Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹1.5 L
Closing Date
23 Mar 2026, 3:30 pmClosed
The Managing Director, TGMSIDC Hyderabad
3rd Floor, TGMSIDC, DM&HS Campus, Sulthan Bazaar Koti Hyd -95
Providing Medical Oxygen Supply to Critical Care Block, Laying of CC Pavement and Installation of Lifts (2 Nos) for CCB at RIMS Adilabad in Adilabad District.
684641
16-5/TGMSIDC/Civil/2025-26, Dated 17.02.2026
OPEN
Civil Engineering Works
ADILABAD
15 documents required · 15 mandatory
₹5,192
₹1.5 L
6 Mar 2026
6 Mar 2026
6 Mar 2026
CIVIL ITEMS Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete. Brick Masonry:-
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete. Unreinforced cement concrete more than 15cm thickness :-
Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete. Reinforced cement concrete :-
Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308).
Filling with useful available excavated earth by manual means (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., and overheads & contractors profit complete for finished item of work. (APSS NO. 309 & 310)
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402).
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402).
Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite metal and 20mm graded machine crushed hard granite metal (coarse aggregate) in (2:1) ratio from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc. to site, sales & other taxes except GST on all materials, all charges for mixing, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc.,for finished item of work for footings and basement.
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Footings :-
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Plinth Beams :-
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns :-un supported height up to3.66m :- First Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Columns :-un supported height up to 4.27m :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) 450mm thick side walls : First Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). RCC SLABS, BEAMS : Roof Beams : un supported height up to 3.6m :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). RCC SLABS, BEAMS : Roof Beams : un supported height up to 4.27m :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). RCC SLABS, BEAMS : Roof Slabs 300mm thick : un supported height up to 3.6m :- First Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). RCC SLABS, BEAMS : Roof Slab 150mm Thick : un supported height up to 3.6m :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, Steel Centering Plates,etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). RCC SLABS, BEAMS : Roof Slab 125mm Thick : un supported height up to 4.27m :- Fourth Floor
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Concrete Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials , centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903). Sun-shades: Fourth Floor
Plain Cement Concrete M 20 design mix using Concrete Batching Plant, 20mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 330 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps & Sheet Rock.
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer as per IS 1786-2008) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work. (APSS No.126). First Floor :-
Providing Thermo Mechanically Treated (TMT) (Fe -500/500D/550D from Primary producer as per IS 1786-2008) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work. (APSS No.126). Fourth Floor :-
Masonry work in CM (1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). First Floor :-
Masonry work in CM (1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). Fourth Floor :-
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., omplete for finished item of work. (APSS No. 901 & 903). Fourth Floor :-
Ornamental ceiling plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in- harge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) Fourth Floor :-
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904). for internal walls. Fourth Floor :-
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904). for external walls. First Floor :-
Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904). for external walls. Fourth Floor :-
Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710) Fourth Floor :-
Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 350Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. including cost & conveyance of all material, labour, over heads and contractors profit complete as directed by the Engineer in Charge.
Supply and fixing ornamental MS Main gate of size 9mts x 3.75 mts ( average height) i.e., varying from 3mts to 4.50 mts at centre as per the approved drawing using MS Angle of 75mm x 75mm x 6mm alround for frame and 63mm x 6mm MS Flats in 6 rows horizontally, 25mm MS Square bars at 125mm c/c and CI Spikes 9" long on top and 6" long CI spikes in the middle in two rows including 6 Nos of Pin clamps fixed in RCC Columns, 2 Nos of MS aldrops 450 mm Long ( special ) welded at the the centre on each side, 2 Nos of MS tower bolts 450mm Long ( special )and providing brass emblem on emboseed cover in the centre of the two leaves and fixing 2 Nos. of rollers per each leaf including cost and conveyance of all materials,fabrication charges , welding charges, incidental charges and all labour charges, over heads and contractor profit etc., complete for finsihed item of work.
