C O Ayurvedic Health Centre at Katiyara Tehsil and Distt Solan

Amount

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with in all lead and lift as per Technical Specification Clause 1603.1 ( one six zero three point one) and MORD specification including carriage of all labour equipment and materials to various location of site through all modes of transportations in all lead, lift and all incidental charges. all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erossions, damage to hill side, water pollutions etc. and to protect stability of hill side rock work shall be executed with chiseling, wedging out rock, where blasting is prohibited).All earth work in excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevations and leyels as shown on the drawing or as directed by the Engineer-in-Charge. Stacking of materials useful for construction at suitable site and safe disposal of unserviceable cut material in specified manners, trimming, filling of unevenness blindages and finishing of the road to specified dimensions as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other cases, it shall be removed by the suitable diversion, bailing out or dewatering as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Earthwork in excavation for structures as per drawing and technical specification for Construction of hill side drain in accordance with the requirement of specifications true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 1606.1(One six zero six point one) as per direction of Engineer in Charge and as per MORD specification including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges. all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosions, damage to hill side, water pollutions etc., and to protect stability of hill side rock shall be executed with chiseling wedging out rock, (where blasting is prohibited). Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable cut materials in specified manners, trimming, filling of unevenness blindages and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials for disposing at dumping sites (to be arranged by the contractor) through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by mechanized means and labour (if required) .All usefull materials, such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used and removed as per the direction of Engineer-in charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Filling in plinth with course sand under floor including, watering, rammimg, consolidating and dressing complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimetres,so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Flat surfaces such as soffits of suspended floor, roofs, landings and the like floors etc. upto 200mm in thicknss.

Beams, cantilevers, girders and lintels. Sides and soffits of beams, beam hunching cantilevers, bressumers and lintels in all depths and in all heights from floor.

Beams, cantilever, girders and lintels.

Edges of slabs and breaks in floors and walls under 20 (Twenty) centimeters wide.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm (twenty five milimeters)nominal size and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 40mm (Forty milimeters)nominal size and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 12.5mm nominal size) and curing complete. including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Applying a coat of hot bitumen mexphault 80/100 (eighty /One hundred) or equialvenet using 1.70 (One point seven ziro) per sqm. On damp proof course after cleaning the surface with a pice of cloth lightly soaked with kerosene oil as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying cement concrete 1 :1.5 :3 [ One cement isto One and half sand isto Three graded hard stone aggregate 20 (Twenty) millimeters nominal size] conforming to grade M-25 (M-Twenty Five) mechanically mixed and vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work, as per H.P. PWD. specification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:

Suspended Floors, roofs and landing, shelves and their support in all floors up to all heights and levels.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing in all floors up to all heights and levels.

Providing and laying cement concrete 1 :1.5 :3 [ One cement isto One and half sand isto Three graded hard stone aggregate 20 (Twenty) millimeters nominal size] conforming to grade M-25 (M-Twenty Five) mechanically mixed and vibrated and curing complete, excluding cost of form work and reinforcement for reinforced concrete work, as per H.P. PWD. specification 1990 volume - I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:

Providing mild/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete as per structural drawing in all floors up to all heights and levels, as per direction of Engineer-in-Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Second class brick work using common burnt clay building bricks in super structure above plinth level in cement mortar 1:6 (One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Half brick work using common burnt clay Second class building bricks above plinth level in all floors up to all heights and levels in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in including carriage of all labour equipments and Cement Mortar 1:6 (1 cement : 6 sand) materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Squared rubble masonry coursed with hard stone of approved quality in superstructures including raking out joints in Cement Mortar 1:6 (one cement isto six sand) as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

6mm Cement plaster to ceiling In Cement Mortar 1:4(1Cement:4 Sand) as directed by Engineer-in- Charge, as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

15mm Cement plaster Cement Mortar 1:4 (1Cement:4 Sand). in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

20mm Cement plaster in two coats,backing coat 15mm and finishing coat 5mm thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

