SPL REPAIRS TO ROOF TREATMENT IN BLDG NO P12 ABOVE 5TH FLOOR AT DICKENSON ROAD AND OTHER SANCTIONED WORKS UNDER GE SOUTH BANGALORE

Amount

Excavation in post holes (for similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubbed mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in soft/loose soil.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in posts,pillars etc all as directed.

S&F for ms work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1998 grade St.-240 all as specified and as directed.

S&F for roof trusses (framed) purlins , framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc., complete usingFe 410-W (Gde -E-25 Quality A) all as specified and as directed.

M&L preparing new steel surfaces of any description and apply one coat of red oxide zinc chrome and applying two coat of synthetic enamel paint.

S & F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of an having.colour on exterior side tensile strength of 550MPA as in roof covering/cladding to walls fxied with self tapping screws as specified and conforming to all as specified and directed.

Surface excavation n. exe 30 cm deep and averaging 15 cm deep and getting out fdn in soft/loose soil all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in posts,pillars etc all as directed.

M&L for 75mm thick hardcore broken stone boulders of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered & rammed to a true surface complete all as specified and as directed .

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B-1 ( 20 mm graded stone aggregate) as in flooring incl spike rolling to surfaces or making impressions of expanded metal, whilst the concrete green complete all as specified and directed.

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar 1:6 complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished the surfaces even and smooth (without using extra cement) all as specified and directed.

S&F coloured Glazed ceramic tile in vertical surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM(1:4) as backing coat for tiles complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Removing excavated materials exc 200 mtr but not exc 250 mtr and depositing where directed at a level n . exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of terrace floor tiles including PCC padding n'exc 15 cm thickness and removing rubbish off premises out side of MD Land any where complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L for providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete 1:4 complete all as specified and directed.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in padding concrete on roof top complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with integral water proofing compound (WPC) 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and directed .

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed .

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish , 3mm thick and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

S & F GI pipe 25 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor including taking down unserviceble GI tubing complete all as specified and directed.

S & F GI pipe 20 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor including taking down unserviceble GI tubing all as specified and directed

S & F GI pipe 15 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor concealed type including taking down unserviceble GI tubing all as specified and directed

Taking down PVC pipes (any size or pattern), including all fittings, heads, shoes, bends swan-necks etc, (measured over all as fixed along the centre line over fittings and accessories) .

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed in walls or in floors complete all as specified & directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. incl brushing neat cement slurry with 3kg of cement per sqm all as specified and as directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

S&F glazed ceramic coloured tiles 7 to 8 mm thick 300x200x7 in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc complete all as specified and directed.

M&L for preparation of newly / old plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparing newly/old plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out existing broken glass complete all as specified and directed.

S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down unserviceble item complete all as specified in SSR part-I and as directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified & directed .

S&F 20 mm bore gun-,metal, globe or gate valves, with irion wheel head, screwed for iron pipe or brass ferrule and fixed.all as specified and directed .

S&F 75mm size PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic seat cover, black colour, flat bottom with mild steel chromium plated or aluminium hinginng device including PVC flush pipe 32mm to pedestal pan incl all joints, connection to drain pipe and flush pipe complete all as specified and directed.

S&F in repair PVC flushing cistern low level of 10 ltr capacity ,white ,with inlet ball valve ,float and handle including brackets. etc complete all as specified and as directed .

S&F in repair vitreous china white wash hand basin flat back size 550x400 mm including brackets chain & plug and with waste pipe waste coupling etc complete all as specified and as directed.

S&F in repair 15 mm bore two way bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 100 mm bore CI Pipes (SWR) pipes with spigot & and socket ends centrifugally cast Class A in any length laid in trenches or in floors complete all as specified & directed .

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door all as specified and directed .

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed

M&L preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed .

Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed .

Excavatoin over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed .

S&F 150 mm bore salt-glazed stoneware drain pipes laid in trenches and joints including breaking up of existing SWG pipe complete all as specified and directed .

