Levelling landscaping and construction of Gang Hut Operators Room and other allied works at 19.00 MGD Water Treatment Plant Nishat. Under Languishing Programme

Amount

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50meters lead: of G.S Sheet.

Dismantling wood work in frames, trusses, purlins and Rafters upto 10mtrs span and 5mtrs height including stacking the material within 50mtrs lead: of sectional area 40sqm and above

Dismantling old plaster or skirting, raking out joints & cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead:1:3:6 or richer mix

Earthwork in excavation by manual means in trenches of foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth up to 1.5 mts from cutting edge, disposed earth is to be leveled and neatly dressed in: (All kinds of soil).

Providing/ laying of stone soling hand packed in trenches. (Nallah)

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 mix(1 cement : 4 coarse sand: 8 graded stone agg. 40mm nominal size.

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 mix(1 cement : 2 coarse sand: 4 graded stone agg. 20mm nominal size.

Reinforced cement concrete work in beams, suspended floor, roofs having slope up to 150 landing, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. (TMT bars).

Centering & shuttering incl. strutting, propping etc. and removal of form work for:

Foundations, footing, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Columns, pillars, piers, abutments, posts and Struts.

Lintels, beams, plinth beams, girders, bresumers and cantilevers.

Stairs other than spiral stair cases

Edges of slabs and breaks in floors and walls. Under 20cms wide.

Brickwork with common burnt clay FPS (non-modular) bricks of class designation 75 in foundation & plinth in: Cement mortar 1:6 ( 1 cement: 6 fine sand).

Extra for Brick work in super structure above plinth level up to floor v level (by manual means)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (holed fast lugs or with dash fasteners shall be paid for separately). (Kiln seasoned & chemically treated hollock wood).

Providing & fixing 35mm thick panelled or panelled and glazed shutters for doors, windows & clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of engineer in-charge. (Kiln seasoned & chemically treated hollock wood).

Providing & fixing panelling or paneling and glazing in paneled or paneled & glazed shutters for doors, windows & clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. (Kiln seasoned & chemically treated hollock wood).

Providing 40X5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts , nuts & wooden plugs and embedding in cement concrete block 30x10 x15cm 1:3:6 mix (1 cement: 3coarse sand: 6 graded stone aggregate 20mm nominal size)

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows. ISI marked M.S pressed but hinges bright finished butt hinges of required size with necessary screws. (Kiln seasoned & chemically treated hollock wood).

Providing and fixing of nickel Plated M.S. pipe curtain rods with nickel plated brackets.25mm dia (Heavy type)

Providing & fixing ISI marked Oxidized M.S sliding door bolts with nuts and screw etc. complete. 250 X 16mm

Providing & fixing Aluminium tower bolt ISI marked anodized with necessary screws etc. Complete.

Providing & fixing Aluminium handles ISI marked anodized confirming to IS : 4922 with necessary screws etc. Complete.

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1cement : 4 fine sand)

6mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand)

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing, hoisting and fixing trusses/purlins/rafters/posts/post plates or like components including cost of screws etc. Complete. (first class budloo/Fir wood)

Fixing charges of available wood work including cost of bolts/screws etc.

Providing and fixing of specified wooden frame work consisting of battens of size 50 x 25mm by using budloo wood duly fixed on walls by nails/rawl plugs. The job includes all leads & lifts, scaffolding charges, T&P and all sorts of carriages involved and is to be carried out as per the direction of site in-charge. Complete.

Providing and fixing of imported wooden paneling of size 100mm x 10mm including screws, finished with polishing but excluding frame work. All complete.

Providing and fixing of Dura shine green coloured G.I corrugated sheets 0.45mm thick to be fixed with truss by hooks/bolts with matching colour tops including all sorts of carriages involved. all complete.

Fixing charges of available material including cost of hooks/bolts etc. Complete.

