C/O Steel Footpath on Shimla By Pass road on NH-22 (new NH 05) at km 12/500 to 13/000

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils up to all leads and lifts by all mode of transprotation on identified dumping place at Mumcipal Committee on Tara Devi Air port road, or any private dumping site out side MC Shimla area to be arranged by contractor and at his risk and cost as per technical specification clause 302.3.5 by mechanical means as per the direction of the Engineer-in-Charge. Any loss or damage of Govt. or private property during the cutting/ excavation operation shall have to be made good by the contractor.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to all level :1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) (Nominal mix) by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge asper clause 1500,1700 and 2100.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto all leads and approved dumping site by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge as per clause 202

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 80mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. grass paver block of M-50 grade with approved color design and pattern by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel . i.e. TATA ,JINDAL and branded company etc. as required:-In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Providing and fixing of steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including fabrication,hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, etc. complete (Ref: DSR 2013-Item No. 10.16.1) a Hot finished welded type tubes (TATA STRUCTUURA/JINDAL , PARKASH STEEL TUBES AND BHUSHAN INDUSTRIES) make conforming to IS:1161&YST 210 type. Tubes shall be clean, finished and reasonably free from scale. the standard size and weight of the tubes of the hollow section shall be as per IS:4923 Washers shall be specially shaped where necessary or other means use to give the nuts and heads of the bolt a satisfactory bearing,weight of the cleats, brackets packing pieces, bolts, nuts ,washers, distance pieces separators, diapharam, gusseests fish plates, etc. shall be added to the weight of the respective items including carriage by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.(TATA ,JINDAL and branded company) as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including carriage by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete including carriage by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

Supplying and fixing 10 Gauge weld mesh of size 50mm x50 mm for floor/roof slab concrete screed over the micro beams as reinforcement. The weld mesh shall be fixed as per drawing including carriage by all mode of transportation to the entire satisfaction and direction of the Engineer-In Charge.

RAJESH SHARMA