Karnataka

Active

Works

Buildings

Renovation of Anduvane Temple, Huigere Gram Panchayat, Chikkamagaluru Taluk, Development of Roads in Shivanagara Schedule Caste Colony B. Kanabur Grama Panchayat in Narasimharajapura Taluk, Development of Billava Samudhaya Bhavana, Koppa Taluk & Construction of Karnataka Public School Rangamandira and Installation of interlock in Narasimharajapura Town, Narasimharajapura Taluk, Chikkamagaluru District.

Public Works Department

PRAMC PWD Bengaluru | Bengaluru, Karnataka

Amount: ₹63.2 LCloses: 11 Sept 2026Due today

Timeline

Published25 Aug 2026
Pre-Bid Meeting3 Sept 2026
Closes11 Sept 2026
Bid Opening15 Sept 2026

Tender Value

₹63.2 L

EMD Value

₹64,000

Closing Date

11 Sept 2026, 5:30 pmDue today

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Mobile Number

Work Description

Renovation of Anduvane Temple, Huigere Gram Panchayat, Chikkamagaluru Taluk, Development of Roads in Shivanagara Schedule Caste Colony B. Kanabur Grama Panchayat in Narasimharajapura Taluk, Development of Billava Samudhaya Bhavana, Koppa Taluk & Construction of Karnataka Public School Rangamandira and Installation of interlock in Narasimharajapura Town, Narasimharajapura Taluk, Chikkamagaluru District.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT36183

Reference Number

PWD/2026-27/BD/WORK_INDENT36183

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PRAMC PWD Bengaluru

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredCompany Registration Certificate

RequiredKPWD Registration Certificate

RequiredAnnual Turnover certificate for the past five years along with Balance sheets and UDIN mentioned duly attested by Charted accountant

RequiredWorkdone certificate issued by an Officer not below the rank of EE or equivalent

RequiredSection 2 ITT 3.2a as mentioned in bid document

RequiredSection 2 ITT 3.2b as mentioned in bid document

RequiredSection 2 ITT 3.2c as mentioned in bid document

RequiredSection 2 ITT 3.3 as mentioned in bid document

RequiredSection 2 ITT 3.6 as mentioned in bid document

RequiredReserved Category Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

GST Shall be paid to the tendered amount separately.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Public Procurement Portal due to internet connectivity issues and technical glitches at bidders end.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

Contractors should be registered with KPWD Class-1, Class-2, Class-3 Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

All the items in the tender include all lead, lifts, labour, loading, unloading, transportation, hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer-in-charge of this work.

Contractors should follow strictly prevailing rules of labour act.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, if an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

Materials like bitumen, steel,cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority at his cost before used on the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or an officer not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for. Failure to produce original documents leads to rejection of Tender.

Financial Year will be reckoned as the period between first day of April and Thirty-first day of March of succeeding year (both days inclusive).

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Units, Rates & Prices shall be quoted by the tender in Indian Rupees only

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The field Lab/Mobile Lab shall be preferably located, adjacent to the site with the required amenities as per the clause. Failing which 1% of the amount of work done will be penalized.

Tenderer shall obtain the Work done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification.

Tenderers are requested to read the Bid documents carefully and upload the necessary documents before submission of their bid.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-3

Payment of EMD of shall be through E-Payment in favour of Executive Engineer, and shall be valid for 45 days beyond the validity of Tender

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer PWD, PRAMC, during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a general holiday the next working day will hold good in lieu of the dates mentioned.

The contractor should maintain the work during the defective liability period, i.e. for 2 years after the completion of work at his own cost.

GST Shall be paid to the tendered amount separately

The Bidders shall note that the information furnished in technical Bid will be evaluated with respect to the Technical requirement Criteria set forth in the Bid Document, which is uploaded separately. The Bids meeting the minimum Technical criteria at the discretion of the Engineer-in-Charge shall only be qualified for financial Evaluation of Financial Bids.

