SMART PERIODICAL SERVICES FOR VARIOUS MD/OTM ACCN AT AIR FORCE STATION AMRITSAR

Amount

Material and labour for preparation of newly plastered surface including fascias, cornices, ceiling walls etc to make the surface free from dust,by skilled labour and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two or more coats of first quality premium Interior acrylic distemper of approved colour of approved make to be applied with fully automatic Electrically operated airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3300 PSI, to prepare the surface even and smooth upto height of 12.00 mtrs all as specified and directed by engineer in charge. Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding at any height complete all as

Material and labour for complete removal of existing treatment including fascias,cornices etc by scrapping with mechanical wall sander (mechanical Electrically operated mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of walls/ceilings to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste of Asian Paints or equivalent make and make good smoothen surface by sand paper after application of wallcare putty of 1mm thickness and applying two or more coats of first quality premium Interior acrylic distemper of approved colour of approved make with fully automatic electrically operated airless spray machine of paint application with a flow speed of minimum one litre per minute having a pressure of 3300 PSI ,prepare the surface even and smooth upto height of 12.00 mtrs all as specified and directed by engineer in charge . Note :- Allow 6-8 hrs to dry the surface in subsequent coats of primer and distemper and including necessary scaffolding at any height complete all specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7*/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste of make and make good smoothen surface by sand paper and applying two coats of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 It (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.91t(undiluted)/10 sq mtrs diluted with water in 1: 1 ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint anplication with a flow speed of minimum 1 lir per minute having a pressureof 3300 PSI along with application of wallcare putty of 1mm thickness upto height of 12.00 mtrs all as specified and directed by engineer in charge.

Matenal and labour for preparation of newly plastered wall surface and applying two or more coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 tr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied lover one coat of acrylic water based exterior grade primer @ 0.9ltrundiluted)/10 sq mirs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 It per minute having a pressure of 3300 PSI along with application of wallcare putty of 1mm thickness upto height of 12.00 mtrs all as specified and directed by engineer in charge . Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed

Notes for smart periodicals item no 1 to 4: (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authonzed applicator complete all as specified and directed. (b) The contractor shall upload MoU between tenderer and manufacturer of painis and their authorized applicator before quoting the birs in Technical bid (Cover-) and submit the same alongwith tender and other documents as mentioned in NIT. Make: (i) Asian Paints - (Interior surface )Tractor shyne interior acrylic emulsion over tru care interior wall primer. (Exterior Surface )Apex dustproof exterior emulsion over tru care exterior wall primer. ii) Nerolac- (Interior surface) Beauty gold interior emulsion over nerolac premium primer. (Exterior Surface) Excel exterior emulsion over nerolac exterior primer. iii)Berger - (Interior surface) Bison interior emulsion over BP white interior primer. (Exterior Surface) Weathercoat exterior emulsion over wallmasta primer. The Make shall be of same manufacturer of which the MoU signed and submitted by Contractor in Cover-1. No change of make/manufacturer and MoU shall be allowed without the prior approval of Accepting Officer. (c) Cost of scaffolding at any height and Requisite PPE equipments, safety; insurance of labour shall be done and cost of same shall deemed to be included in the quoted rate.Contractor shall be responsible for any mishappening/mishap/accident etc and will be liable to compensate labour at his own risk & cost. Nothing extra shall be admissible & paid by the department. (d) Preparation of plastered or unplastered surface or removal of existing jureatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by mechanical sander with internal dust extraction system for clean environment certificate by manufacturer. (e) Finishes i.e interior acrylic distemper , acrylic water based exerior grade primer, premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, parapets etc shall be applied using airless spray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of are putted manufacturer with pro-guard technology and capability of tracking pressure as well as paint and primer usage (f) This equipment shall be certified by approved manufacturer and all equipments/ mechanical spray etc shall be approved by engineer in charge and record of same shall be maintained. (g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so as to achieve uniform application and quality surface finish.

Material and labour for taking down cement plaster of any description on brick walls/ceiling , etc including raking out joints , hacking for key scrubbiong down with water etc complete all as specified

Material and labour for removing old lime wash (if any), hacking for key,raking out joints of old brick work built in cement mortar; not previously plastered and scrubbing down with water etc. to receive plaster all as specified and directed by engineer in charge

Material and labour for 5mm thick cement plastering on ceiling in CM 1:3 finishing the surface fair and even complete all as spd and directed by engineer in charge

Material and labour for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finishing the surface fair and even complete all as specified and directed by engineer in charge

Material and labour for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finishing the surface fair and even in patches not exc 3 sq. m each complete all as specified and directed by engineer in charge

Material and labour for 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto height 12 mtr complete all as specified and directed by engineer in charge

M&L for rendering 20mm thick cement plaster in (15+5mm) on brick/concrete surfaces in cement mortar (1:4) in patches/repars to columns, chajja, canopy and soffits using GI chiken wire mesh (GI chicken wiremesh will not be paid seperately ) as directed including necessary scafolding arrangement as required at site complete all as specified and directed.

Material and labour for fixing 3mm thick glass sheet of ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed by engineer in charge.

Material and labour for preparation of old painted steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of first quality synthetic enamel paint up to height of 12.00 mtrs.complete all as specified and directed by engineer in charge

Material and labour for preparation of old painted steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of first quality synthetic enamel paint up to height of 12.00 mtrs complete all as specified and directed by engineer in charge . Make - Asian Paints,Berger and Nerolac.

Material and labour for prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of first quality synthetic enamel paint up to height of 12.00 mtrs complete all as specified and directed by engineer in charge. Make - Asian Paints,Berger and Nerolac.

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of first quality synthetic enamel paint up to height of 12.00 mtrs complete all as specified and directed by engineer in charge. Make - Asian Paints,Berger and Nerolac.

Material and labour for applying one coat of exterior plastic emulsion paint on old PCC kerb stone surface including making good to the surface of kerb stone by applying and rendering joints with CM 1:4 complete all as specified and directed by engineer in charge. Make - Asian Paints,Berger and Nerolac.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

kapoor and co (BID ID -3198511)