Routine Maintenance of Public Health Services water supply and sanitation at Deluxe and Additional Deluxe Building and Central Club, Sector 9, Chandigarh.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) .4.1.3

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1

Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. .10.25

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works .10.25.2

12 mm cement plaster finished with a floating coat of neat cement of mix : .13.7

1:4 (1 cement: 4 fine sand) .13.7.2

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3

W.C. pan with ISI marked white solid plastic seat and lid .17.3.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. .17.7.2

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: .17.1

Kitchen sink without drain board .17.10.2

610x460 mm bowl depth 200 mm .17.10.2.2

Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13

Orissa pattern W.C. pan of size 580x440 mm .17.13.2

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. .17.15

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. Of quality and make as approved by Engineer - in - charge. .17.16A

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. .17.19

10 litre (full flush) capacity-white .17.19.1

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : .17.20

White solid plastic seat with lid .17.20.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28

Semi Rigid pipe .17.28.1

32 mm dia .17.28.1.1

40 mm dia .17.28.1.2

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. .17.31

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall .18.10

15 mm dia nominal bore .18.10.1

20 mm dia nominal bore .18.10.2

50 mm dia nominal bore .18.10.6

Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21

45 cm length .18.21.2

15 mm nominal bore .18.21.2.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 .18.49

15 mm nominal bore .18.49.1

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. .18.50

15 mm nominal bore .18.50.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53

15 mm diameter bore .18.53.1

Providing and fixing PTMT bib cock of approved quality and colour. .18.54

15mm nominal bore, 86 mm long, weighing not less than 88 gms .18.54.1

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. .18.62

15 mm nominal bore, 105 mm long, weighing not less than 138 gms .18.62.1

20 mm nominal bore, 120 mm long, weighing not less than 198 gms .18.62.2

25 mm nominal bore, 152mm long, weighing not less than 440 gms .18.62.3

Providng and fixing PTMT angle stop cock 15 mm nominal bore weighing not less than 85 gms .18.63

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality .19.19

Circular shape 500 mm internal diameter .19.19.2.2

Circular shape 560 mm internal diameter .19.19.3.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards .NSR

15 mm nominal bore .

Providing and fixing 5mm thick looking glass with PVC/ wooden beeding and with thick hard board on the back fixed with wooden cleats with screws and washers complete in all respects to the entire satisfaction of EIC. Make of glass Modi/ Saint Govin/ Atul .NSR

Providing and fixing of EWC wall hung constellation EWC alongwith twin flushing fitting complete in all respect size 655x365x745 mm as per CAT No. S1031134 Cera snow white) .NSR

Providing and fixing of precast RCC Road gully Cover & frame (27" x 22") fixed in CC 1:2:4 Complete in all respect .NSR

Providing and fixing of precast RCC Road gully Cover & frame (12"x25") fixed in CC 1:2:4 Complete in all respect .NSR

Providng and fixing of soap dispensor push button capacity 0.8 L, material ABS finish white/ smoked complete in all respect Jaquar Model J0010F or of equivalent make Cera/ Hindware .NSR

Providing and fixing C.P. Bib Cock complete in all respect Make jaquar Model CON-037KN Continetal or equivalent make Cera/ Hindware .NSR

Provinding and fixing 32 mm i/d CP brass bottle trap for wash basin and sink complete in all respect and to the entire satisfaction of EIC of make Jaquar Cera, Essco, Viking or equivalent .NSR

Providing and fixing of pressmatic automatic pillar tap for wash hand basin complete as per site requirement. Make:Jaguar PRS-031 or of equivalent make Cera/ Hindware .NSR

Providing and fixing C.P. single towel rail 600mm long of jaquar continetal make ACN-1111SM .or of equivalent make Cera/ Hindware .NSR

Providing and fixing CP Towel ring 600 mm Jaquar model ACN 1121N Continental complete in all respect. .NSR

Providing and fixing Providing and fixing white vitreous china flat back half stall urinal mm Cat. No. S4020112* complete in all respect (Size CAPRIANA 375 x 390 x 590) Make Cera or equivalent in the same range of AOR. .NSR

Providing and fixing of chinaware urinal Partition. (Snow White). New Cat. No.S4090101, Make Cera or equivalent in the same range of AOR. Size: 90x320x720 mm .NSR

Providing and fixing of frost glass urinal partition of jaquar make of size 900x 450x 8 mm complete as per site. .NSR

Providing and fixing C.P. Long body bib cock make jaquar( continental) CON-107KN complete in all respect. or of equivalent make Cera/ Hindware .NSR

Providing and fixing C.P. hand shower (health faucet) with 1 meter long easy flex tube in chrome finish & wall hgook complete in all respect Make Jaquar series ALD -573 complete in all respect .NSR

Provbiding and fixing C.P. grating 4" dia flanged type over existing floor traps with the help of white cement complete in all respect to the entire satisfaction of Engineer in charge .NSR

Providing fixing PTMT cistern handle with lever complete in all respect to the entire satisfaction of EIC .NSR

Providing fixing of PVC ball cock for low level cistern complete in all respect to the entire satisfaction of EIC. .NSR

Providing and fixing PVC low level cistern fittings complete in all respect to the entire satisfaction of Engineer in Charge .NSR

Providing and fixing of China Ware Oval shape Counter Wash Basin including cost of C.P. Waste 1 1/4" complete in all respect. (Snow White). Cat.No. S2030104, Make Cera, or equivalent in the same range of AOR. (Size: 560x470x190 mm) .NSR

Providing and Fixing of PVC Rigid drain Pipe complete in all respects from indoor unit to Disposal Points as directed by the E.I.C. Size ¾” including specials Diplast Or Equalivent. .NSR

Providing and fixing of PVC Tank Cover with clamp complete of following capacity .NSR

500/1000 Litrs. .

5000 Litrs. .

Providing and fixing of Toilet Roll Holder with Stainless Steel Flap make Jaquar model no.ACN-1153S or equivalent model of make: Cera/ Hindware complete in all respect to the entire satisfation of engineer in charge. .NSR

Please Enable Macros to View BoQ information