PERFORMANCE SECURITY: As per Go No. FD/611 Exp-12/2023, Bengaluru Dt: 03.02.2024, Security deposit for an amount equivalent to 5% of the Contract price payable shall be deducted in every running bill. However, in case of first and final bill the entire Security deposit will be deducted from the final bill.

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (b)Satisfactorily completed as a prime contractor for at least any construction work to an extent of 25% of the cost of the work and the value not less than Rs.15.81 Lakhs.

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (C) Executed in any one year, the following minimum quantities of work: 1. Plain Cement Concrete (PCC)/ Reinforced Cement Concrete (RCC) 39.00Cum 2. TMT Steel 1.90 Tonne 3. Flooring/ Dadooing/ Granite/ Vitrified Tiles/ Ceramic/ Glazed Tiles 80.00Sqm 4.BBM/ Solid Blocks 57.00Cum/Sqm 5. Plastering Work 191.00Sqm 6. Painting (OBD/ Textured/ Wood and Metal Painting) 417.00Sqm 7.Embankment/Subgrade 14.00 Cum 8.GSB/WMM 41.00 Cum 9.PQC 35.1 Cum

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

Capabilities of Vendor

To qualify for award of this contract, each Tenderer should be registered as Class-I, Class-II, Class-III Civil Contractor in KPWD

PWD Registration Certificate (Class I/II/III/IV)

Section 2 ITT 3.6 - Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under. Assessed available tender capacity (AxNx5.0-B) Where, A is Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited. B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 6 months

Others -- Work done, Balance work done certificate issued by an officer of rank not below the rank of EE or equivalentOthers -- List of existing commitments and ongoing worksOthers -- List of works for which tenders already submitted

Financial Status

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 to 2025-26 (a)Achieved in at least one financial year a minimum financial turnover (in all classes of Civil Engineering construction Works only) of Rs.63.24 Lakhs.

Audited CA Certificate of Annual TurnoverITR Filed Copy (Mentioning PAN)Others -- Turnover certificate from Registered Chartered Accountant, Balance sheet and Income tax returns

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate (b) liquid assets and/or availability of credit facilities of not less than Rs.18.98Lakhs (Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc.)

Others -- Bankers certificate in the prescribed format issued by Nationalized bank as per KW-3

Annual turn over certificate

Others -- Annual Turnover certificate for the past five years along with Balance sheets and UDIN mentioned duly attested by Charted accountant

Others

GST Registration Certificate

Others -- Scan copy of GST Registration Certificate

Fee & Financial Details

Tender Fee Amount

₹1,590

EMD Fee Amount

₹64,000

Important Dates

Last Activity

4 Sept 2026

Published

25 Aug 2026

Bid Opening

15 Sept 2026

Download Ends

2 Sept 2026

Pre-Bid Meeting

3 Sept 2026

BOQ Preview

•

Renovation of Anduvane Temple, Huigere Gram Panchayat, Chikkamagaluru Taluk.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost and conveyance of all materials. labour, hire charges of machi...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

supplying and fixing new Mangalore tiles on existing reepers. ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading a...

•

Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2. ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lif...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Development of Roads in Shivanagara Schedule Caste Colony B. Kanabur Grama Panchayat in Narasimharajapura Taluk

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 ...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Development of Billava Samudhaya Bhavana, Koppa Taluk BUILDING WORKS Ground Floor

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Including cost and conveyance of all materials. labour, hire charges of machi...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Including cost and conveyance of all materials. la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Including cost and conveyance of all mate...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 150x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm ---- Including cost and conveyance of all materi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm ---- Including cost and conveyance of all materials. la...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Door stopper 75mm ---- Including cost and conveyance of all materials...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- Including cost and conv...

•

Providing and fixing door latch with necessary screws etc complete. - Bright finished brass latch ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipmen...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Development of Billava Samudhaya Bhavana, Koppa Taluk-Sanitary & water supply

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy ---- Including cost and conveyance o...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- Including cost and conveyance of all materials....

