RENOVATION OF TOILETS OF YAMUNA AND GANGA BLOCK AT KV MEG UNDER GE NORTH BANGALORE

Amount

Demolition of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden /Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooring etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of tile exceeding 0.18 sqm but not exceeding 0.38 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Vitrified Ceramic tiles double charged (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 10 above but as in skirting / dado incl past with adhesive over 10 mm thick rendaring in CM 1:4 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 7 to 8 mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10 mm thick plaster in CM 1:4 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Vitrified Ceramic tiles heavy duty hard stone coloured tiles of 16 mm thick area of each tiles exceeding 0.36 sqm but not exceeding 1.00 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures to be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg / sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (v) Cement concrete 1:5:10 type E-2 using 20mm granded brick aggregate as in sunken portion of WC Note: Plan area will be measured for payment.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

Supply only water proofing compound (Liquid) complete all as specified and as directed.

M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutter, window and ventilator shutters, fixed / Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete shall as specified and as directed

S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F 5.50 mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M & L 12 mm thick Veneered particle board, solid core, interior grade, with decorative face veneers both face all as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed

S&F aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixeing clips of sheet, cast or extruded section and fixing botls and sliding both of extruded sections of cast alu alloy 300 mm long all as specified and directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F in repairs EWC single piece floor mounted with flush tank (snow white) including with normal closing seat cover of size 640X350X720 mm complete set with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no S1013208 S-220 of Cera or equivalent make of CA)

S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag of equlavent make of CA) complete all as specified and as directed

S&F in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of lime concrete.

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs granite counter vitreous china wash basin snow white, oval bowl type, size 450 x 350mm x 150 mm including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long and waste pipe, including 20 mm thick granite top for WHB complete all as specified and directed. Make: Cera cat No S2030102 or equivalent make as per CA.

S&F in repairs Viterous China urinals,wall mounted wit in built sensor flushing of size 370x390x610 mm including complete Sensor type facilities Hindware cat no SKU 60018 beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs Viterous China premium Female urinal pot floor mounted of size 470 x 350 x 100 mm (14"x17"x4" inches) of make Cera cat No S4040101 or Hinduware, Parrywere or equavalent incl beddings urinal against floor in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs PVC deo flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equivalent make of CA)

S&F PVC water connection 600mm long 15mm dia complete all as specified.

S & F in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No 6850 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm pillar taps tall body chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6803 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 of Prayag or equivalent make as specified in CA)

S & F in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No 6810 Marcus series of Prayag or equivalent make as specified in CA)

S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S & F chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make as specified in CA)

S & F chromium plated bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6806 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA)

S & F in repairs Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified in CA)

S&F in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified in CA)

S&F in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.

S&F in repairs Towel rack of Stainless steel incl fixing arrangement etc complete all as specified and as directed (Make Cat no SS-1 of Prayag of equlavent make of CA)

S & F in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

S&F in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-191A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F in repairs Unbreakable corner shelf (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F in repairs Toilet paper holder (Cat No BA-18 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl cutting through brick/stone/concrete wall for inserting pipe line concelled type etc incl taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs 75 mm dia of PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in trenches or in floor etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint fixed on walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in trenches or in floors incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint fixed on walls incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 75 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 110 mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

S&F 75mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

S&F 110 mm dia bore PVC (SWR) vent cowls

S&F 75 mm dia bore PVC (SWR) vent cowls

Complete removal exising treatment (External / Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer all as specified.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

All as per item no 92 above, but on old Plastered surface of wall

M&L Preparing new previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint or requrired shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.00Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

S&F in repairs 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE)

S&F in repairs 7 to 8 mm Hollow Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall cladding / Vertical surface and fixing at site incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE)

S&F in repairs stainless steel curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod) including Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete.

S&F in repairs 15 mm dia Chromium plated concussive push button taps, screwed for iron pipe and fixed

S&F in repairs 15 mm dia stop valves, but fancy type, chromium plated with long shank and cup (concealed type, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixedtaps, screwed for iron pipe and fixed

M/S POTHIRAJ AND CO (BID ID -3285905)

PRACHANIVA CONSTRUCTIONS (BID ID -3288831)