Special repair to Bldg No P 07 at Prem Vihar and execution of certain other sanctioned works at Dhar Road under GE Army Dhar Road Udhampur

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specifications & drawing and as directed by Engineer-in-Charge

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rials with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing as directed by Engineer-in-Charge.

S&F pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in cement mortar 1:6 complete all as specified and directed.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in cement mortar 1:6 complete all as specified and directed.

S&F aluminium anodised 100 mm long butt hinges type B-21 with galvanised mild steel screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F aluminium anodised handles, cast type anodised 100 mm long complete all as specified and directed.

S&F aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed.

S&F for pressed steel frames of size 75 X 60 mm for cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the wall with plaster in cement mortar 1:6 complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed.

S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete, all as specified and directed by Engr-in-Charge.

S&F factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I section 8.20 (a), all as specified and directed by Engr-in-Charge

Supply, fabrication and fixing of kitchen cabinet back side, partition and shelves made out of 18 mm thick PVC board plain fitted with necessary arrangement complete all as specified and as directed by Engr-in-Charge.

M&L for providing kitchen cabinet with shutters in required size at site made out of 18 mm thick PVC board one side laminated and other side plain fitted to wall. The panels shall be fabricated using adhesive, screwed and secure as required. All edges shall be covered with 1.5mm thick edges leaping tapes or 90 degree edge bent finish as per manufactures instructions complete all as specifed and directed.

S&F factory made solid PVC moulded particle board core door/cupboard shutters 28 to 30 mm thick (stiles) designed with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specifed and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc complete all as specifed and directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specifed and directed.

S&F butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specifed and directed.

S&F 300 mm long aluminuim alloy, anodised , sliding bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specifed and directed.

S&F 200 mm long aluminium , anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed.

S&F aluminium handle 125mm long, cast type complete all as specifed and directed.

S&F continuous (piano) hinges 30mm width of flap, mild steel bright finish or electrogalvanised of complete all as specifed and directed.

S&F 150mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specifed and directed.

S&F steel windows made up of box steel section of 16 gauge MS sheet tube outer frame, shutter frame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shown in drg consisting with two Nos pintol hinges 100 mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, dovetailed are welded in each panel complete with necessary cleats and stopers all as specified and directed.

S&F steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly glazed partly gauged and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper complete all as specified and directed (MS Gaurd bar/grill work will be measured and paid separately.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing con- forming to Fe.410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in squares n exc 0.50 sqm in each panes fixed to steel, metal frames complete all as specified and directed.

All as per item No 31 above but pin head type, figured glass.

M&L one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint over old painted wood and wood based surfaces of any description, not exc 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coasts of synthetic enamel paint complete all as specified and directed.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weight not less than 3.6 kg/ sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/sqm), (e) M&L for PCC 1:7:12 for filling of sunken portion after concealing all menbrane and sealing all joints with broken bats and light weight to the entire satisfaction of Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of cement concrete in any position n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified and directed.

M&L non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm. in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 15mm thick bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm. in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 15mm thick bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in vertical surfaces such as terrazo, dado and skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site and rubbish off the premises etc complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surfaces such as terrazo, dado and skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F glazed ceramic coloured tiles 300x300x6to7mm thick in vertical surfaces such as terrazo, dado and skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed.

S&F in repair 15 mm bore chromium plated angular stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F chromium plated towel ring fixed with screws etc complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed.

S&F brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for wash hand basin complete all as specified and directed.

S&F wall mixture non telephonic shower arrangement with connecting legs & wall flange complete all as specified and directed.

S&F for sink mixture with regular swining spout wall mounted with connecting legs & wall flanges complete all as specified and directed.

S&F stainless steel plate racks of size 750mm x 900 x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl 40mm waste fitting overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed.

S&F for mirror cabinet PTMT of 450mm x 600 mm with magnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs complete all as specified and directed. Make : Prayag or equivalent.