•

Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- Including cost and conveyance of a...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 25 mm nominal bore ---- Including cost and conveyance of all materials. labour, hire charg...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 40 mm nominal bore ---- Including cost and conveyance of all materials. labour, hire charg...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 50 mm nominal bore ---- Including cost and conveyance of all materials. labour, hire charg...

•

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded Elbow 20X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges o...

•

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded Elbow 25X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges o...

•

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded Elbow 40X1-1/4mm ---- Including cost and conveyance of all materials. labour, hire charges...

•

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded Elbow 20X1/2mm ---- Including cost and conveyance of all materials. labour, hire char...

•

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded Elbow 25X1/2mm ---- Including cost and conveyance of all materials. labour, hire char...

•

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded Elbow 40X1-1/4mm ---- Including cost and conveyance of all materials. labour, hire ch...

•

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded TEE 20X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges of ma...

•

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded TEE 25X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges of ma...

•

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Male Threaded TEE 40X1-1/4mm ---- Including cost and conveyance of all materials. labour, hire charges of ...

•

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded TEE 20X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges o...

•

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded TEE 25X1/2mm ---- Including cost and conveyance of all materials. labour, hire charges o...

•

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 - PPR Female Threaded TEE 40X1-1/4mm ---- Including cost and conveyance of all materials. labour, hire charges...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 20 mm nominal bore ---- Including cost and conveyance of all materials. labour, hire charges of machineries an...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and ...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 50 mm nominal bore - Horizontal ---- Including cost and conveyance of all materials. labour, hire charges...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 40 mm nominal bore - Horizontal ---- Including cost and conveyance of all materials. labour, hire charges...

•

PVC pipes of 8 Kg/cm2 for 140mm(3.097) ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges e...

•

PVC pipes of 10 Kg/cm2 for 200mm ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... c...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10...

•

Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm di...

•

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing CP brass 32mm size Bottle Trap of approved quality

•

& make and as per the direction of Engineer-in-charge. ---- Including cost and conveyance of all materials. labour, hire charges...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Elbows ---- Including...

•

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost and conveyance of all materials. labour, hi...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost and conveyance of all materials. labour, hire charge...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 25 mm nominal bore - Horizontal ---- Including cost and conveyance of all materials. labour, hire charges...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Development of Billava Samudhaya Bhavana, Koppa Taluk-Electrical works

•

Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing PVC/metal conduit Deep junction box

•

19/20 mm deep Junction box

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all le...

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unload...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead an...

•

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A One Way Switch

•

---- Including cost and conveyance of all materials. labo...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

6A Three Way socket

•

---- Including cost and conveyance of all materials. la...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Stepped Fan Regulator Two Module

•

---- Including cost and conveyance of all ...

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... complete as directe...

•

6/16A Universal Socket

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... complete a...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.

•

---- Including cost and conveyance of all materials. labour, hire c...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.

•

---- Including cost and conveyance of all materials. labour, hir...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power fact...

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board."

•

6A Batten Holder

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries ...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

•

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.

•

LED Street light

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries ...

•

Supplying and fixing of mm dia c;ass A GI pipe backet upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole/wall using...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Construction of Karnataka Public School Rangamandira and Installation of interlock in Narasimharajapura Town, Narasimharajapura Taluk

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of ...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing precoated galvanised steel sheet roofing accessories

•

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( ...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing & fixing 100% Polyester Curtains with specification of

•

regular wash as per direction of Engineer in charge ---- Including cost and conveyance of all materials. labour, hire charges ...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Supplying heavy gauge PVC conduit pipe32 mm dia 2.5mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceili...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral) & 1x1.0sqmm (Earthwire) FRLS multistrand PV...

•

Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade , multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

•

Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade , multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

•

Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade , multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...

•

Supplying of recess mounting non integrated type LED downlight 10 12W luminaire comprising of pressure decast / extruded aluminium housing ,with spring loaded falseceiling clamps ,LED of Power / COB w...

•

Supply of LED flood light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Tender Notification No12.pdf

Others - Tender Notification • 1.01 MB

KW3-36183.pdf

Tender Document • 0.61 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .