COMPREHENSIVE MAINT TO MH AND AMC UNIT UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Dismantling of Asbestos Cement (Corrugated, semi corrugated, etc) sheets/PVC sheets or any type in roof covering, complete all as specified and as directed.

M&L for pre-painted galvatume aluminium zinc cating GI based Plain steel sheet 0.50mm thick of an colour having tensil strenght of 550Mpa as in Roof ridge, fixed with self tapping screws as specified and as directed

M&L for pre-painted galvatume aluminium zinc cating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strenght of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwa as specified and as directed

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L or J type cranked hook bolts all as specified and as directed.

M&L polycarbonated plain sheeting 10mm thickness with side lap fixed with coach screw and washer in roof, wall etc as specified and as directed.

Dismantling wall and ceiling boards’ fibre, pulp, insulations etc or insulation boards/slabs/blankets any thickness incl cover fillets and frame complete all as specified and as directed.

S & F of Providing and fixing HPSC PVC laminated one side Board 6mm thick in ceiling fixed with as per manufacturers instructions purpose, 60 X 60 cm size fixed with powder coated Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including necessary GI wire hangers 2 mm dia for securing frame work to ceiling , and also including necessary notching complete complete all as specified and directed.

Hollow PVC Wall Lining consisting of Plain colour PVC sheet inclusive of solvent cement and fixing on wall at site on PVC frame as per specifications and directed by Engr in charge.

M&L for hollow PVC Wall Lining consisting of colour PVC sheet inclusive of solvent cement and fixing on ceilingl to make frame as and fixing at site on PVC frame as per specifications and directed by Engr in charge.

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement in WPC complete all specified and directed.

Supply only integral water proof compound ISI marked.

M&L for Rendering 12 mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement complete all as specified and as directed.

M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) all as directed.

75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base, sub floor of flooring, paving, path etc surfaces finished rough to receive top layer complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60 mm thick machine pressed precast concrete rubber molded any colour interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and as directed.

All as per items no 18 but except tile all as specified and as directed.

M&L for rubber molded mat finish coloured cement concrete tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and as directed.

M&L 50 mm thick PCC 1:3:6 type C-2 as in plinth protection using (20mm graded stone agg) finished even & smooth with using extra cement including panel joint, all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete complete all as directed.

M&L Non skid coloured ceramic tiles (Ist quality) 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. Make:- Somani/Kajaria/Johnson

M&L Glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450x300x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick plaster in CM 1:4 to receive the tiles complete all as specified and directed. Make:- Somani/Kajaria/Johnson

M&L 18 to 22 mm thick machine cut kota stone slab as in flooring over and incl 15 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing complete all as specified and directed by Engr-in-charge.

M&L Virified Ceramic tiles premium quality light shade 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed. Make:- Somani/Kajaria/Johnson

M&L Virified Ceramic tiles, Premium quality light shade 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, on Vertical Surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick screed bedding layer in cement mortar 1:4 walls, finished even and rough to receive the top layer complete all as specified and directed. Make:- Somani/Kajaria/Johnson

S&F 18-20 mm thick makrana white marble work (table rubbed and polished) as in steps, jambs, cills, pillars, cooking platform and like in set cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work incl rounding of exposed edges of marble complete all as specified and directed.

M&L for pre- polished green marble as in cooking platform 16 to 18 mm thick over cement screed bed with pre griding and mirror polishing/granite polishing including making of hole for LPG pipe and chamfering the corners to the entire satisfaction of the Engr in Charge..

M&L for 20mm thick granite (of any type) work (table rubbed, polished and molded) in steps, jambs, pillars, window-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) using marble dust with admix?ture of pigment to match with shade granite.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as directed.

M&L for Brick work with fly ash sub class ‘B’ brick, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete as specified and directed.

All as per description of serial item No 32 here-in-before but except bricks complete all as specified.

M&L for Brick work withfly ash sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil emultion distemper over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of oil emultion dismper over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area not exc 1.5 sqm each and removal to store complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area exc 1.5 sqm but not exc 4.0 sqm each and removal to store complete all as specified and as directed.

Refixing of shutters including taking down of any description exc 1.00 and n exc 2 Sqm each in same opening complete all as specified and as directed.

Refixing of shutters including taking down of any description exc 2 Sqm each in same opening complete all as specified and as directed.

S&F Pressed steel door frame double rebates of size 125mm x 60mm with including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L PCC 1:3:6 type C1 using 20mm graded/crushed stone aggregate as in filling of pressed steel door frame complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated, complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I complete all as specified and as directed.

