RTWHS/Recharges shaft, And other water harvesting Structures under MJSA 2.0 Block Bamanwas

Construction of tube well after completion of drilling by rotary /percussion method & up to 100 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. 200 mm dia nominal bore. (PWD BSR 2022 Item No.4.3.2 )

Supply of strainer pipes made of ERW M.S.black pipeISI mark of following sizes at the site of work including required size of slotting as per IS :8110-1985. (PWD BSR 2022 Item No.4.6.2 ) 200 mm dia nominal bore

Supply of bore well cover to accommodate 200 mm MS pipe made of MS flat & MS sheet as per drawings (PWD BSR,Chp S-4-4.8.4)

नीव, खाई,परनाला में 1.5 गहराई तक मिट्टी की खुदाई करना , तल को कूटना , पानी डालना, बगल को संवारना , खुदी मिट्टी को बाहर निकालना, नीव भरने के बाद खाली स्‍थानों को पुन: मिट्टी से भरना तथा बची हुई मिटटी को 50 मीटर की दूरी तक निस्‍तारण करना (PS BMS BSR 2025 ITEM NO no.2B) 100*0.60*0.60 mtr-288 cum, (22.0/7)x (1.5+0.23+0.075+0.075)^2)mtr x 1.5 mtr-133.28 cum Above 1.5 mtr and up to 3.0 mtr. (22.0/7)x (1.5+0.23+0.075+0.075)^2)mtr x .5 mtr-44.48cum

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160mm dia (PWD BSR 2022 Chp S-3-3.16.4)

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia (PWD BSR Chp S-3-3.16.3)

Cement concrete well mixed in cement mortar( 1:4:8 ) laid in position complete including curing. Aggregate size up to 20 mm. {GBSR -2025 P.S.BMS, Item No.170 (a)} (22/7)x ((1.5+0.23+0.075+0.075)^2-(1.5-0.075-0.075)^2)mtr x 0.15 mtr

Cement concrete well mixed in cement mortar( 1:3:6 ) laid in position complete including curing. Aggregate size up to 20 mm. {GBSR -2025 P.S.BMS, Item No.170 (b)} (22/7)x ((1.5+0.23+0.075)^2-(1.5-0.075)^2)mtr x 0.15 mtr x 2

नींव तथा कुर्सी प्रथम श्रेणी ईंट की चिनाई सीमेन्‍ट -बजरी 1:6 या 1:8 मसाले में, मय बगल की झिरी बन्‍द करने तथा तराई सहित। सीमेन्‍ट मसाला 1:6 {GBSR -2025 P.S. BMS, Item No.20 (A)} (22/7)x ((1.5+0.23)^2-(1.5)^2)mtr x (3.00-0.15-0.15) mtr

नींव तथा कुर्सी प्रथम श्रेणी ईंट की चिनाई सीमेन्‍ट -बजरी 1:6 या 1:8 मसाले में, मय बगल की झिरी बन्‍द करने तथा तराई सहित। सीमेन्‍ट मसाला 1:6 {GBSR -2025 P.S. BMS, Item No.20 (A)}Chambers 0.45x 0.45 x 0.30 x 15

Cement plaster including smooth finishing in cement mortar ( 1:4 ) 25 mm thick{GBSR -2024 P.S.BMS, Item No.76 (A)} (2*(22/7)*1.5)mtr x (2.45-0.15-0.15) mtr

Centering & Shuttering with plywood or steel sheets including strutting, propping , bracing both ways and removal of form work for foundation in basements rafts, footings, strap beams, bases of columns , etc. upto plinth level. ( {GBSR -2025 P.S. BMS, Item No.93 (b)}) (22/7)*1.5*1.5mtr

सीमेंट कंक्रीट 1:2:4/1:1.5:3 मिश्रण की प्रवलित सीमेंट कंक्रीट में डालना तथा आपूर्ति करना, छत की स्‍लैब, छज्‍जे, बीम, लिंटल आदि में दबाना, तराई करना तथा सतह को 1:3 सीमेंट मसाले से समतल करना आदि समेत पाडबन्दी सहित परन्‍तु स्‍टील तथा शटरिंग की कीमत अलग से। :( GBSR BMS 2024 Item No. 13B) With 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing & fabricating steel reinforcement for R.C.C. work including cutting , bending, placing in position and binding complete including cost of binding wire in foundations, Raft footing step Beams base of columns etc. all complete up o floor three level.( PS GBSR BMS 2025Item No. 61) C33cumx100kg/cum

Supply & lying River-gravels of following sizes in recharge shaft filter pit after screening & washing from kachha shift without deduction of voids. (PWD BSR-4.28.1,.2) Size 9 to 12 mm,(22/7)*1.5*1.5* 0.70 mtr

Supply & lying River-gravels of following sizes in recharge shaft filter pit after screening & washing from kachha shift without deduction of voids. (PWD BSR-4.28.1,.2) Size 3 to 5 mm,(22/7)*1.5*1.5* 0.70 mtr

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Bend 87.5, 110 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Pipe clip 110 mm

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Door Tee 110 mm

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Coupler 110mm

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Reducer 110 mm

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: (PWD BSR 2022 Chp S-3-3.17)Mainhole cover gate

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : ( PS BMS GBSR2025 Item No. 82a)2*20.2714

Board (IronPlate 3*4 Feet with Post,Fixing in CC)

Please Enable Macros to View BoQ information