M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade galvanised with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

Refixing 15 mm dia ,old steel tubuing and connections in new or old position (wall,ceiling and floors etc) complete all as specified and directed.

Refixing 20 mm dia ,old steel tubuing and connections in new or old position (wall,ceiling and floors etc) complete all as specified and directed.

S&F GI tubing 25 mm bore medium grade galvanised with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories)

S&F PVC (SWR) floor trap including jointing with solvent cement, 100 mm diameter of outlet, complete all as specified and directed.

S&F PVC (SWR) floor trap including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

Dismantling of cast iron or PVC pipes including all fittings and accessories, 100/75 mm dia and in any position complete all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete complete all as specified and directed.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

S&F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make

S&F corner glass shelf etc complete all as specified and directed by Engineer -in-charge

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded aggregates as in coping/benching etc complete all as specified and directed.

M&L for reinforced cement concrete type B1 1:2:4 (12.50 mm graged aggregate) as in chajjas complete all as specified and directed.

Demolition of brick work of any type built in cement mortar in foul condition etc complete all as specified

M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed.

M&L for brick work built in cement and sand mortar 1:4 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded agg) 75mm thick as in sub base complete all as specified and directed.

Demolition of RCC of any descrition such as kitchen chimney, chajja, shelves, OH Tanks. etc and in any position not other wise specifically provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings,balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for grouting 25mm thick under stanction bases or grillages, etc incl any temporary shuttering to edges with cement mortar 1:2 complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Dismantling water tank and remove to Store of capacity exc 250 but not exc 500

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed.

Removal of vegetations from roots etc on wall/Roof area n.exc 1.00 sqm each by applying suitable chemical and making good the surface by grouting the holes and matching the plastered surfaces 15 mm thick in cement mortar (1:3) complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scraping, sand papering or by using mechanical sander and preparing plastered surfaces and applying two coats of oil emulsion distemper of approved tint on walls by using roller/spray complete all as specified and as directed by Engr-in-Charge.

M&L for preparing new plastered surfaces applying two coats of OBD/on new plastered surface over a coat of alkali resistant primer of any description of approved tint over new plastered surface complete all as specified and directed.

M&L applying three coat of white wash on prepared surfaces of new plastered surface of wall etc complete all as specified and directed.

M&L for applying three coat of white wash on newly plastered surface of ceiling etc complete all as specified and directed.

M&L for complete removal of existing surfaces of ceiling and applying two coat of white wash on old plasterd ceiling surfaces etc complete all as specified and directed.

M&L for two coat of exterior emulsion paint (Weather Coat) over one coat of acylic primer on any type of wall, roof boarder, drops, fins, chajja / roof facia, column etc, including preparation of new surfaces complete all as specified and directed.

M&L for preperation of new surface and applying three coats of white washing on old wall surfaces of approved tint over new plastered surface, complete all as specified and directed.

S&F in repair Eye door viewer (magic eye) of size 10" fixed in position for door shutters complete all as specified and directed.

Taking down old PCC tiles form roof and removing bedding at any position all as specified and directed

Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm all as specified as directed.

Applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and leaning of the surface thereafter complete all as specified and directed.

M&L cement concret tiles with grey cement and no pigment 25cmX25cm x22mm thick machine pressed set and jointed over and including 15mm screed bedding in cement mortar 1:4 and pointed in neat cement slurry in flooring complete all as specified and directed.

All as per srl item No 117 above but except tiles

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge .

M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.

Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified (Make of polymeric water proofing membrane : M/s IWL India Ltd/M/s STP Texas Ltd/Bengal Bitumen).

Supply only liquid water proofing compound

Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc. or for shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plain and n.exc 1.5m depth and getting out

M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm all as specified and as directed.

Removing surpluses soil to a distance n.exc 50m and deposited at a level n.exc 1.50m above the starting point all as specified and as directed.

Hardcore of broken stone are boulders of gauge n.exe. 63 mm deposited, spread and leveled in layers n.exc. 15 cm thick , watered and rammed to a true surface.