Providing ridges or hips of width 60cm overall width plain G.S sheets (coloured) fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I limpet and bitumen washers complete. (0.63mm thick green coloured)

Providing and fixing of plain G.S Sheets for eaves boading 250mm wide. The job includes cost of nuts, bolts, washers, scaffolding charges, handling charges and all sorts of carriages up to the site of work. The job is to be carried out under the supervision of site in-charge.

Providing and fixing of G.S coloured panel type sheets as soffit (Chajja). The job includes cost of nuts, bolts, washers, scaffolding charges, handling charges and all sorts of carriages up to the site of work. The job is to be carried out under the supervision of site in-charge.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded particle board IS:3087 Marked to frame, backing or studding with screws etc. complete. (Frames, backing or studding be paid separately) 12mm thick.

Random rubble masonry with hard stone from quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement:6 Coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with

Extra for random rubble masonry with hard stone from quarry in foundation and above plinth level uo to floor v level including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate).

Providing and fixing wooden moulded corner beading of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. (Second class kail wood).

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25mm thick second class deodar wood.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave holdfasts etc. complete & stacking within 50 mtrs lead: of area of 3 sqm and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (holed fast lugs or with dash fasteners shall be paid for separately). (Second class Kail wood).

Providing and fixing 35mm thick panelled & glazed shutters for doors, windows & clerestory windows incl. ISI marked M.S Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer-in charge. (Second class Kail wood).

18mm cement plaster in two coats under layer 12mm thick in 1:5 mix and top coat 6mm thick in 1:6 mix.

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc as required.

In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works.

In stringers, treads landings etc. of stair cases including use of chequered plate wherever required. All complete.

Providing/fixing gang saw cut mirror polished (pre-moulded and pre-polished) machine cut for kitchen platform, vanity counters shade colour and texture laid over 20mm thick base cement mortar 1:4 with joints treated with white cement, mixed with matching pigment, epoxy touch ups including rubbing, curing moulding and polishing to edge to given high gloss finish etc complete at all levels. (Granite of any colour and shape (area of slab up to 0.5 m2). 16mm thick

Providing & fixing water closet squatting pan( Indian type W.C. pan) with 100mm sand cast Iron P or S trap,10 liter low level P.V.C flushing cistern (of approved make) manually controlled device (handle lever) conforming to IS:7231, with all fitting & fixtures complete, incl. cutting & making good the walls & floor wherever required. Long pan pattern white vitreous china W.C. Pan of size 580 mm.

Providing & fixing white vitreous china pedestal type water closet (European type) with seat and lid, C.P brass hinges & rubber buffers, 10 litre low level vitreous china flushing cistern with fittings, C.I/M.S. brackets, 40mm dia flush bend, overflow arrangement with specials of standard make & mosquito proof coupling of approved municipal design complete including painting of fittings & brackets, cutting & making good the walls & floors whatever required. (W.C pan with ISI marked white solid plastic seat & lid with white vitreous china flushing cistern & C.P flush bend.).

Providing/ fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar taps, Kingston/ Gem/ Techno/ Parko/ Jagnar/ Escko, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the walls wherever require (White Vitreous China). Wash basin size 630 x 450mm with a pair of 15mm C.P brass pillar taps.

Providing & fixing of Salem stainless steel ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40 mm incl. painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 178 mm.

Providing and fixing of PVC pipe and pipefittings of ISI mark & standard quality including bends, door junction etc. for drainage of water closet and kitchen water to the disposal including earth excavation and all sorts of carriages complete.

100mm dia PVC pipe

50mm dia PVC pipe

Providing and fixing of chromium plate S.S. bathroom/kitchen pipe fitting including all accessories of ISI marked and of standard make all complete.

15mm dia Pillar cock

15mm dia Bib cock

15mm dia Mixer

Providing /laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. (Size of tile 60x60cm).

