SPECIAL REPAIRS TO BLDG No. 34 AND 35 (MES COLONY) (OR MD ACCN ) NEAR SHIV MANDIR AT KASAULI CANTT UNDER GE KASAULI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position (Unframed work) complete all as specified.

Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified .

Second class hard-wood, timber fixed and clean sawn, in scantlings fixed in repair complete all as specified.

All as per serial item no 04 above here-in-before ditto but except timber complete all as specified.

Preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified.

Plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sq.cm complete all as specified.

0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275 complete all as specified & as directed.

0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified & as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

GI metal suspended ceiling system OREO GI lay in plain of 600 x 600 x 0.5mm (TEGULAR) Edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm complete all as specified and directed. Note: (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200 mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200 mm long cross tees to be interlocked between main runners at 600 mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600 mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000 x 19 x 19mm, secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasteners of thread size 6.5mm x 25/5 with soffit cleat made of galvanised steel of size 27 x 37 x 25 x 1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified & directed.

20mm thick boarding, hardwood IInd class, planed one side with butt joints, fixed with nails including dismantling old complete all as specified.

Taking down chowkats or frames without taking down shutters, not exc. 1.5 sq. each complete all as specified.

Taking down chowkats or frames without taking down shutters exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified.

IInd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified..

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

35mm thick, 2nd class Hardwood, factory made, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

IInd Class Hardwood 35mm thick factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

30mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads, for securing glass, etc.; sizes of members of shutters as specified ; supplied and fitted to chowkats , windows, ventilators etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) complete all as specified.

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified.

Butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel complete all as specified.

200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified

300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified.

300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed in repair complete all as specified.

Sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified.

75mm thick cement concrete type D-2 1:4:8 using 25 mm graded aggregate , as in sub base of floor complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified.

Rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement complete all as specified.

Rendering 15mm thick in cement plaster 1:4 on rough faces of brick work or concrete surfaces/stone work incl finishing surface without using extra cement complete all as specified.

PCC 1:3:6 Type C2 using 40 mm graded aggregate in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified.

Extra for forming fair finished drain or channel 75 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc,complete all as specified.

Cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

Precast cement concrete Type C1 1:3:6 (20 mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 with joints to match Set in mortar complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Glazed coloured cermaic tiles of Size(300mmx450mm)x7mm thick as on vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified.

Non-Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc complete all as specified.

Coloured prepolished chequered cement concete tiles (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

20mm thick granite slab ( of any type) ( table rubbed and polished ), in platform,urinal portion and the like in CM 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB and counter over 20mm screed bed of CM 1:4 complete all as specified.

40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as floor finished even and smooth using extra cement complete all as specified.

Excavating over areas exc 1.5 m deep or part thereof in depth beyond the first 1.5 m and getting out in Hard/dense soil complete all as specified.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

Cement concrete 1:4:8, as in foundation filling & mass concrete, using 40mm graded coarse aggregate complete all as specified & directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified & directed.

----Ditto---- as per serial item no- 54 here-in-before But except stone complete all as specified & directed.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified & directed.

Brickwork with subclass 'B' bricks,in straight or curved on plan exc 6m mean radius , built in CM (1:6) complete all as specified.

Vitreous China wash basin, white, flat back, size 450x300mm including cutting for and pinning in ends of brackets or erecting stand including15 mm bore fancy pillar tap cast copper alloy with capstan heads chromium plated complete all as specified

75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified

500 Litres rotational moulded polyethylene water storage tanks (triple layered) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed incl dismantling and removing from site complete all as specified

Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore, fixed in repairs complete all as specified.

15mm bore Stop valves cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

15mm bore `Medium grade` GI tubing with all fitting and fixed to walls and ceilings or laid in floors as fixed in repair complete all as specified and directed.

20mm bore `Medium grade` GI tubing with all fitting and fixed to walls and ceilings or laid in floors as fixed in repair complete all as specified and directed.

PVC (SWR) pipe single socketed, in any length with rubber ring joints of 110mm dia complete all as specified.

Mild steel as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 310-0 as fixed in repair complete all as specified.

Two coats of distemper oil emulsion on wall incl preparation of new undecorated surfaces over a coat of 3mm thick white cement based wall care putty on wall complete all as specified & directed.

Two coats of synthetic enamel paint over coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.

Preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. complete all as specified.

Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre n exc 4 kg complete all as specified.

Preparing new steel and iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate demolition) complete all as specified.

Reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel round bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Formwork to soffits of suspended slabs such as lintel, roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified

Preparation of new external surfaces of wall & applying two coats of cement based paint over chalk whiting complete all as specified.

Stainless steel plate rack of size 24"X36"X10" with shelves, hooks and railing to keep plates vertically and horizontly, including necessary fixing arrangement fixed in repair complete all as specified and directed.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes & coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified & directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed in soil and rock complete all as specified.