M&L for 40 mm thick PCC type B1 1:2:4 ( 20mm graded stone agg) as in of floor complete all as specified and directed.

M&L steel TMT bars10mm dia & over cut to length bent to shape reqd incl cranking, bending spirally for hooping the columns, hooking ends and binding with and incl mild steel wire (anneled) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.131 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spaces and binders.

S&F PGI sheet 22 gauge as in flue pipes of 250mm dia made in shape complete all as specified and directed.

S&F cowls (with 3 stays), riveted to & including 15 cm length of flue pipes complete all as specified and directed.

M&L precast cement concrete in cement mortar (1:4) type B1 1:2:4 (20mm graded agg) window or door cills, lintel,bressumers, steps,quoin blocks (for use with masonry) string courses,coping,kneelers, apex stones,pier caps, columns,posts,boundary pillars,bed plates,pintle blocks anchorage blocks,bounders (for stone walling ,corbels, brackets,etc. (of any section indecated ) ,with plain fair faces,including chamfers weatherings, throating etc. and setting in mortar complete with joints to macth.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for wire netting of 25mm size galvanised steel wire 1.40mm dia fixed with tinned tacks or wire staples

M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

Taking down old unserviceable/deterioated batten /PVC conduit point wiring aluminium/copper from existing place i.e light, fan ,soclet or power points complete with all unserviceable fittings such as switches, sockets, bell push, celling rose, pendants, holders etc and making good all disturbed surfaces to wall, floor etc by means of cement mortar (1:3) or plaster of paris and to match / finish new surfaces as the existing surface either by using same colour distemper , putti or white / colour wash all as required and directed by engineer-in-charge.

M&L for concealed Point wiring for Power point contolled by one 6 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl rigid medium grade not less thatn 20 mm dia PVC conduit (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.2mm thick MS sheet duly painted with aluminium paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

One light / Fan / Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 6 Amps on the same board with other switches

One 3 pin 6 Amp socket out let controlled by one switch on independent board

Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl rigid medium garde not less than 20 mm PVC conduit (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.2 mm thick MS sheet duly painted with aluminium paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed. Make of wire : Finolex/Havells/Polycab.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Material & labour for lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

S&F wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver includingdismantling unsv FTL fitting T8 type any type complete all as specified and directed. Make: Crompton cat part No DMLN1LT8-16 LT5RT-18-CDL / Bajaj Cat Part no BLRB-DB 118 & BLRB 18W CWc XE or equivalent in Phillips /OSRAM

S&F LED building security light 35 watt,230V complete with all accessories and including connecting up to celling rose with 0.5 sqmm three core copper flexible conductor cable, one GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener inc dismantaling taking down unsv fitting any type all as specified and directed. Make- Wipro Cat Part No LR02-391xxx-57-xx or equivalent in CG/Phillips.

S&F medium step type fan regulator , 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed. Make Cona / Anchor/Havells/Crabtree

S&F LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) incl . Make-Havells/CG/Bajaj/ Philips

Supply and fixing MCB, single pole 'C' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed. Make : Legrand/Schneider/Havells

Supply & Fixing MCB SPN having braking capacity 10 KA 35-60 Amp, 240 Volt 'C' Curve complete all as specified and directed. Make : Legrand/Schneider/Havells

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt . Make : Legrand/Schneider/Havells

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

S&F in replacement of sheet metal enclosure for MCB DB 230 volts SPN 4 way double door of protection grade IP 43 in fine powder quoted matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type Copper bus bar din rail, earth bar of 4 way conforming to IS 13032 and 8623 complete all as specified and directed CAT No Schneider electric/Legrand/L&T.

S&F MCB TPN 63 Amp, 240 Volts AC 10 KA breaking capacity "C" series.

