete all as specified and as directed.
M & L forming jambs, etc in cement mortar 1:4 to opening (to foregoing items) including cutting, toothing and properly bonding into old work, also facing, joining and pointing to match existing work, etc complete all as specified and as directed.
M & L providing precast cement concrete in window or door cills lintels, bressumers steps, quoin blocks (for use with masonry), string courses, coping kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bounders (for stone walling), corbels, brackets, etc, etc complete all as specified and as directed.
M & L for preparation and applying two coat of Arcylic emulsion distemper over a coat of primer of approved tint 1 mm thick wall care putty on new plastered surfaces of wall etc complete all as specified and as directed.
M & L for preparation and applying two coat of acrylic emulsion distemper on old plastered surfaces of walls etc complete all as specified and as directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc etc complete all as specified and as directed.
S&F powder coated anodised aluminium door, window and ventilator shutters, glazed/ guazed side / top hung type without sash bars, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings, such as hinges type B-21 100mm long (3 no) suitable handle ( 1 no) in each shutter etc complete all as specified and as directed.
S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts our on bolt plate and two on staple etc complete all as specified and as directed.
Excavation in trenches in any type of soil, n exc 1.5 m wide and n exc 1.5 m in depth for pipe line, etc, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point etc complete all as specified and as directed.
M&L for point wiring with milti-stranded copper conductor single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor sinlgle core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame and cover plate (suitable for modular switch/ sockets) comprising the following :- One light point controlled by one switch or one fan point controlled by one switch and fan regulator etc, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq.mm (nominal area) cable as earth continity conductor, in concealed conduit all as specified.
One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq.mm (nominal area) cable & 2.5 Sq.mm (nominal area) cable as earth continity conductor, in and including rigid non metalic PVC medium duty concealed conduit etc complete all as specified and as directed.
One Socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq.mm (nominal area) cable & 2.5 Sq.mm (nominal area) cable as earth continity conductor, in and including rigid non metalic PVC medium duty concealed conduit etc complete all as specified and as directed.
S&F switch modular type single pole, one way, 6 Amp, one module, etc complete all as specified and as directed.
S&F switch modular type single pole, one way, 16 Amp, one module, etc complete all as specified and as directed.
S&F switch outlet modular type, multipurpose, 3 pin, single pole one way 6 Amp, two module, etc complete all as specified and as directed.
S&F switch outlet modular type, multipurpose, 2/3 pin, single pole one way 6/16 Amp, two module, etc complete all as specified and as directed.
S&F ceiling rose, 3 phases.PVC/polycarbonate, isolated body etc complete all as specified and as directed.
S&F sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar cmplete made out of CRCA sheet Factory made including blanking plate for unused module etc complete all as specified and as directed.
S&F MCB 6-31 Amp 240V SP 10 KA 'C' series etc complete all as specified and as directed.
Supply, laying, jointing and testing cable PVC insulated, screened, PVC bedded, electric power cables (heavy duty) 1100 volts grade with standed copper conductor of size 16 sqmm 4 core sectional area laid in trenches or in duct/passed through pipes or fixed to walls/poles etc complete all as specified and as directed.
M & L for earthing with galvanized steel plate electrode 60cm x 60cm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth strip 25x4 mm by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 40 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board/LT Panel and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.
Supply and fixing 4mm dia galvansied iron earth continuity conductor or main earthing lead fixed to wall on batten and drawn through PVC conduit/pipe etc complete all as specified and as directed. Note:- The cost of PVC pipe and batten is included in this rate.
S&F RCCB EARTH LEAKAGE PROTECTION 230V 25A AC type double pole 30mA ISI marked etc complete all as specified and as directed.
S&F wall mounted extruded aluminium/polycarbonate integrated LED batten fixture with tube 1.2m, 20watt, 1.2 m T5 6500K, effecacy not less than 90 lumen/watt, extruded aluminium /polycarbonate, PC duffusor and inbuilt driver etc complete all as specified and as directed.
S&F angle lamp holder polycarbonate type with back plate etc complete all as specified and as directed.
S&F LED 7W lamp base B-22 etc complete all as specified and as directed.
S&F sub main two single core PVC copper conductor unsheathed wire multi stranded 4.0 sqmm including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 4.0 sqmm copper conductor single core wire connected by commor earth all as specified. incuding 20mm dia PVC conduit, medium grade, ISI marked, etc complete all as specified and as directed. (Note : Two lengths of 4 sqmm and one length 4.0 sqmm earth wire of cable along with 20mm PVC conduit will be measured as one running meter length).
S&F Heavy duty plastic body ventilation fan of 250mm sweep, 240 Volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall etc complete all as specified and as directed.
Supplying, laying, joining and testing of steel water tubing 50 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, socket bends elbows, union nipple etc screwed and socketed joint laid in treanches / under road etc complete all as specified and as directed.
Supplying, laying, joining and testing of steel water tubing 25 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, socket bends elbows, union nipple etc screwed and socketed joint laid in treanches / under road etc complete all as specified and as directed.
Supplying, laying, joining and testing of steel water tubing 20 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, socket bends elbows, union nipple etc screwed and socketed joint laid in treanches / under road etc complete all as specified and as directed. Note for Ser No. 185, 186 & 187 :- The aret of GI fittings is including in this item and nothing shall be paid extra on this account
S&F in replacement Gun metal globe or gate valve size of 50 mm bore pipe, with iron wheel head, screwed both ends for iron pipe conform to IS 778-1984 etc complete all as specified and as directed.
M & L for fixing of ferrule with clamp in existing water supply pipeline or inserting Tee in an existing pipeline including labour charges to do connection for the work complete all as specified and as directed.
Supply and install Monoblock pump sets of cap 3HP, 3 phase, 415 volts complete all alongwith MS clamps, end caps, nut bolts foundation etc for making connection from motor to starter etc complete all as specified and as directed.
Supply and install of electric wire of 6 sqmm suitable for 3 HP monoblock pumpset of etc complete all as specified and as directed.
M & L for cutting existing CI/DI/GI pipe of sizes 100mm /80mm/50mm dia necessary connection with new pipeline including all necessary accessories /fittings required for connection etc complete all as specified and as directed.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
SHARDA ENTERPRIES
KULWANT RAI
RAMA AUTOS
M/s R.K. CONSTRUCTIONS
B D BATRA AND SONS
M/s Vandana Builders
M/s Kamal Builders
RAKESH KUMAR GARG & CO.
M/s Manav Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .