REPAIR REWIRING AT CEILING FAN EXHAUST FAN WALL MOUNT FAN FRESH AIR FAN PEDESTAL FAN AND GEYSERS FOR MD OTM SCCN AT NAVAL STATION KARANJA

Amount

Taking down disconnecting and dismantling of ceiling fans including fan blades, down rod, coupling, decorative caps, condenser housing, stator and rotor for inspection and replacement of defective parts complete all as specified including complete overhaulings/greasing reassembling and testing to achieve satisfactory perfomance, refixing after repair complete all as specified and directed by Engineer-in-Charge for the following stated below as (a)&(b) :- Notes :- (a) Spare parts required shall be measured and paid separately as supply only under relevant items of this Schedule hereinafter. (b) Painting shall be measured and paid separately (c) Material required for overhauling such as grease, oil, etc shall deemed to be included in rate quoted. Ceiling fan of sweep 1200 mm

Complete all as per item No 1.00 above but exhaust fan of size 300 to 450 mm sweep

Complete all as per item No 1.00 above but air circulator wall mounted/ pedestal fan of 400 mm to 600 mm sweep

Supply only Ball bearing 6201

Supply only Ball bearing 6202

Supply only Capacitor (ISI marked) 2.5 mfd. Make : M/s Asian / M/s Crompton Greaves / M/s Usha / Havells

Supply only Canopy with fixing screw. Make : M/s Bajaj / M/s Crompton Greaves / M/s Usha

Supply only Ceiling fan blade (set of three) 1200 mm (48") sweep, suitable for M/s Crompton Greaves / M/s Orient / M/s Usha etc

Supply only Rubber bush for capacitor all as specified and directed by Engr-in-Charge.

Supply only Split pin all as specified and directed by Engr-in-Charge.

Supply only Rubber reelall as specified and directed by Engr-in-Charge.

Supply only Shackle for ceiling fan with nut and bolts all as specified and directed by Engr-in-Charge.

Supply only Capacitor (ISI marked) 3.20 mfd

Supply only Ball bearing 6203

Supply only Louver shutter of exhaust fan 300 mm sweep made of 16 gauge all as directed by Engineer in Charge

Ditto, all as per item No 15.00 above, but 350 mm sweep

Ditto, all as per item No 15.00 above, but 450 mm sweep

Ditto, all as per item No 15.00 above, but 250 mm sweep

Supply only Ball bearing 6204 NBC

Supply only Capacitor (ISI marked) 4 mfd. Make : M/s Asian / M/s Crompton Greaves / M/s Usha / M/s EFCOS

Supply and Fix in repairs 'U' clamp for hanging ceiling fan in ceiling to be fixed with 3" long anchor fastener 3 Nos for each clamps complete all as specified and directed by Engr-in-Charge [Make: As approved for existing].

Supply and Fix in repairs PVC insulated multistranded Copper conductor, sheated round cable ISI marked 1.0 sqmm x 2 core complete all as specified and directed by Engr-in-Charge. [Make : Finolex/ Havells/Paragon]

Material and Labour for preparation of old painted steel surfaces thoroughly and removing paint by hand scrapper to receive one coat of red oxide zinc chrome primer and two coats with deco white synthetic enamel paint by spraying including numbering of MES No with max 7.5 mm size letter with black pfu paint complete all as specified for Ceiling Fan 1200 mm / 1400 mm sweep

Complete all as per item No 23.00 above but Exhaust Fan 300 mm to 450 sweep

Complete all as per item No 23.00 above but Pedstal/wall mounted Fan 400mm to 600mm

Material and Labour for copper rewinding of ceiling fan, with super enamelled copper wire of existing size and specifications, replacement of bearing/bush, testing , fixing at site complete all as specified and directed by Engr-in-Charge for Ceiling Fan 1200 mm sweep. Note :- Rewinding of fans to be done at MES store yard by opening small rewinding workshop, providing rewinding machine etc.

Complete all as per item No 26.00 above but Exhaust fan 300 mm

Complete all as per item No 26.00 above but Exhaust fan 450 mm

Complete all as item No 26.00 above but wall mounted Fan 400 mm to 600 mm

Supply and Fix in repair down rod approximate height of 3 feet long connected to ceiling to ceiling fan complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair down rod for 1200 mm ceiling fan connected to ceiling to ceiling fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair fan regulator step type 230v either socket type or switch type as per the requirement of site and complete all as specified and directed by Engr-in-charge.

Taking down carefully old geysers 25 litres capacity of any make including dismantling and fixing of following part under item No 34 to 41 and refixing the geysers in the position after testing complete all as specified and directed by Engr-in-Charge. The unit rate quoted shall be inclusive of fixing of spare parts and supply only sparts shall be measured and paid separately under relevant items of this schedule. NOTE FOR ITEM NO 34 to 41 :- The make of spare part shall be as per sample directed by Engr-in-charge.