Supply and laying or fixing or pasing through pipe testing and commissioning of 1100 volts grade "Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 25 Sqmm nominal cross sectional area 3.5 Core confirming to IS specification. Make : Havells / Grandlay/Finolex

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete all as specified and directed .Note - The units rate includes the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc.

S&F GI pipe light grade 40mm bore for covering to cable along the pole/across road crossing/under culvert and passing through walls complete all as specified and as directed.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering & well ramming in layers not execeeding 25 cm thick complete all as specified and as directed.

Removing excavated soil/demolished material not exceeding 50 Mtrs from the starting point all as directed.

M&L for dry sand for cushioning for laying cable in trenches all as directed by Engineer-in-Charge . Note:-Punned thickness shall be considered for measurment purpose

Supply and fixing Ceiling fan 230 Volts complete and accessories with 1200mm sweep and assembling the same at site complete including supplying and fixing PVC insulated twisted 3 core 23/0.0076 copper conductor flexible PVC insulated wire of required length from connector to fan painting MES Number with Black Bold letters with synthetic enamel paint upto 2.50 cm high complete all as specified and directed by Engineer-in-Charge.

S&L bricks burnt for protection of cable Sub class 'B' bricks laid dry flat across the cable with length of whole brick complete.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven, single phase having approx storage capacity 80 Ltr and nominal cooling capacity 40 ltrs/hrs including connection with PVC pipe two brass end connectors including drain pipe of suitable size and also connecting with existing drain incl bib tap complete all as specified and directed. Make Blue Star/ Samsung/LG/Voltas

Supply and fixing RO+ UV institutional water purifier of capacity 50 LPH with duty cycle of 8 hrs max complete including connection and testing Make Kent or its equivalent

S&F Stabilizer 2 KVA 230 volts AC upto 130-280 volts complete all as specified & directed Make Blue Bird/ V Guard/ Volts Amp.

M&L for switch socket combination 2 in 1,3 pin 5 & 15 Amps flush type universal

M&L for switch socket combination outlet 3 pi 6 Amps flush type

S&F 15 mm dia stop valve chromium plated all as specified and directed.

Supply, Installation, Testing and commissioning of Solar Water heating system (Tubulor rod collector) based on direct transfering of heat thermosyphon cirulation, non pressurised system of capacity 100 LPD with suitable electric backup including accessories as per manufacture design and recommendation complete all as specified and as directed by Engineer-in-charge. Note : Rate of solar system includes the cost of electric backup, stainless steel hot water tank with puf insulation and alluminium cladding 22 SWG, MS Stand for mounting plan/roof, guages, meters and protection device complete including necessary arrangement but does not include the cost of cold water tank, cold water piping and hot water piping complete all as specified & directed. Make Havells/Intersolar.

Supply, laying, connecting, testing and commisioning XLPE insulated (armoured), screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm 2 core laid in trenches/on pole/induct/under road crossing complete all as specifed and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB 20Amp including necessary fabrication work for fixing on MS stand/wall complete all as specified and directed.

S&F GI tubing medium grade 25mm bore with all fittings including connecting and fixed on floor/wall complete all as specifed and directed.

S&F GI tubing medium grade 20mm bore with all fittings duly insulated with glass wool 25mm thick of density 144kg/cum conforming to IS-9842, including lagging to pipe all around and providing aluminium cladding, thickness not less than 28 SWG on the pipe section including connecting and fixed on floor/wall complete all as specifed and directed.

S&F Gun-metal, globe or gate valves, heavy duty with iron wheel head, screwed both end for iron pipe and fixed for 25mm bore complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, three layered , ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including GI inlet, out let, over flow and wash out complete all as specified and directed.

S&F 4 mm dia GI sheet wire, 150 x 100 mm mesh made up into mattresses or cases capped wired and laid in position incl angle iron frame with hinges incl all size covered all as specified and directed.

S&F bib tap cast copper alloys chromium plated with crutch or batterfly handle, screwed down, screwed for iron pipe 15 mm bore.

MAHADEV ENTERPRISES

NARESH KUMAR KHAJURIA