S&F 35mm thick factory made flush shutter solid core construction with block board core and plywood face panel one face is covered with decorative veneer with lipping/frame complete all as specified and as directed.

S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain, colour PVC sheet reinforced with MS square tube, suppling and fixinging opening as per specification and drawing

S & F for Galvanised mild steel wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples, all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails

M&L for 12 mm thick prelaminated particle board exterior grade,prelaminated both sides with decorative choice laminaions fixed with screw to aluminium frame, complete all as specified and directed

M&L in repairs 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and teak wood leaping all around the edges complete all as specified and as directed.

S&F 75 mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed for PVC Doors.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminum anodised barrel tower bolt 150 mm long of extructed section,ISI marked complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F aluminum anodised handle cast type 150 mm, anodised, (ISI marked) complete all as specified and directed.

S&F aluminum alloys anodised sliding door bolt with hasp, staples 300MM (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 75mm complete all as specified and directed.

Supply and fixing in repair cast iron door closer hydraulically regulated designation No 3 universal type suitable for door shutte averaging weight between 61 kg to 80 kg and fixed, complete all as specified and as directed.

S & F in repair mild steel 300mm ,ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

M&L in repair for 25 mm dia stainless steel pipe curtain rod fixed with & including SS powder coated hooks/brackets/final, shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall complete all as specified.

Dismantling wroght iron or mild steel work of any description not oterwise provide for complete all as directed.

Dismantling timber scantlings 40 sq. cm and over in section for unframed wor, in any position

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and directed.

M & L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Ditto all as per description Srl Item No 69 but one coat on old surfaces complete all as specified and as directed

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Ditto all as per description Srl Item 71 but one coat on old surfaces complete.

Hacking out old broken glass (any thickness, size qauality or description) from wooden or steel framed glazed with putty or fixed with beads complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm each panes complete all as specified.

Taking down old GI tubing and connection including fittings 15mm bore pipe complete all as specified and as directed.

Taking down old GI tubing and connection including fittings 20mm bore pipe complete all as specified and as directed.

Cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls complete all as specified and directed.

S&F 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.),complete all as specified and directed.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.),complete all as specified and directed.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated fancy type screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed.

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified. (Make : PRAYAG)

S&F in repairs plastic seat cover white for water closetfor EWC with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified. (Make : CERA / HINDWARE / PARRYWARE )

S&F in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding incl breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified. Make :- Hindware/Parryware/ Cera.

S & F 15mm Brasc CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair all a specified and directed. Make:- Jayna/ Cera/ Mark.

S & F in repair brass chromium plated jet for pedestal pattern water clost including PVC flexible pipe 600 mm long along with necessary fittings complete .

S& F in repairs WHB mixer chromium plated brass, size 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. Make:- Jayna/ Cera/ Mark.

S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed 15 mm pipe.

S& F in repairs Vitreous China wash down water closet white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device fixed complete all as specified and directed.

S& F in repairs PVC 10 litre syphonic action type flushing cistern, low level with inlet, ball valve, float and handle (ISI Marked) including brackets, flush pipe PVC 32mm bore and connection to WC complete all as specified and directed.

S&F in repair PVC connection 450mm long suitable for 15mm bore pipe n repairs including PTMT nuts complete all as specified and directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall ize 915mmx460mm with bowl size 410mm x 330mm x 160mm. complete all as specified and as directed. Make:- Nirali/ Jayna/Bluestar.

S&F in repair Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for WHB complete all as specified.

Dismantling of water tanks any type of capacity exc 500 ltrs n-exc 1000ltrs and removing to store complete

S&F 1000 ltr UV protected antimicrobial rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified and as directed. Make:-Sintex (Pure White)/ Polycon/ Sheetal

Dismantaling of water storage tanks any type of capacity exc 250 ltrsand not exc 500 ltrs and removing to store complete all as specified.

S&F 500 ltr UV protected antimicrobial rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified and as directed. Make:-Sintex (Pure White)/ Polycon/ Sheetal

S & F 20mm bore brass ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.

S&F in repair 20mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as sfd

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

S&F Powder coated aluminium (minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaske etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically herever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

5.5mm thick Sheet glass,ordinary qualityfor aluminium door/window/frame in square exc 0.5 sq. m in each pane, complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls, complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius, complete all as specified and as directed.

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified 75 mm .

M&L Reinforced concrete pipes 150 mm bore of pipe, class NP2, laid, jointed and tested with collars, complete all as specified and directed.

SANMATI UDYOG (BID ID -3076531)

M/S RAJESH CONSTRUCTION COMPANY (BID ID -3076186)

BHARAT ENTERPRISES (BID ID -3083010)