SPECIAL REPAIR TO BLDG NO P 11 SINGLE MEN BK AT 285 FD WKSP EME AND PROVN OF FALSE CEILING AND WALL PANELING IN BLDG NO P14 ADM BLOCK AT 60 INF BDE SIG COY UNDER GE WEST DELHI CANTT 10

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n. exc 1.5 sq. m each complete all as spd & directed.

All as per item No. 1 above but exc 1.5 sq. m but n exc 4 sq. m each.

S&F Factory made 35mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as spd & directed .

S&F factory made 35mm thick 2nd class hard wood glazed / gauged shutters, open, rebated prepared to receive glass , guage etc W/O sash bars for doors as specified in SSR Part I complete all as spd & directed .

S&F mild steel butt hinges 100mm size complete all as spd & directed.

S&F aluminum anodized barrel tower bolts of extruded section of size 150 mm complete all as spd & directed.

S&F aluminum handles cast type anodised of size 150 mm complete all as spd & directed.

S&F aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as spd & directed.

M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as spd & directed .

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for fdn etc for soft manhole not exc 10 sqm on plan and getting out any type of soil complete all as specified & directed.

Returning filling in soft/loose soil incl spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified & directed.

Removing of surplus soil beyond MOD land complete all as specified and as directed.

Demolition and breaking of 150 mm dia sewage/drain pipe (salt glazed where AC or reinforced concrete) set in cement mortar complete all as specified & directed.

M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete all as specified and as directed.

M&L for 75mm thick SFRC manhole/drain cover size not exc 1.00sqm each set and jonted in cement mortar 1:4 complete all as specified and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing etc complete all as specified and directed. (note : measured only aluminium part as per SSR part-1)

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/window or other frames/chowkats of size 45x70mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheet husk) and non toxic additive etc all as per SSR 2020 part 2 ser No 08100A. complete all as specified and directed

S&F Factory made single extruded WPC (W) solid decorative type flush door shutter of size 30mm thick comprising of vergin polymer of K value 58-60 (Suspension grade ), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part 2 ser No 08105C. complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spd & directed .

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as spd & directed.

Dismantling framed timber scantlings any size in section, in any position (as in purlins etc) complete all as spd & directed.

M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc complete all as specified and as directed.

S&F of Pre-painted galvalume aluminium zinc coating (150 GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as spd & directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spd & directed.

M&L for 18-20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

M&L for PVC tiles beading for external edge of tile joints of size 6.5mm to 12.5mm of hight 3.2 M of approved colour for providing round finish to tile etc complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed.

M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and directed.

All as per item No. 33 above but half brick wall

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises out of MOD land complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and directed.

M&L for 7mm thick Glazed ceramic tiles in vertical surface area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bedding/backing in CM 1:4 complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic including dismenteling of plinth protection complete all as specified and directed .

Dismantling old false ceiling board any type and removing from site complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions over and including 10mm thick rendering 1:3 on roof surface including taking down existing roof treatment any type complete all as spd and directed. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.

M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horiaontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. (Make : JOHNSON, ROCOTILES, THERMATECK.

S&F 1000 Ltr rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings after dismantling of old tank all as specified and directed.

Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed

S&F 20mm bore dia Tube medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Refixing 20mm old steel tubing and connections in new or old position (wall, ceiling, floor etc) all as specified and directed

Taking up or down 25mm bore dia steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed

S&F 25mm bore dia Tube medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Refixing 25mm old steel tubing and connections in new or old position (wall, ceiling, floor etc) all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and directed.

M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, removal of debrish beyond MOD land complete all as specified and directed .

M&L for Ready Mix plaster 15mm thick on brick or concrete surface of internal and external walls finished even and fair surface without using extra cement complete all as specified and as directed.(Note :- Height of building upto 04 storey)

M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and directed.

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified and directed .(Note :- Height of building upto 04 storey)

M&L for Preparation of new rough cast plastered surfaces of wall and applying two coats of cement based paint white or tinted ,complete all as specified and directed .

M&L for machine cut kota stone slab 20-22mm thick as in riser of stpes, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing surface and including 15mm screed bed in CM 1:6 complete all as spd & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other specifically provided for complete, removal of debrish beyond MOD land complete all as specified and directed.

