Repairing arresting of steering play and Jerk of Dumper Sl.no. 2328 (D-11953) and repairing Jerk arresting of A-frame ( Pivot Pin) bearing housing and steering play of Dumper Sl.no. 2356 (D12136) on the basis of labour and machining charges.

Amount

A. SCOPE OF WORK FOR DUMPER SR. NO. 2328 A.1. Removal/opening of two nos steering link , two nos. Steering cylinder and one no centre steering link from machine. A.2. For repair of two nos. Steering cylinder and Two Steering link - Opening of both end ball stud. A.3. For repair of two nos. Steering cylinder and Two Steering link - Welding of ball stud housing to make actual size of ball stud. A.4. For repair of two nos. Steering cylinder and Two Steering link - Machining of welded portion for ball stud size A.5. For repair of two nos. Steering cylinder and Two Steering link - Both end ball stud and cap fitting (Ball stud and cap provided departmentally) A.6. For repair of centre link - Welding of all three oval oval hole of Centre link of making size of new and stud and centre link. A.7. For repair of centre link - Machining of all three welded hole for size of ball stud and pin A.8. Fitting of all repaired 02 nos. Steering link , 02 nos. steering cylinder and 01 no. centre arm to machine A.9. Co-Axial Boring of 08 nos. ball stud /bush housing of bell cranck and tie rod and sterring cylinder ( On Chassis portion.)

B. SCOPE OF WORK FOR DUMPER SR. NO. 2356 B.1. FOR REPAIRING OF PIVOT PIN - Removal of accessories like Hoses, Slack Adjuster, tube, Hoist valve, around pivot pin. B.2. FOR REPAIRING OF PIVOT PIN - Diesel tank removal. B.3. FOR REPAIRING OF PIVOT PIN - Rear suspension (Both) lower pin removal for A frame support. B.4. FOR REPAIRING OF PIVOT PIN - Removal of Pivot Pin. B.5. FOR REPAIRING OF PIVOT PIN - Welding of Pivot pin housing for horizontal line boring ( ID-20CM , L-10CM) B.6. FOR REPAIRING OF PIVOT PIN - Welding of both collar and line boring (ID-12.5 CM & L-9.5 CM). B.7. FOR REPAIRING OF PIVOT PIN - Grinding 16 Nos. hole for fitting of plate( Bearing support). B.8. FOR REPAIRING OF PIVOT PIN - Spherical Bearing fitting (Provided by Departmentally) in pivot pin housing. B.9. FOR REPAIRING OF PIVOT PIN - Fitting of A frame. B.10. FOR REPAIRING OF PIVOT PIN - Re-fitting of all removal accessories. B.11. FOR REPAIRING OF PIVOT PIN - Fitting of Diesel tank Assly. B.12. FOR REPAIRING OF PIVOT PIN - Fitting of both rear side suspension lower pin. B.13. FOR REPAIRING OF PIVOT PIN - Machine starting and testing. B.14. FOR REPAIRING OF STEERING PLAY - Removal/opening of two nos steering link , two nos. Steering cylinder and one no centre steering link from machine. B.15. FOR REPAIRING OF STEERING PLAY - Opening of both end ball stud. B.16. FOR REPAIRING OF STEERING PLAY - Welding of ball stud housing to make actual size of ball stud. B.17. FOR REPAIRING OF STEERING PLAY - Machining of welded portion for ball stud size B.18. FOR REPAIRING OF STEERING PLAY - Both end ball stud and cap fitting (Ball stud and cap provided departmentally) B.19. FOR REPAIRING OF STEERING PLAY - Welding of all three oval oval hole of Centre link of making size of new and stud and centre link. B.20. FOR REPAIRING OF STEERING PLAY - Machining of all three welded hole for sixe of ball stud and pin B.21. FOR REPAIRING OF STEERING PLAY - Fitting of all repaired 02 nos. Steering link , 02 nos. steering cylinder and 01 no. centre arm to machine. B.22. FOR REPAIRING OF STEERING PLAY - Co-Axial Boring of 08 nos . Ball stud /bush housing of bell cranck and tie rod and sterring cylinder( On Chassis portion.)

Machining charges for scope of work (A.4, A.7, B.17 & B.20)

Grinding Charges for scope of work B.7

Coaxial Boring charges for scope of work (A.9, B.5, B.6 & B.22)

Labour charges for scope of work (A-1,2,3,5,6,8 & B-1,2,3,4,8,9,10,11,12,13,14,15,16,18,19,21) (consisting of skilled fitter, welder, unskilled)

Contractor Profit

Total impact of GST for the purpose of CTC

NIRBHAY SALES AND SUPPLY AGENCY

New Diamond Engineering Services

SHASHI ENGINEERING WORKS

M/S R.K. ENTERPRISES