MPLADS 2025-26 Minimast light

Amount

Earthing as per P.W.D standard with an earth electrode of 2 mtrs class ‘B’ GI pipe of dia not less than 32 mm complete with necessary masonry work (SD NO: 234)

Supply and laying of 4 x 16 Sq.mm PVC armoured LTUG cable in a trench to be excavated at layer of gravel and covering the cable completely and refilling the earth to make good.(SD221+ EW +Refilling )361+

Supplying 4 core of 6 Sq.mm Pvc sheathed cable having multi strand water proof copper cable inside the tubular pole for connecting the electrical supply from the basement cable to the top of the street light fitting including all inter connection lead, lift etc., complete. (SD No : 52)

Supply and run of 2 of 6.0 Sq.mm (84/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade on 7/20 GI bearer wire for service connection Main.(SD .No : 66)

Supply and run of 2 of 6.0 Sq .mm (84 / 0.3) PVC insulated sc unsheathed Cu. conductor of 1100 v grade in 25mm dia GI pipe (Class B) bent at both ends with necessary angle Iron upright and end supports for Mains.(SD No : 71)

Supply and fixing of automatic switch Timer - d0 - (Excluding 60w Bulb, M.S. Metal box, Earth work excavation, Labour charges for erection of the MS Box set)

Supply and fixing of automatic switch for road lighting with automatically ON and OFF for evening 6.00.PM. to 6.00.AM with 32 AMPS Double Pole isolator, 15 amps SP Switch, 63 amps Fuse unit, Neutral link, 60w Bulb and holder with copper Earth plate with 2” dia GI pipe pedestal with a M.S Metal box of size 36” x 24” x 15” to house the above items with concreting with cement morter for the pedal pipes. lead lift etc., complete.

Supply and Delivery of 12 mtr hight Mini Mast Octagonal MonckyLadder Type, ( Manual ) Mini Mast shaft shall be in two section fully hot dip galavanized and should with stand wind velocity of 160km per hour the mast should including head frame suitable for 6 nos luminaries.Bottom Dia : 180 A/F,Top Dia: 90 A/F, Thickness : 3mm, Base plate : 400 X 400 X16mm, Foundation Bolt : M20 X 750mm X 4.Nos

Supply and fixing foundation Bolts (8 Nos) Length of bolt---1000mm, Diameter of Bolt--M24 Dia

Supply and fixing Lighting Arrestor. The typical lightning arrester has a high-voltage terminal and a ground terminal.

Supply and fixing of LED 150W Higher End Crompton,Havells etc.,. white LED Street Light fitting casting water proof doom with low voltage power savings with long time high resolution luminance, lead, left etc., complete.

Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B).

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30

RCC 1:1½:3 mix using 20mm ISS HBG metal from approved quarry including cost and conveyance of all materials to site including cost of cement and handling charges for the same and both ends and including labour charges for mixing, watering, curing and compacting concrete excluding centering charges and steel etc., complete ass per the standard specification.

Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Paving the floor with Granite slabs (superfine polished with machine cut edges of 18-20 mm thick) of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three M- Sand) 20mm thick and pomted with same coloured cement neatly etc., complete.

PINNACLE INDIA TRADERS (BID ID -1395442)