Supply and fixing ornamental MS Wicket gate Size 1.50m x 3.00m as per the approved drawing using 75mm x 75mm x 6mm MS angle alround for frame and 63mm x 6mm MS flats in 6 rows horizontally, 25mm MS square vertical bars at 125mm c /c and CI spikes 9" long at the top and 6" long spikes in two rows in the middle, 3 Nos of Pin clamps fixed in RCC columns, providing 2 Nos.of MS powder coated aldrops 300mm long including cost all taxes and conveyance of all materials,fabrication charges welding charges incidental charges all labour charges, overheads and contractor profit etc., complete for finsihed item of work.
Providing cattle trap including cost of excavation of trap pit and laying 100 mm hick PCC (1:5:10) prop bed in 1:50 slope using 40 mm HB Granite metal including constructing 230 mm thick walls alround and middle in PCC M20 Design mix using 20 mm HBG graded metal, 325 mm average height over the bed and duly fixing 7 nos of ISLB 125 x 75 @ 11.9 kg/mt at 470 mm centre to centre and welding 25 mm dia HYSD bars duly inserted in GI B class pipe 50 mm dia (13 nos in all) over ISLB @ 80 mm centre to centre 25 mm dia MS small pieces of 0.15 m length for pedestrains (76 nos in all) and including plastering the exposed faces of walls and base in CM 1:5 prop 20 mm thick in single coat duly maintaining 1:50 slope including providing 200mm dia SWG drain pipe to be connected to the nearest valley to drain off the collected water inside the trap including cost and conveyance of all materials, to site, all labour charges including cutting, welding of bars to (ISLB) RS joists, curing centering, over heads and contractor profit etc., complete for finished item of work as per the approved drawing.
Supply, fabrication and fixing of bed side curtains made of aluminium channel with curtain track and down rod with two clamps and wall brackets and PVC curtain cloth and runners will be provide d as per the requirement of approved colour and pattern with all cost of materials and labour charges, all taxes, transportation charges, fixing charges etc complete for finished item of work.
Supply and fixing of Cement Bonded Prelaminated Particle Board aluminum glazed partitions using 10mm Cement Bonded Prelaminated Particle Board and 5.00mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution including overheads & contractors profit etc., complete for finished item of work.
Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board (One side choice colour and other side balancing white lamnation) in the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required , embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete (Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved by the Engineer) (2000mm x 2600mm).
Painting to old walls with two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls after brushing the old surface removing the durt materials from the surface of the wall including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Painting to old walls with two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls after brushing the old surface removing the durt materials from the surface of the wall including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.
Supplying and fabricating, erecting and fixing in steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges of approved design and including cost and conveyance of all materials, labour charges for erecting & fixing all structural steel works erecting in position and fixing etc., complete in position, labour charges for fabrication, all incidental charges, overheads and contractor profit etc., complete for finished item of work as directed by the Engineer-in-Charge
ELECTRICAL WORKS CONDUIT PIPE Supply and Fixing of ISI 25mm outer dia medium grade, with IS:9537 part 3 rigid PVC with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Finolex / Modi / VIP/ Precision / Million / Goldmedal / GM/ DEC / Beljin.
WIRING Wiring with run of 2 of 1.5 Sqmm Class-II conductor HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable. in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light, Fan, Exhaust fan and bell points in N.R.B. Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King. Makes switches : Legrand Arteor / Schneider Zencelo / Honeywell Blenge Plus /Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova/ LK -Englaze / Million M-Vee.
Supply and fixing of 10A 3/2 Pin 2 Module Modular Socket with shutter with 6 / 10A 1 Way 1 Module Modular Switch, 3 Module box with cover frame in Common switch board including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes switches : Legrand Arteor / Schneider Zencelo / Honeywell Blenge Plus /Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova/ LK -Englaze / Million M-Vee.
