Special Repair to Bldg No T-58 (Jco Ors Patient Guest Room) near MH Gaya (OLD CAMP) and Special repair to Bldg No T-107 (MES Furniture Yard) at Mil Stn Gaya

Amount

S & F Prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete.

Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc Fe 410 W (Gde E - 250 quality).

M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement.

M&L hard core of gauge 63mm but n.exc 100mm deposited spread and levelled in layers not exc 15cm thick watered and rolled/rammed to a true surface of broken stone or boulders

Sand filling under floors are in foundation including watering and consolidation

M&L for Providing precast cement concrete louvres and jallies 35 mm thick Type B0 1:2;4(12.5 graded agg)Set in cement mortar 1:6 all as specified and directed by Engr-in-charge.

M & L for 18- 20 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L PCC 1:2:4 Type B1 (20mm graded agg) as in copings,kerbs and like incl weathering slightly rounded or chamfered angles and throating as directed

S&F of stainless steel grade 304 of kitchen plate rack of 900x750 mm complete all as specified and directed.(make-nirali/prayag)

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) vent cowl for 110 mm bore pipe

S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M & L for rendering 15mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete.

M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly

Supply only liquid water proofing compound (Make : Sika Latex Power)

M & L for 1 mm thick of Birla white putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings.

M & L for preparation of old plastered surfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed.

M&L one coat of exterior weather coat paint white or tinted on walls as per manufacturer instruction or fascia of roof or chajjas on old/new decorated prepared plastered/painted surfaces of bldg all as specified & directed. Make :-Asian Paints (Apex)/ Berger paint (Brand -Walmasta)/Nerolac paint (Suraksha plus)

M & L for preparation of new/old plastered surfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed.

Dismentling Stone slabs and tiles of any description or thickness in floors & pointed in any Mortar all as specified and directed.

M & L for double charged vitrified tiles light shed (square/ rectangular), area of each tiles not less than 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:4 complete.

M & L for coloured Glazed ceramic tiles in vertical surface 450x300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.

M&L for non skid colourerd ceramic tiles coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spfd

M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls built in CM (1:6) all as spfd.

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed by Engr-in-charge.

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.

M & L two coats of synthetic enamel painting on wooden surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new/old wooden surfaces.

S & F as in repair aluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia.

Ditto all as per item no 46 above but 6 and over in stirrups, spacers and binders complete.

M & L for RCC Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M & L for 32 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc.

M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

M & L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

S&F as in repair 150mm long aluminium anodised barrel tower bolt complete.

S&F as in repair stainless steel Butt hinges, medium weight cold rolled of size 100 mm .

M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.

S&F in repair galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engg- in- charge.

S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon

S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified

M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165

Dismantling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed

M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

M & L for 18 mm thick Pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber framework with teak wood beading as in linings, panelling wsimilar location complete all as specified and directed.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S&F magnets to be used in cabinets as specified and directed by engineer in charge

S & F of stainless steel fancy type handle 100 mm long complete.

Supply & Fixing heavy duty telescopic sliding channel suitable for 18/19 mm thick prelaminated paarticle board/ply board fixed at site as per directed.

S & F sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm all as specified and as directed. Make - Prayag/Polytuff/Symet

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)

S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make-a Prayag/ Jaguar)

S&F brass chromium plated Shelf glass/Corner self/towel ring assembly with CP screws etc complete all as spd (Make-Prayag)

S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. Make : Prayag

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed.

M & L Plain cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in foundation filling and mass concrete complete.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

M&L brick work with old size flyash brick sub class 'B' laid straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L rendering 15mm thick in CM1:4 on faces of brick work or concrete surfaces and finished even & smooth all as specified and directed.

M&L for 2 coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigments all as specified and directed

M&L Plain cement concerete type D-2 1:4:8 (40mm graded agg) as in foundation, filling and mass concrete complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc., removing materials to store, or keeping in safe custody for re-use at site or offering credit, and making good disturbed surfaces of walls, floors, etc. all as specified and as directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully service wire of any size from existing of any height materials at site etc complete all as specified and directed.

Taking down exhaust fan/ cfiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one way switch.

(b) One Exhaust fan/Ceiling fan point controlled by one way switch.

(c) One 3 pin switch socket outlet 5A on independent board.

(d) One 3 pin socket outlet 5A on same board with other switch

Dito- as item no 5 above but One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S &F switch socket combination 2-in-1, 3 pin, 6 and 15 amp flush type universal.

S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

M & L for Switch Socket combination 2-in-1, 5 pin, 5 Amps flush type.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Lamp holder, PVC/Polycarbonatetype with back plate suitable for batten fittings all as specified and directed.

S & F for wall mounted LED tube light fitting, 4 x feet 18/20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

Supply and fix MCB single pole and neutral, 240 volts, 32-63 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 2 core heavy duty nominal cross section in service connections

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

S&F 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, B class insulation comprising of electronic fan regulator, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding fan motor having power factor not less than 0.9, minimum service value 3.5 CMM/W, Air delivery minimum 245 CMM as per IS-374:1979 (amended upto Mar 2002) including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC supply complete all as specified and directed. Make: Havells/Usha/Khaitan/ Crompton

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

S&F for exhaust fan heavy duty single phase 300 mm sweep, 1400 RPM, 240 Volts, AC with and including louvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site.

M/S MAGADH CONSULTANT

MS HARI MOHAN GUPTA

SINGHAL ENTERPRISES