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5mm of approved make like Nitco, Orient, Somany, Kajaria or equivalent make in all colour shades or burgundy, bottle green, black of any size as approved by in-charge Engineer, skirting, risers of steps & dodos over 12mm thick bed of cement mortar 1:3 (1 cement: 3 course sand) and jointing with grey cement slurry @ 3.3Kg/ Sm including pointing in white cement mixed with pigment of matching shade. Complete.

Providing and fixing of Aluminium work for doors and partitions with extruded built up standard tabular section/appropriate z-sections and other section of approved make confirming to IS-733 & IS-1285, fixed with dash fastener of required dia and size including necessary filling up to gaps at junctions i.e at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required included cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and the direction of Engineer In charge. (glazing, paneling and dash fasteners to be paid for separately) Anodized Almunium for fixed portion. (anodized transparent or dyed to required shade according to IS:1868 minimum anodic coating of Grade AC 15) (For shutters including providing and fixing of hinges/pivots and making provisions for fixing of fittings wherever required), including cost of EPDM rubber/neoprene gasket required (Fittings shall be paid separately). The item also includes providing/fixing of glazing in shutters with floating glass panes of 8mm thickness and with Anodized Alumunium sheet 2.5mm thick where ever required as per requirement at site and is be to be carried out as per the directions of Engineer in-charge. (All complete)

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 M in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 M and lift up to 1.50 Mtr, disposed earth to be leveled & neatly dressed: (All kinds of soil).

Trenching in ordinary soil up to depth of 60cm including removal and stacking of serviceable material and then by disposing off by spreading and neatly leveled within a lead of 50 meters and making up the trenched area to proper levels by filling with earth and earth mixed with sludge or/and manure before and after flooding trench with water.

Rough dressing of the trenched ground including breaking clods.

Supply and stacking of good earth at site including royalty and carriages complete (Earth measured in stacks will be reduced by 20% for payment).

Supply and stacking at site dump manure including carriage up to 1 Km.

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the ground.

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge.(Cost of sludge, dump manure or /and good earth to be paid separately)

Mixing of earth and sludge or manure in proportion specified or as per directions of office in-charge.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood).

Painting with synthetic enamel paint of approved brand & manufacture to give and even shade. (Two or more coats on new work). on wood work

Applying priming coat with ready mixed aluminum primer of approved brand and manufacture on resinous wood and plywood.

Painting with Aluminium paint of approved brand and manufactures to give an even shades (two or more coats on new work)

Finishing walls with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 lt/10 sqm over & including base coat of water proofing cement paint applied @ 2.20Kg/10sqm.

Providing & fixing of lighting & heating points including cutting of walls & making good the same after connecting of PVC tubes of 25mm dia of reputed and standard make for providing conduit to carry insulated copper wire of 1.5mm, 2mm & 5mm (ISI/reputed make) for lighting/heating/fan points respectively as required. The job includes cost of all fittings & fixtures, insulated wire, holders, switches, dimmers for fan points and MCBs (ISI/reputed make) of required capacity, main switch board, hylum/PVC sheets all complete & including providing and fixing of 9-11 Watt LED lights. The job is to be carried out as per the directions of site in-charge.

Lighting points.

Heating points.

Fan points including fan of 120 cm dia (Havells make).

Providing & installation of 50 Ltr Geysers (Venus/Havells make) in washroom /kitchen including C.P Tube connections, T&P charges & all sorts of carriages involved. The job is to be paid in fitted and fixed form. (Complete job).

Supply, installation, testing and commissioning of 1.5 Ton A.C (Hot & cold) of IFB make with auto stabilizer of required capacity. The job includes cost of all accessories, T&P charges, all leads & lifts and all sorts of carriages complete.

Carriage of materials from different sources up to site of work including loading, unloading and stacking complete.

Sand and Stone Agg. for an Avg. lead of 25Kms.

Bricks for an Avg. lead of 30Kms.

Stone/Stone soling from Athwajan for an Avg. lead of 20 Kms

M/S NISAR and CO.