Supply and fixing of 16A / 6A 2 Module Combi Socket Modular Socket with shutter with 16A/20A 1 Way 1 Module Modular Switch fixed on suitable size Modular box with required cover frame including with connections, cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B. Makes switches : Legrand Arteor / Schneider Zencelo / Honeywell Blenge Plus /Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova/ LK -Englaze / Million M-Vee.
Supply and Run of 3 of 2.5 sq.mm class-IIconductor (phase, neutral and earth) HFFR PVC insulated 1100V grade as per IS:694/2010, IS 17048 specifications for Copper cable of in existing pipe. Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King.
Supply and Run of 3 of 4.0 sq mm (phase neutral and earth) HFFR PVC insulated 1100V grade as per IS:694/2010, IS 17048 specifications for Copper cable of in existing pipe for power points and AC Sockets inlcuding all labour charges etc., complete. Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King.
Supply and Run of 5 of 10.0 Sq.mm HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specifications for Copper cable in the existing conduict pipe for run of mains from VTPN / Panel Board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King.
DISTRIBUTION BOARDS Supply and fixing of 8 Way SPN DB with IP 43- Protection as per IS:13032 and suitable for 8 Nos S.P out goings and for 1 No Incomer with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, din bars and detachable gland plate etc complete with inter connections. DB Makes :Legrand / Schneider / Siemens/ LK / Havells Stadx / ABB / BCH MCB Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK Exora / BCH / Havells Stadx
EARTHING Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)
Supply and Run of No.8 /10/14 SWG Copper Plate / Strip / wire including cost of all accessories and labour charges etc., complete. (0.264Kgs/1Mtr)
FIXTURES Supply, transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / HPL / Eveready / Surya / Keselec / Arraystorm / GM / Goldmedal / Goldwyn / Fortune Arrt / Lighting Technologies / Bee-Lite LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs. Make & Model will be Approved by the Head Office / Engineer-in-charge.
Supply and transportation of 10W LED Bulk head fitting with milky diffuser heat sink integrated with housing with all accessories etc complete with 5 years warranty warranty. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / Keselec / Fortune Arrt / HALONIX / HAVELLS / HPL / SYSKA / SURYA / Arraystorm / GM / Goldmedal / Jaquar / Panasonic / Leksa / Orient LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.
Supply of 12" (300mm) Light duty exhaust fan with metal blades etc complete. Makes :Crompton / Havells Ventilair- DSP / Orient hill air.
Labour charges for fixing the exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete. Makes : Finolex / RR Kabel / Havells / Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Pawancab
Supply, Transportation and Run of Cat - 6 UTP cable for LAN in the existing conduit pipe and labour charges etc., complete. Makes : D Link/AMP/Molex/Legrand/Krone/R & M .
Supply of 35 Sqmm, 3.5 Core XLPE insulated,1100V grade armoured alluminiumcable with ISI mark as per specificationconfirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal /Polycab / Havells / KEI / RR kable
Laying of PVC armoured under ground cable up to 70 Sqmm fixing on chromium plated metallic base saddles on wall as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete.
Termination of UG cables for 3.5 core 35 sqmm XLPE insulated armoured cable with fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket, with required lugs etc complete. Makes: SMI / Commet / Dowels.
20 Persons Bed cum Passenger Lift Supply, transportation, installation, testing and commissioning of 20 passenger, G+2 Bed cum / passenger, 1.0 Mtr / Sec Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period. Make & Model and Lift shop drawings approval shall be obtained from Head Office / Engineer-in Charge. Makes: Schindler / Kone / OTIS / Mitsubishi or equivalent. Specifications: a) Type : Machine room less b) Pit Depth :1500 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d) Travel height : 3.6 to 4.0mtrs e) Head room Height : 4.5mtrs f) Lintel Height (Required) : 2240 mm from finished floor level +/- 10% g) Number of persons : 20 P h) Rated Load : 1360 Kgs i) Number of Stops : 3 j) Number of Access sides : 1 k) Floor Designations : G, 1, 2. l) Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m) Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n) Speed of Travel : 1.0 Mtr / Sec o) Car size : As per Standard p) Door width : 800/ 900/1000mm or As per Standard q) Door Height : 2000 mm or as per standard r) Rated output motor : as per standard s) Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t) Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u) Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment display v) Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition. w) Special Features : Closed loop control system Self Diagnostic control Overload detection Automatic evacuation to nearest floor (ARD) Light curtain on car entrance Alarm Horn Fire Switch Handrail in stainless steel finish on rear wall Auto Fan off Auto light off Intercom-3way.
Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000 watts 5 Star rated water heater with ABS plastic body of 25 Ltrs capacity to withstand up to 8.0 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete. Makes : Crompton / Jaquar / Venus / Racold / AO Smith / Goldmedal / GM / Havells / Bajaj or equivalent as approved by the Dept.
Supply, Transportation and Installation of 16" (400 mm) BLDC 30 W Wall Mounted Fan With Service Value 2.7 CMM / WattWith All accessories etc., complete. Makes : Crompton / Atomberg / Orient / Havells / Hallonix / Goldmedal / GM.
Surveillance Supply, Transportation, Installation, Testing and Comissioning of 2MP Domecamera 1/2.8'' CMOS progressive sensor, 2.7 to 13mm Motorized lens, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, Max 30 fps, IR distance - 40Mtr or better, 120 dB or better WDR, triple stream, Protocal : IPv4, TLS, DHCP, IPv6, TCP / IP, HTTP, SMTP, UDP, HTTPS, RTSP / RTP / RTCP,DNS,SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Line crossing, Face Detection, Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage : up to 256GB; Alarm IN & Outputs, Audio IN & Out; ONVIF-S, G, T, M; Security: HTTPS, Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128 / Telnet closed, IP Filter, PCI-DSS compliance;IP67,IK10, UL,CE,FCC, NDAA Compliant including 5 yrs warranty to be obtained from the OEM. MAKES: Bosch / Honeywell / Axis / Mobotix. or equivalent as approved by Department
Supply, Installation, Testing and Comissioning of 2MP Bullet camera 1/2.8'' CMOS progressive sensor, 2.7 to 13mm Motorized lens, min. illumination 0.006 Lux F1.6 (color), 0 Lux B/w, 50dB S/N ratio; 1/8 ~1/32000 shutter speed, Max 30 fps, IR distance - 60Mtr or better, 120 dB or better WDR, triple stream;Protocal: IPv4, TLS, DHCP, IPv6, TCP / IP, HTTP, SMTP, UDP, HTTPS, RTSP / RTP / RTCP, DNS, SNMP, IGMP / Multicast, NTP, QoS, 802.1X, ICMP, ARP; Line crossing, Face Detection, Motion Detecton, People counting, Intrusion, Loitering, SMD, Tampering; local storage: up to 256Gb; Alarm IN & Outputs, Audio IN & Out; ONVIF-S, G, T, M; Security: HTTPS,Digest authentication, User account and password protection,TLS1.2 only, Stream encryption, AES128/ Telnet closed, IP Filter,PCI-DSS compliance; IP67,IK10, UL, CE, FCC, NDAA Compliant, including 5 yrs warranty to be obtained from the OEM. MAKES: Bosch / Honeywell / Axis / Mobotix. or equivalent as approved by Department.
Supply, installation,Testing and Comissioning of 32 channel NVR (Network Video Recorder) Max. 12MP Camera supported,256Mbps network camera recording,Support 4K video out on HDMI monitor,Support Dual monitor video out,Support H.265, H.264, MJPEG compression, Wise Stream support, Max. 8 internal HDDs (48TB), e-SATA / iSCSI storage support, Support RAID 5 Easy installation with front swap hard disks ARB & Failover (N+1) support, UL Cerfified NVR. Make: Samsung Model:XNP6320H or its equivalent specification. Makes : Honeywell / Sony /Panasonic.