Stone filling dry hand packed tightly in foundation & plinth as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing 40mm thick 2nd class deodar wood paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing wire gauge shutters using galvanized mild steel wire gauge of I.S. gauge designation 85 G (Eighty Five G) with wire of dia 0.56 (Zero point Five Six) millimeters for door, windows and clear story windows including bright finished black enameled iron hinges with necessary screws 40mm (forty millimeter) thick second class deodar wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing M.S. Plain grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

P/F partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately.Particle board (cement bonded partical board) 8mm (eight millimeter) thick as per H.P.PWD. Specification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing first class deodar wood 75 mm x 60mm rounded hand rails in straight length complete in including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter.). anodized aluminum sliding door bolt transparent or dyed to required shade and color with bolts and nuts screws etc. complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental.

Providing and fixing alluminium Tower bolts (barrel type) anodized transparent or dyed to required shade and color with screws etc. Complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing alluminium handles anodized transparent or dyed to required shade and color with screws etc. Complete as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 150 (One Hundred Fifty ) millimeters size oxidized M.S. hooks and eyes complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 12mm (twelve millimeter) thick prelaminated board both side Bwp phenol bonded exterior/interior grade paneled shutters with 40mm (forty millimeter) thick frame of Ist class deodar wood for doors, including bright finished/black enameled iron but hinges with necessary screws as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 10mm (ten milimeters) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred into six hundred into ten milimeters) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve milimeters) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required completeincluding carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per the direction of Engineer-in Charge including carriage of materials with in all leads, lifts and other incidental charges.

Providing and fixing 0.60mm(zero point sixty milimeter) thickness prepainted steel sheet roofing over steel members/trusses, prepainted galvanised steel of TATA Durashine hot dip metalic zinc coated sheet with the top coat of regular modified polyster (RMP)organic coating of 20(twenty)micron over 5(five) micron runner plus back coat of polyster of micron over 5(fi e) microns primer coating (having 1060 mm(one thousand sixty milimeter) covered with over all width 1126mm(one thousand one hundred twenty six milimeter) as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete 100mm (Hundred millimeter) dia pipes as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm (Ten into Ten into Ten centimeter) of 1:2:4:mix (one cement isto Two sand isto four graded hard crushed stone graded stone aggregate 20 mm (Twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall face C.I. 100mm dia accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement :2 sand) complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

100mm diameter

Providing and fixing 15cm (fifteen centimeter) wide 45cm (forty five centimeter) over all semicircular plain G.I. sheet gutter using 0.63mm (zero point sixty three milimeter) thick sheet with iron brackets 40x3mm(forty into three milimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design:in all heights and all floor level as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing MS BP sheet 2mm (two millimeter) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer completre as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete in all respect as per structural design, drawing, direction of the Engineer in Charge and as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD.specification 1990 volume-I, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Applying priming coat with ready mixed paint brushing with primer pink over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting as per HPPWD specification 1990 ( one thousand nine hundred ninety ) volume-1 including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.

Painting two coats with enamel paint other than white (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Applying Birla white wall cure putty over plaster surface after thoroughly brushing the surface free from mortar drops dust loose materials and other foreign matter sand papered smooth to give final mattr finished to the surface complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts including all incidental charges.

Pointing on square rubble coursed or uncoursed stone masonry with cement mortar 1:3 (1 cement : 3 Surkhi) raised and cut pointing as directed by Engineer-in- Charge, as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

White washing with lime on undecorated ceiling surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.

Providing plinth protection 50 (Fifty) millimeters thick in cement concrete 1:3:6 {One cement isto Three sand isto Six graded hard stone aggregate 20 (twenty) millimeters nominal Size}.as per HP.PWD.specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing under layer for plinth protection of 75(Seventy Five) millimeters thick (unconsolidated) bed dry brick /stone aggregate 40(Forty) millimeters nominal size well rammed and consolidated and grouted with fine sand including preparation of ground, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall,15*22(Fifteen*Twenty Two) centimeters in cement mortar 1:6 (One cement isto Six sand)and inside plastering with cement mortar 1:3(One cement: Three sand)including earth work and laying 10(Ten) centimeters cement concrete in 1:5:10 {One cement isto Five sand isto Ten graded hard stone aggregate 40 (Forty) millimeters nominal size} and7.50 (Seven point Five Zero) centimeters cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (twenty)millimeters nominal size}and finished with a floating coat of neat cement complete as per standard design and HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing RCC jali sitting room as directed by Engineer-in- Charge, as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm, (Forty into Forty into Six millimeter) thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (Fifty into Twenty Five millimeter) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Twenty Five millimeter) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge. as per HP.PWD. specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing deodar wood work in frames of false celling partitions etc. sawn and put-up in position as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing weep holes in abutments return walls,dirt walls, wing walls with 100 mm (hundred milimetres) dia PVC pipe extending through the full width of the structure with slop of IV:20 (twenty) H towards drawing face complete as per drawing and Technical specification. including carriage of all labour equipments and material to various location through all modes of transportation in all leads and lifts as per the direction of the Engineer-in-charge

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) 15mm niminal dia tube fitting and clamps including making good the wall, ceiling and floor as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and laying in trenches Galvanised Mild Steel tube with filling etc. complete.:25 mm nominal bore (medium grade) (earth work in trenches to be measured and paid separately ) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing PVC water storage tank of ISI: 12701( one two seven zero onw ) marked G.I.inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangements including hosting up to all heights above ground level complete as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. .

Providing and Fxing sand cast iron / cast iron spun spigot and soaket soil waste and ventilaitng pipes (Lead caulked joints to be meansured and paid for separatly complete as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges

75mm dia

100mm diam

Providing and fixing cast iron holder bats including steel bolts to sand cast iron /cast (spun) iron pipes embeded in and including cement concrete blocks 100x100x100mm of 1:2:4 (1 cement :2 sand :4 graded aggregate 20mm nominal size ) including cost of cutting holes and making good the wall complete as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

(a) 75mm nominal diameter/size pipe

(b) 100m nominal dia meter/size pipe

Providing and fixing 100mm dia sand cast iron/cast iron spun fittings and accessories Bends of required degree (any radius) I With oval access door insertion rubber washer 2mm thick, bolts and nuts- .as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Plain 75mm Dia

100mm Dia

Single equal branch of required With oval access door insertion rubber washer 3mm thick bolts and nuts

75mm dia

100mm dia

Collar 75mm dia

100mm dia

Providing and fixing Cast iron cowl complete as per direction of Engineer in charge and as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges.

75mm dia

100mm dia

Providing lead caulked joints to sand cast/iron cast(spun)iron pipes and fittings including testing of joints i/c carriage of materials with all leads and lifts complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

75mm dia

100mm dia

Providing and fixing 100mm dia cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan) size 580mm(five hundred eighty milimeter) (Erth work, bed concrete, foot rest and trap to be measured and paid for separately):-Orrissa Pattern as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing SCI 100mm(one hundred milimeter) size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1(one cement:one sand)as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 10.0/12.50/15.00 (ten point zero/twelve point fifty/fifteen point zero)liters vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm(fifteen milimeter) nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm(forty milimeter) dia C.O. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe tobe measured and paid for separately). as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidential charges.

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25mm nominal dia (over flow pipe to be measured and paid for separately) as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing galvanised steel chain with G.I pull complete as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan complete as per H.P. PWD. Spesification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-Flat back 550x400mm(five hundred fifty into four hundred) milimeter). complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidential charges.

Providing and fixing 32mm dia C.P. Brass chain 50cm long and rubber plug of following sizes for sink or wash basin complete as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts including all incidential charges.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings . as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing C.P. Bottle trap for wash basin and sink 32mm(thirty two milimeter) dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing 32mm (thirty two milimeter) dia P.V.C. waste pipe for wash basin or sink. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation.