M&L for providing Cement concrete 1:5:10 in filling of sunken portion type E2 using 40mm graded aggregate complete all as specified and directed..

M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work all as specified and directed.

M&L for applying evenly a tack coat of industriyal bitum 85/25 at the rate of 1.2Kg per sqm including cleaning of surface complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

S&F in repair 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete complete all as specified and directed.

S&F in repair 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wallor floor complete incl taking down old rain water pipes complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius all as specified and direction

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated Health faucet body with 1mtr ABS body pipe complete all as specified and directed.

S&F Grating doom 100mm dia of SS (Minimum weight 25gms) complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of SS. (Minimum weight 40gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.

S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and directed.

S&F in repair CP over head shower rose 125 mm dia with arm moving arrangement complete all as specified and directed.

S&F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed. (Make : CERE,KOHLER,JAQUAR

S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.(Make : CERE,KOHLER,JAQUAR

S&F in repair in repair fanct type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S/F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface complete all as specified and directed.(Make : CERE,KOHLER,JAQUAR

S&F in repair vitreous china white wash hand basin owel shape under counter complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed.(Make : CERE,KOHLER,JAQUAR

S&F in repair Vitreous China urinals, Half stall type (back or corner wall type), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing brackets, flush pipe, grating and Union for discharge pipe and waste pipe complete all as spd & directed by Engr-in-Charge.(Make : CERE,KOHLER,JAQUAR

M&L for Marble work table rubbed and polished bothe face for urinal partition /wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed. (Make : CERE,KOHLER,JAQUAR

S&F 15mm dia swan neck fancy type pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified and directed.

S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and directed.

S&F in repair coated MS drapery rod's brackets as required complete all as specified and directed complete all as specified and directed.

M&L for preparation of old treated surfaces of walls and applying two coat of oil bound distemper complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey)

M&L for preparation of old treated surfaces of walls and applying two coat of cement base paint using spray gun/roller brushes complete all as specified and directed by Engr-in-Charge (Note :- Height of building upto 04 storey)

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

M & L Preparation of new surfaces (Plastered or un-plastered) of wall two coats of distempering walls with distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying three coats of white lime wash, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified.

M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.

M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exc 40mm thick (average thickness) with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 4 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 4 storey bldgs/in floor roofs complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specificed and as directed by Engr-in-Charge.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for Pre-polished machine pressed Chequered cement concrete tiles glossy finish 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 as specified and directed by Engr-in-Charge.

S&F pre cast concrete block for kerb stoen with solid block ex 10cm in width type C1, 1:3:6 (using 20mm graded stone aggregate ) set in CM 1:6 of any shape and size. Kerb stone shall be fixed in true line and level or incurves for edging of road side path including embedding in ground to any depth as reqd.

Taking down and refixing in the same place of solar heater plate/water tank stand of any description each including necessary fittings required at site complete all as specified and directed.

S&F 25mm outer dia CPVC Ball valve/gate valve complete all as specified and directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed.

S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- (a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board

S&F of switch piano type 5 amps single pole one way complete all as specified and directed.

S&F of switch piano type 15 amps single pole one way complete all as specified and directed.

S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.

S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing after repair work, complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods,remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply & Fixing LED reading lamp, wall mounted with ‎Adjustable Arm having LED light source of 7 watts, aluminum body with powder coating finish, complete al as specfied and directed.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

Supply and fixing LED lights fitting 1x 12W (2 feet length), 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.

S & F of Fresh air ventilation fans of 250 mm sweep complete all as specified and directed

Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV,connection pipe incl all PVC & CP connections all as directed by Engr-in-Charge.

Cutting of existing water supply main any size upto 25 mm for taking branch connection of size 15 mm incl insertion of Tee unegual all as required at site or directed by Engr-in Charge.

M&L for modular AC Box with 20A SP mini MCB,Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and directed.

M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 119579.50 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

A R construction

imran construction company

JAIPAL AND BROTHERS

M/S Davinder Kumar

MRITUNJYA ASSOCIATES

HANUMAN BUILDERS

UNIQUE BUILDERS