Supply and installation of Surveillance 8 TB Hard Disk. Make : WD / Seagate or equivalent as approved by Department
Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ratio 4000:1, Response time 8ms, icluding 3 yrs warranty Approved Make : Samsung / LG or equivalent as approved by Department
Supply and Installation of 8 port 10 / 100 / 1000 Gigabit PoE switch with GIGA fibre slots (SFP). Makes : TP Link / D link. or equivalent as approved by Department
Installation, testing , Commissioning & Integration of CCTV system in Control room including mobile configuration and communication of entire syatem as per the directions of Engineer-in-Charge.
FIRE FIGHTING SYSTEM INTERNAL HYDRANT SYSTEM Supply and fixing single headed internal / External hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and chain as required. Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar.
Supply and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar.
Supply and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Make: Mini Max / Safex / Newage / Winco / Newtech / Padmini / Kartar.
Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. Make : Mini Max / Safex / Newage / Winco / Newtech / Padmini./ Kartar.
Supply and fixing First - Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585. Make: Eversafe / Newage / Newtech / SRI. b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Newtech / Safex. c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes. 100 mm dia 'B' Class
Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes. 80 mm dia 'B' Class
Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes. 25 mm dia 'B' Class
Supply, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell / Kartar. 100mm dia
Supply, installation, testing and commissioning of approved make 25 mm dia. With automatic air release valve with unions etc. complete. (PN 16) ( Spring loaded type).
Supply, Fabricating, Installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts, washers etc complete with painting.
Supply of XLPE insulated 1.5 Sqmm Armoured 2 core FRLSZH fire alarm cable (RED) and fire survival cable confirming to IS 7098 (part1) 1998, 1100V grade 2 Core ISI marked with standard solid conductor. Makes : Batra Henlay / Havells / RR kable / Polycab.
Supply, installation, testing and commissioning of C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required. Makes: Audco / Kirloskar / BDK / HShankar / Leader/ Zolotto / Intervalve / Honeywell./ Kartar. 100 mm dia
Supply, installation, testing and commissioning of C.I. flanged " Y " type strainer with SS Mesh , suitable flanges, nuts, bolts, gaskets etc., complete. (PN 10 Rating)
Supply, Transportation, installation, testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 LPM at 45 Mtr head conforming to IS 1520. b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS- 325. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather & Platt / KSB / CRI. Makes of Motors : Siemens/ ABB / Kirloskar / KSB / CRI.
Supply, installation, testing and commissioning of Pressure Switch (PN 20 bar) of suitable range for pump sets with Ball valves, fittings like unions / colours / reducers etc., Make : Danfoss / Indfoss.
Supply, installation, testing and commissioning of Pressure gauges ( PN 20 bar) of suitable range for pump sets with Ball valves, Fittings like unions / colours / reducers etc.(Glistering filled). Makes : HGURU / FIEBIG.
Supply and fixing 2 Way Fire brigade connection cast iron body with 2 Nos Gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. Make: Mini Max / Safex / Newage /Winco / Newtech / Padmini / Kartar.
Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / Honeywell / Kartar
MEDICAL GAS PIPE LINE SYSTEM Supply and fixing of Copper Pipe Lines of 28 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost and conveyance of pipes, necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work 28mm O.D x0.9mm thick copper pipe
Isolation Valves Supply and fixing of 28 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work. 28 mm Valves
VALVE BOX CE Certified as per specifications 4 services
Single Gas Microprocessor Controlled Alarm
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
~$ Ayush WGL.docx
TENDER_DOCUMENT • 0.00 MB
BOQ CCB Lifts.xlsx
TENDER_DOCUMENT • 0.03 MB
TD CCB Lifts ADB.docx
TENDER_DOCUMENT • 0.48 MB
Download all tender documents and submit your bid