Providing and fixing 100 (One hundred) millimeters cast iron grating for gully, nahani and floor trap, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing flat back 600x450mm(six hundred into four hundred fifty milimeter) beveled edge mirror of superior glass mounted on 5mm(six milimeter) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass and screws washers as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws:-750mmx20mm (seven hundred fifty into twenty milimeter) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing chromium plated brass soap dish as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing 15mm ( fifteen milimter )dia . C.P. Brass bib tap ( heavy duty SI marked IS:8931 & 8934 (eight thousand nine hundred thirty one and eight thousand nine hundred thirty four ) of Jaquar with capstan head including carriage of materials within all leads and lifts.

Providing and fixing 15mm ( fifteen milimeters ) dia Brass stop cocks as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Painting C.I. Cistern with bitumastic or any other anticorrosive paint in-side and white paint over a coat of ready mixed primer of approved quality on the outside surface of the cistern, flush, pipe other fittings etc. complete for new work complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260mm x 350 and 340x430x265mm sizes, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required Range of two urinal basins with 10 litres C.I. Automatic flushing cistern complete for new work complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing P.V.C connection pipe with unions:- 45 cm.(forty five centimeter) length 15 mm. (fifteen milimeter) nominal bore (heavy duty ISI marked IS:8931 and 8934)with brass union as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing C.P. brass connection pipe with brass unions 45 cms (fourty five centimeters) length 20mm (twenty milimeters) nominal bore including carriage of all labour, equipment and material to various location through all modes of transportation in all leads and lift, including all incidental charges as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing 15mm (fifteen milimeters) nominal bore brass full way valve with wheel as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing manhole with reinforced cement concrete top slab 1:2:4(One cement: Two sand: Four graded hard stone aggregate 20 (Twenty) millimeters nominal size),foundation concrete 1:4:8(One cement isto Four sand isto Eight graded hard stone aggregate 40(Forty)millimeters nominal size inside plastering 15(Fifteen)millimeters thick with cement mortar 1:3(One cement isto Three sand)finished within a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (Twenty) millimeters nominal size) finished smooth complete including curing and testing Inside size 800*800*500(Eight Hundred into Eight Hundred into Five Hundred deep) millimeters size including cast iron cover with frame (light duty single seal: pattern-1) 455*610 (Four Hundred Fifty Five into Six Hundred Ten) millimeters internal dimensions total weight of cover and frame to be not less than 38 kilograms (weight of cover 23 (Twenty Three) kilograms and weight of frame 15(Fifteen) kilograms. With 200(two hundred) millimeters thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(One cement isto Three sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Supplying cast iron cover without frame for manholes for frame of internal dimension 455mm x610mm rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing sand cast iron / cast iron spun fittings and accessories With oval access door insertion rubber washer 3mm thick bolts and nuts 100mm nominal size as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia.

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

110 mm (one hundred ten milimeters)dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. completecomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

110 mm (one hundred ten milimeters)dia.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought tocourses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve geraded crushed stone agg. 20mm (twenty milimeters) nominal size) in cement mortar 1:6 (one cement isto six sand) at plinth level as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 80 mm (eighty milimeters) as per drawing and Technical Specification Clause 1504, as per direction of Engineer in Charge including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Providing and laying cement concrete work 1:2:4(one cement two sand :four graded crust hard stone aggregate twenty milimetre nominal size)mechanically mixed and vibrated for compacting concrete required strength and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I inlcuding carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. Foundations, and plinth in all depths and levels.

Supplying and stacking at site graded/broken/crushed stone aggregate. The aggregate should be free from harmful materials/ foreign materials such as alkalis, vegetable matter and other deleterious substances, neausea shells or similar laminated materials in such quantities as to effect adversely its strength if tested through appropriate test. Clay, fine silt and fine dust shall not exceeded by more then 1% by weight. It shall also be free from soft friable, elongated pieces and shall be roughly conical in shape The crushing value of aggregate should confirm to the Indian standard. The materials should be stacked in such a way as it does not effect the normal flow of traffic in any way. The stacks should be made as per general specifications of HP.PWD. and instructions of Engineer-in-Charge at site.

25mm size

12mm size

Supplying and filling brick bats in soak pit as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Nikhil Sharma