Providing Play Materials ,footpath and Improvement works to elango nagar park at ward no.7 East Zone.

Amount

Earth work excavation in all soils with initial lead and lift etc. complete as per direction of departmental officers

Plain cement concrete in 1:4:8 mix using 40mm HBG Metal from approved Quarry etc complete

Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Filling with Quarry Rubbish including watering and consolidation layer by layer with all incidental charges etc complete

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Supply and Fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6 mm M.S. Flats and M.S. sheet 18g with necessary locking arrangements including one coat of Red oxide paint (0.60 x 1.85m)

Providing of galvanised iron sheets complete direction as per the departmental officers

Flooring with bed of cement concrete 1:2:4 (One part of cement, two parts of sand and four parts of stone jelly by volume) using 20 mm thick granite hard broken stones, all machine mixed, laid to uniform thickness of 100mm and top left rought to receive floor finish including all labour charges for concreting, ramming, curing etc, and providing expansion joints, slopes & grades if any etc., complete complying with relevant standard specifications at all leads & lifts inside the building.

Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG, and side rails for child to hold while. Climbing is made of 75mm x 25mm thick 14 SWG to a length of 4.50m for both sides. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of U-model twin sea saw four seater using 65mm dia M.S.pipe of 3mm thick to a length of 4.90m and supported assembly bars using 50mm dia M.S.pipe of 3mm to a length of 2.10 m each for 2 Nos. The four seater of circular type of 250mm dia S.S sheet of 16 SWG. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and Fixing of Two seater swing using 3m long 65mm dia M.S.pipe of 3mm thick. The Slide supports are 3m long 50mm dia M.S pipe of 3mm thick. The 3 way sockets using 3mm M.S.plate and grip the entire unit rigidly. Two swing clamp with ‘U’ and ‘S’ hooks are provided to the swing seat made out of 25 x 25 mm S.S square tube of 14 SWG with stain less steel plates of a grade 304 and size of 500mm x 250mm of 16 SWG and hooks are fitted with 8mm thick tested chain 2 Nos of length 9.80M. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work.

Plastering in Cement Mortar 1:5 mix 12mm thick

Painting with enamel paint two coats for doors, windows, grills, weldmesh etc

Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) SD- 16

Wiring with 2x1.5sq.mm PVC insulated unsheathed Conductor of 1100Vgrade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box foe 5A 3pin non inter locking CS plug with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for opening PVC plug point

Supply and fixing of box type 4 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC un sheathed copper leads from terminals to the fitting

Supply and fixing of 40W street light fititng complete direction as per the departmental officers

Supply and fixing of 3 core 6sqmm aluminium flat cable for street light fititng complete direction as per the departmental officers

Add :- GST @ 18%

PNAT CONSTRUCTIONS (BID ID -1543584)