4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sq. m in each pane fixed in repair complete all as specified and directed.

WC Orissa pattern of size 580x440mm white with integral foot rest including flushing cistern, PVC 10 Ltrs capacity, low level type incl flush pipe etc fixed in repair complete as as specified and directed.

75mm bore cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

Cast Iron cowls 75 mm bore fixed in repair complete all as specified.

75 mm Bends (any radius) for cast iron pipe, diminishing pieces or tapers (larger bore measured) complete all as specified

Prelaminated particle board 19mm thick, Exterior grade prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in wall panelling/cupboard, fixed in repairs, complete all as specified and directed.

Powder coated ornamental type Curtain rod of dia 25 mm including taking out the existing complete all as specified and directed.

Wall to wall brackets for 25 mm rods including taking out the existing complete all as specified & directed

Taking down carefully copper/Aluminium point wiring (light,fan,socket or power) complete,including fittings such as switches, ceiling roses, pendents,regulators,sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

Point wiring using approved colour coding as per IS with unsheathed FRLS copper conductor single core 1.5 sqmm (nominal area) in PVC conduit (ISI marked) including cutting chases in any type of wall and grouting concealed PVC conduit pipe, tee, elbow and bend etc in any type of wall and making good and match with existing surface with all connecting accessories including recess metal wall Box (GI), PVC insulated and unsheated standard copper conductor single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly (switch and sockets to be measured and paid separately) proper colour coding will be maintained complete all as specified for the following.

One light/Fan point controlled by one way switch 5 Amp.

One 3 pin socket outlet 6 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board.

Call bell point.

'-do- all as per item No 96 here in before but for one socket out let 3 pin 15 Amp with 4 sqmm PVC copper conductor and 4.0 sq mm PVC insulated copper conductor as earth continuity conductor.

Switch piano flush type (ISI marked), single pole, one way 6/5 Amp, 240 Volts including taking down old unserviceable one complete all as specified & directed.

Switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including taking down old unserviceable one complete all as specified & directed.

Socket outlet 2/3 pin, 6/5 Amp piano flush type including taking down old unserviceable one complete all as specified & directed.

Socket outlet , 2 in 1, 3 pin 6 / 16 (5/15) Amp, piano flush type including taking down old unserviceable one complete all as specified & directed.

Plug and socket in sheet metal enclosure with two pin and earth plug and socket with and MCB SP 20 Amps 240 Volts heavy duty including taking down old unserviceable one complete all as specified.

Ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals including taking down old unserviceable one complete all as specified & directed.

Sheet metal enclosure with double door for DBs conforms to IS:8623,III. With IP 43 protection 8 way, 240 Volts including taking down old unserviceable one complete all as specified & directed..

MCB single pole having braking capacity 10 KA 6 to 32 Amps 240 volts B curve including taking down old unserviceable one complete all as specified & directed.

MCB SPN having braking capacity 10 KA 35-60 Amps, 240 Volts including taking down old unserviceable one complete all as specified and directed.

LED batten 4 feet long extruded thermoplastic body with PC diffuser in unique square shape of capacity 20W 6500K with PF > 0.95 including taking down old unserviceable one complete all as specified and directed.

Description all as per item No. 107 here-in-before but of capacity 12W 2 feet long complete all as specified and directed.

Energy saving LED light 25 W 6000K 240V, One GI medium grade 40 mm dia bracket of total length 1 m and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling, taking down unsv fitting any type all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6.15mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to gaivanised earth lead wire 4.0 mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrate 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal , with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15 mm bore up to main board complete as shown in electrical plate No 3 MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete as specified and testing on completion complete as specified and directed, Note - The unit rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (light grade) for watering 15mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Wiring for circuit/sub main wiring of size 2 x 6.0sqmm + 1 x 6.0sqmm FRLS PVC insulated copper conductor single core cable concealed PVC conduit including taking down old unserviceable one complete all as specified and directed.

Lamp Holder insulated body with back plate for batten fitting incl dismantling, taking down unsv one all as specified and as directed.

LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V,PF-0.95(min) including taking down old unserviceable one complete all as specified and directed.

LED bulkhead fitting 10 W LED including taking down old unserviceable one complete all as specified and directed.

Bell push, flush type switch 5 Amp including taking down old unserviceable one complete all as specified and directed.

Bell electronic AC 240 volt, 50 Hz including taking down unservicable complete all as specified and directed.

Exhuast fan 300 mm sweep metal body (heavy duty), 1400RPM with air delivery 1050CMH complete and taking down old unserviceable one and depositing the old fan in MES Store all as specified and directed by Engr in charge.

Supply & install, testing & commissioning electrical operated single phase, water storge heater (Geyser) of capacity 25 ltr with ultra diamond glass line coated magnisium rod and 8 bar working pressure (heavy duty) heating element including taking down unserviceable one complete and depositing the old geyser in MES Store.

Sagar Builders

Vinod Kumar Aggarwal

Durga Construction

PRITPAL SINGH