Concrete bed 1:4:8 type D-2 (using 40 mm graded stone aggregate) to 150 mm bore drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavted materials exc. 250 m and n exc 500m and depositing where directed at a level n'exc 1.5 m above the starting point complete all as specified & directed

Dismantling floor hearth or wall tiling including cement mortar bedding , removing rubbish off premises outside (MD Land) complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&Fdark shade/double charged/ultra charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

S&F coloured glazed ceramic tile in verticle surfaces 300 x 600 mm thick set and jointed in neat cement slurry andpointed in white or colour cement to match.including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles complete all as specified and as directed

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm all as specified & directed

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm complete all as specified and directed

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gaund ze, etc., with edges of sash bars,and framing moulded, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) complete all as specified and directed .

S&F 35 mm thick factory made 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated complete all as specified and directed

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings.all as specified & directed

S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as directed.

S&F stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 100 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed .

S&F 125 mm long butt hinges, cast brass with mild steel hinge pin bright polished and fixed type B-12 complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts and extrude section and fixed complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed complete all as specified and directed

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F in repair brass 4 levers mortice lock, vertical type, size 100mm complete all as specified and directed. Make: Godrej

S&F 150 mm long floor door stopper of brass body and tonguewith hard drawn steel spring fixed in floor all as specified and directed

S&F 150 mm long extruded brass handles, fabricated type polished all as specified and directed

S&F 300 mm long brass, approved design rat tail rod pattern springs, incl roller and roller plate complete all as specified.

S&F in repair block boards, 19 mm thick, grade 1 quality, exterior grade, decorative face, veneered on both faces, fixed with screw to timber frame work and including external teak wood lipping 6mm thick , fixed with nails for kitchen cupboard complete all as specified.

S&F in repair 2nd class hard wood plain fillets, square, rectangular or trinagular in section, clean sawn, secured with nails or brads, sectional area exc 13 sqcm but n.exc 25 sqcm complete all as specified and directed.

S&F 30 mm wide of flap, continuous (piano) hinges, mild steel bright finished or electo galvanised complete all as specified and directed.

S&F 150 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 40 mm dia cub board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as as specified and directed.

M&L for granite (of any type) tiles 40 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing for kitchen platform over 20mm thick screed bed (1:6) complete all as specified and directed

M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete with 10mm thick backing coat in cement mortar 1;4 complete all as specified and directed.

S&F in repairs stainless steel kitchen sink 1.00mm thick with plugs, washers and waste pipes and cast iron cantilever brakets including and connecting union to pipe over all size 495mm X 420 mm bowl size 410mm X 330mm X 160mm complete all as specified and directed

S&F in repair Stainless Steel Plate rack of size 95 x 85 cm complete all as specified and directed.

S&F in repiar stainless steel sink cock ( table mounted) with angular knob complete all as specified and as directed Make: Jaquar cat no FLR-5359N

M&L preparation of old plastered surfaces of ceiling incl removing nails, making good holes & cracks etc by filling wall care putty and applying one coat of oil bound distemper complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying two coats of whtie wash all as specified and directed

M&L for complete removal of existing treatment from the surfaces of walls including removing of nails, making good holes & cracks etc by filling wall care putty and applying two coats of plastic emulsion paint over a coat of primer over a coat of 2 mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

S & F in repair washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 300 mm complete all as specified and as direced.

Supply and fix PVC (SWR) bends for 110 mm bore pipes complete all as specified and directed.

S&F in repair 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed

S&F in repair 100 mm dia PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and as directed

S&F in repair Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (min wt 190 gms) complete all as specified and as directed

S&F glazed aluminium anodized (15 micron) sliding window with three track, all section will be 90x30mm and 2.6mm thick complete with suitable aluminium anodized handle, cleat, glazing clips, 5.5mm thick glass sheet with neoprene dry set rubber gasket complete all as specified and as directed.

S&F power coated aluminium deco grill of approved size and design suitable for sliding window complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified.and directed

S&F in repair stainless steel soap dish approximate size 160x160x90 mm embedded in the wall complete all as specified and as sample and as directed

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium/copper point wiring for light, fan, socket 5 Amps and 15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc. complete all as specified and as directed.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS) including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for one light/CB point controlled by one switches complete all as specified and directed.

All as per item No. 107 here-in-before but for one ceiling fan point controlled by one switch.

All as per item No. 107 here-in-before but for one 3 pin 5Amps socket out let point on independent board.

All as per item No. 107 here-in-before but for one 3 pin 5Amps socket out let point on the same board with other switches.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with accessories including necessary modular metal fush box and modular white cover plate for fixing switches, fan regulators and making good disturbed surfaces in CM 1:3 for one light/CB point by one switch, complete all as specified and directed.

All as per item No. 111 here-in-before but for one ceiling/exhaust fan point controlled by one switch.

All as per item No. 111 here-in-before but for one 3/2 pin 5Amps socket out let point on independent board.

All as per item No. 111 here-in-before but for one 3/2 pin 5Amps socket out let point on the same board with other switches.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 2.5 Sqmm, 1100 volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with accessories including necessary modular metal fush box and modular white cover plate for fixing switches, fan regulators and making good disturbed surfaces in CM 1:3 for 15/16 Amps socket outlet point, complete all as specified and directed.

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and directed.

s&F switch socket combination 2in1, 3pin,5A flush type universal complete all as specified and directed.

S&F switch socket out let 2in1, 3pin, 5 Amp complete all as specified and directed.

S&F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

S&F modular switch 1 way, 6A 1 module complete all as specified and directed.

S&F modular switch 1 way, 16A 1 module complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator 120W, 2 module complete all as specified and directed.

S&F bell push flush type, 5 Amps complete all as specified and directed.

S&F call bell AC 230 volts, single pole complete all as specified and directed.

S&F step type electronic fan regulator flush type 230 volt AC complete all as specified and directed.

S&F MCB SPN 6 to 32 Amps, 240 volts, complete all as specified and directed.

S&F MCB TPN 40 to 63 Amps, 415 volts complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 volts complete all as specified and directed.

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral single door, 2 way, 240 Volts, without busbar including taking down old unserviceable one complete all as specified and directed.

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 8 way, 240 Volts, including taking down old unserviceable one complete all as specified and directed.

Supply and fix MCB, DB double door type, made out of CRCA mild steel sheet surface mounting, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including including taking down old unserviceable one complete all as specified and directed. complete all as specified and as directed.

Material and labour for sub main wiring concealed type with four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and two run of 6 Sqmm PVC insulated multi stranded copper conductor cable for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Four runs of 6 Sqmm cable and two run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S&F LED batten, suitable for indoor applications 20W 4' length housing in extruded aluminium natural anodised finish with end cap made up of ABS plastic with white colour finish and high efficiency trnslucence (HET) difusser and integrated electronic driver of operating 2 point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper cable of suitable size including taking down existing unserviceble tube light fittings complete all as specified and as diretcted. Make :- C&S Cat part No LTTB4F20WLED/W or equivalent in Havells/Bajaj.

S&F LED batten, suitable for indoor applications 10W 2' length polycarbonate housing with end cap made up of ABS plastic with white colour finish and high efficiency translucence (HET) difusser and integrated electronic driver including 2 point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper cable of suitable size including taking down existing unserviceble tube light/CFL fittings complete all as specified and as diretcted. Make :- C&S Cat part No LTTB2F10WLEDS/W or equivalent in Havells/Bajaj.

Material and labour for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 (with 20mm graded stone aggregate),chamber and 50mm thick precast RCC (1:2:4) cover slab re-inforced with XPM Jalli including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

S&F storage type electric water heater of 25 Ltrs capacity, BEE 5 star rated, 240V rated input 2KW PUF insulated fitted with stainless steel container and copper coil, max working head of water 60mtrs fixed to wall with suitable MS tower/anchor bolts,inlet/outlet pipe, grouted to wall complete all as specified and as directed. Make :- Bajaj Model Shakti GPV Product code 150747 or equivalent make in Crompton/Havells

Suresh painters