REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION OF CERTAIN OTM AND MD ACCN IN NORTH AREA AT NASIRABAD

Amount

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed by Engr-in-Charge.

Disconnecting of unserviceable sub main wiring of any size including conduit of any type and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed by Engr-in-Charge.

Disconnecting electric connections and taking down old unserviceable MCB DBs of any type including MCBs SPN/SP/TPN of any capacity, complete all as specified and directed by Engr-in-Charge.

Taking down carefully by unscrewing from boards / outlet boxes, light fittings and fixtures such as tube light fittings, bulk head fittings, mirror light, bldg sec light etc for re use at site or carrying to the store ( To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following :-

All as per above item No 5.00 but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 5.00 but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 5.00 but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 5.00 but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 5.00 but One light point controlled by two, 2-way switches complete all as specified and directed by Engr-in-Charge.

All as per above item No 5.00 but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including PVC casing & caping with all PVC casing caping accessories and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-Charge of following :-

All as per above item No 7.00 but One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 7.00 but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 7.00 but One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 7.00 but One 5 Pin 5 Amps socket outlet on independent board with other switch, complete all as specified and directed by Engr-in-Charge.

All as per above item No 7.00 but with 2.5 Sqmm single core multistranded unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed :-

All as per above item No 9.00 but One light point/bell point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per above item No 9.00 but One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch complete all as specified and directed by Engr-in-Charge.

All as per above item No 9.00 but One 5 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed by Engr-in-Charge.

All as per above item No 9.00 but One 5 Pin 5 Amps socket outlet on independent board with other switch complete all as specified and directed by Engr-in-Charge.

All as per above item No 9.00 but One light point controlled by two, 2-way switches complete all as specified and directed by Engr-in-Charge.

All as per above item No 9.00 but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed by Engr-in-Charge.

S & F of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed by Engr-in-Charge.

S & F of switch piano flush type, 5 Amp , 240 volt , single pole, two way switch, complete all as specified and directed by Engr-in-Charge.

S & F of switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed by Engr-in-Charge.

S & F of switch bell push, flush type, 5 Amp, complete all as specified and directed by Engr-in-Charge.

S & F of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed by Engr-in-Charge.

S & F of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all, as specified & directed.

S & F stepped type ( switch type) electronic ceiling fan regulator flush type, AC, 230 volts , complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular switch 2 way 6 Amp, 1 module complete all as specified and directed by Engr-in-Charge.

S&F of modular bell push, 6 Amp, 1 module, complete all as specified and directed by Engr-in-Charge.

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F of modular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed by Engr-in-Charge.

S & F of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed by Engr-in-Charge.

S & F of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed by Engr-in-Charge.

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed by Engr-in-Charge.

S&F in repair LED tube light fitting in acrylic linear tube (1x 20 watt),230V for single LED tube light including 1 x 20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed by Engr-in-Charge. Make:Crompton Cat part No for batten DSGLT8-14, for tube rod TCS-726-20-65-SL-DP-NWH, Havells Cat part No for batten REGALBATTENT8UPTO1X22WSSBSWHNW, for tube rod PHOTONULTRAPLUSN1213T8SSTL20WLED865PCIND, or equivalent in Philips.

S & F wall mounted decorative luminarie fitting suitable for LED lamp B-22 base incl LED lamp 9 watt B-22 base complete all as specified and directed by Engr-in-Charge. Make:- Crompton DCWL15DF, Havells LHFOAJE1TZ1I060

Fixing only serviceable light fitting any type and make obtained from sl item No 4 here-in-before complete all as directed.

S&F in repair LED mirror ligh tfitting,10watt, 590mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.Make:Crompton cat part no.TCS-104-10-65-SL-DP-NWH or equivalent Havells /Philips

S&F in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make: Crompton Cat Part No. TIS-304-10-57-SL-DP-NWH or Havells Cat Part No. HEXAFT10WLED857SSYMBOPC equivalent in Philips

S&F in repair, testing and commissioning energy saving street light luminaire 35/36 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make: Crompton Cat Part No TRP-400-35-57-SL-LM-NSR, Havells Cat Part No ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD or equivalent in Philips.

S&F LED 2 way ligh tfitting,6 watt, in cool day/warm white IP 65 Aluminium Die cast complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make:Wipro cat part no. WIPRO GARNET 6W 1X2 WAY WALL LIGHT (DW40627) or equivalent Crompton /Philips

S & F in repair recess mounted LED 12 watt Slim edge lit panel minimum lumen output 120 lumens/Watt, total system lumens 1440, compact, aluminum die cast housing, round fixture with opal diffuser and separate electronic driver complete all as specified and directed by Engr-in-Charge. Make Crompton Cat No LSCRM-12W-CDL, Havells Cat Part No INTEGRANEODLR12WLED857S or equivalent in Philips.

S&F in repair surface mounted LED downlight 15 watt round shaped , Slim surface mounted LED panel with Al.die cast body with minimum system lumen efficacy >100 lumen/watt & total system lumens >1500 with premium diffuser to ensure glare free & even light distribution complete all as specified and directed by Engr-in-Charge. Make: Crompton Cat No. LCDSPLN-R-15-CDL, Havells Cat Part No INTEGRANEOSURFACEDLS15WLED830S or equivalent in Philips.

S & F in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, lumen efficacy >100 Lm/w complete all as specified and directed by Engr-in-Charge. Make Crompton cat part no. TCR-145-36-65-SL-NWH, Havells Cat Part No PLANO2X2PLR36WLED857TAPSUGR19or equivalent Philips.

S & F in repair high efficiency round highbay with circular form factor and available in both Narrow & wide beam optics of IP lens/PC cover and luminaire in pressure die cast housing for industrial application 150 watt, system lumen efficacy >150 Lm/W Total System lumens 22500, 5700K IP66 protection including LED Potted driver complete all as specified and directed by Engr-in-Charge. Make Crompton cat part no. CIP-326-150-57-60D-HL5-LM-NSG or equivalent in Havells, Philips.

S & F in repair street light bracket made of as per light fitting required GI pipe fixed with two nos of clamp , nut and bolts complete all as specified and directed by Engr-in-Charge.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed by Engr-in-Charge. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable complete all as specified and directed by Engr-in-Charge. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge.

S & F of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed by Engr-in-Charge.

S & F of MCB SPN 63 Amp capacity, 10 KA , 'C' curve complete all as specified and directed by Engr-in-Charge.

S & F of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed by Engr-in-Charge.

S & F of MCB TPN 100 Amp capacity, 415 volt, complete all as specified and directed by Engr-in-Charge.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed by Engr-in-Charge. Note : MCB DB and MCB will be of same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 12 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed by Engr-in-Charge. Note : MCB DB and MCB will be of same make.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed by Engr-in-Charge. Note : MCB DB and MCB will be of same make.

S&F of MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed by Engr-in-Charge. Note: MCB DB and MCB SP/SPN will be of same make.

M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed by Engr-in-Charge. Note :- The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level.

S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed by Engr-in-Charge.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed by Engr-in-Charge. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M/s Shiv Builder and Suppliers

ENGINEER CORPORATION OF INDIA

PD GUPTA AND COMPANY

VIPRABANDHU CONSTRUCTIONS

AIRCOM

KAVYA ENTERPRISES