PROVN OF HARDSTANDING WITH PAVER BLOCK NEAR AL BLDG ADDN ALTN AND SPECIAL REPAIRS TO COMMAND ZENITH GYMNASIUM AND PROVN OF SECURITY WALL IN CERTAIN BLDGS AT NEW NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Surface dressing not exceeding 15 cm deep in soft and loose soils including remove the debris from MD land.

M & L broken stone & boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L Cement concrete type C-2 , 1:3:6 (40mm graded stone aggregate) 75 mm thick in flooring, all as speciifed and directed

M & L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation filling mass concrete.

M&L brick work with subclass B brick,(old size) straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclussive in the rate.)

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 complete.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer

Taking down cement or cement lime plaster on brick or stone walls, any description, including raking out joints, hacking for key, scrubbing down with water, etc including remove the debris from MD land.

M&L for cleaning existing reinforcement with wire/rotary wire brush, making the surface free from loose material dirt etc, complete applying two coats of alkaline rust converting primer (i.e. rust remover) FEOVERT conforming to ASTM-B-117, on the rebars including cleaning the reinforcement , wire brushing to remoove loose rust spalls with time interval 6 hrs between the coats and applying protective coating (IPNET - RB complete all as specified and directed

M&L for providing and applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in 1:1.5 proportion (1 part polymer and 1.5 parts Cement) on rebars after cleaning of rust scales as per manufacturers instruction (measurement on the basis of exposed concrete area). (Make : IPNET of Krishna Conchem, New Coat from Dr Fixit )

M&L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete

Sand faced cement plaster 5 mm thick as in ceiling in CM 1:3, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd ,including using richer mix for making corners if necessary, at all places and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. complete all as per specifications & as directed by the EIC

Preparing new plastered surfaces of ceiling and applying three coats of white wash

M&L udaipur green/baroda green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffits etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete (Note : The rates included the cost of cement screed bed 10 mm thick)

S & F for 12 mm thick ply wood as in vertical surface as wall pannelling with wooden planks of size 50 mm x 50 mm of second class hard wood having spacing of 600 mm C/C and fixed to wall with nails and finish the surfae with two coats of varnish polish including a coat of primer as dircted by Engr in Charge

M & L in repairs for anodised aluminium snap grid frame work for false ceiling with and including 12 mm thick gypsum boards (size of grid 605mmx605mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete and finally finished the ceiling with two coats of oil bound distemper over a coat of white wash all as specified and directed

M&L machine cut kota stone slab 20 to 25mm thick in treads in window cill (provided in two layers with overlap) & length will be as per the length of windows) over and including 15 mm thick cement screed base in cm 1:3 laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing and moulding all as directed by Engr-in-Charge (Note : Rate of Cement screed bed is included in the rate )

S&F Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc complete all as specified & directed. Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .

S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102

S&F 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

M&L Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as directed.

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster )

M&L rendering 15 mm thick in CM (1:6) on wall finished even and smooth without using extra cement

M&L applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer with chalk whiting on new plasterd surfaces of wall after necessary preparation of surface complete all as specified.

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40 mm thk in flooring, all as speciifed and directed

M & L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F 12 mm dia 100 mm long dash through fasterners bolts fixed in concrete work to hold grills/brackets etc complete

M & L preparation of newly steel surfaces , over 10cm in width or grith, not otherwise described two coats of synthetic enamel paint priming with red oxide

M&L Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete masonry walls, finished even and fair without using extra cement complete all as specified and directed. Including taking down old cement plastering including remove the debries from MD land.

Preparing new or old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening with wall putty complete.

sri ram construction

Unitech Enterprises

Balaji Construction

BOB ENTERPRISES

ASHOK CONSTRUCTION

MADHU ENTERPRIZES

SAHU AND SAHU CO.

M/s. MAYUR ENTERPRISES

satguruenterprises