Supply only Heating element 2 KW suitable for operation on 230 V, AC, 50 Hz

Supply only Thermostat for 25 liters capacity Geyser

Supply only Thermo cut out for 25 Liters capacity Geyser

Supply only Red/Green indicator, 230 Volts (round/square) as required at site.

Supply only Gasket set for 25 liters capacity Geyser

Supply only PVC flexible connection for inlet for (cold water) with its connecting accessories (brass couplings), 0.60 m long, 15 mm dia, heavy duty (ISI marked)

Supply only metallic flexible connection for outlet (hot water pipe) with its connecting accessories (brass couplings), 0.60 m long, 15 mm dia, heavy duty (ISI marked)

Supply only Pressure release valve dead weight type for 25 liters capacity Geyser

Dismantling of geyser taking out copper tank transporting to welding shop soldering of leakage portion of tank and transporting to site, reassembling the geyser after filling of glass wool and connection complete all as specified and directed for the 25/50 ltr capacity geyser

Supply and Fix in repairs / replacement earth plug and socket pole, neutral, sheet metal enclosures with a two pin, plug and socket 20 Amp, 240 volts with and including one MCB, SP, 20A, 240 volts complete all as specified and directed by Engr-in-Charge.

Material and Labour for Testing the tamper proof electric, KWH meter, disconnecting of outgoing supply of residence, checking the elect meter by applying artificial load, making the record in register, resealing the meter properly, including replacing the damaged terminals, obtaining user signature on register for proper testing, Sealing of Electric Meter in presence of MES rep and Users, repainting of MES Number on Energy meters in Navy Nagar, NAD colony & Bazar area private party, maintenance of Register as per direction of Engr-in-Charge complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through PVC casing caping/existing conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, electrical fittings etc, removing and making good disturbed surfaces of walls/ceiling etc, all as specified and directed by Engr-in-Charge.

Material and Labour Point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLSH insulated unsheathed stranded copper conductor cable using color code drawn through & including PVC, casing caping with all accessories complete all as specified in and including sunk type pressed steel/CI terminal box with 3mm thick hylam Mansonite sheet top cover / PVC Board including 1.5 sqmm PVC insulated FRLSH unsheathed copper conductor cable for continuous earth conductor (using green colour) to commen earth and connecting to earth dolly for One light / fan / call bell point controlled by one switch

Complete all as per item No 46.00 above but One 5 pin socket outlet 5 Amps on independent board

Complete all as per item No 46.00 above but One 5 pin socket outlet 5 Amps on same board

Complete all as per item No 46.00 above but One light point controlled by two way switch

All as per item No 46.00 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLS PVC 2.5 sqmm multi standard insulated unsheathed copper wire for continuous earth on independent board.

Supply and fixing switch piano type flush button type single pole one way 5 Amps 240V front operated complete all as specified and directed by Engr-in-Charge.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 A and 15 Amp flush type universal complete all as specified and directed by Engr-in-Charge.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 A flush type complete all as specified and directed by Engr-in-Charge.

Supply and Fix Switch socket 3 pin 5 A flush type complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell buzzer 240v 50hz complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell push 240v 50 hz complete all as specified and directed by Engr-in-Charge.

Supply and Fix ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed by Engr-in-Charge.

Supply and Fix Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Electronic fan regulator step type electronic fan regulator flush type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair switch piano type flush button type single pole one way 5 Amps 240V front operated including taking down of existing switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair socket outlet 3 pin 5 A flush type including taking down of existing switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Switch socket combination 2 in 1, 3 pin, 5 A and 15Amp flush type universal including taking down of existing switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Switch socket combination 2 in 1, 3 pin 5 A flush type including taking down of existing switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair Bell buzzer 240V 50Hz, including taking down existing bell complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell push 240V 50Hz, including taking down existing bell push complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED batten with 22/24 LED (Four feet) tube light in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc. Surface and wall mounted LED batten, Engineering plastic batten including dismantling of existing tube light as directed and specified by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door open-able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair double door MCB DB TPN 4 way made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, with thimble flame retardant copper conductors and 200 Amps rated bus bar double door open-able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair MCB TPN 40 to 100A with breaking capacity 16KA, 240V, 50 HZ Ac complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair 6 to 32 AMP MCB single pole 240V 10 KA (C-Series) complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair MCB SPN 240 volts AC 40 to 63Amps (C-series) as per requirement of AMP as specified and directed by Engr-in-charge.

Supply and fix in repair 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed by Engr-in-Charge.

Supply and Fix MCB SPN 240 volts AC 40 to 63Amps (C-series) as per requirement of AMP including taking down as specified and directed by Engr-in-charge.

Material and Labour for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into surface/concealed PVC conduit including laying of PVC conduit of 25mm dia with all accessories with 6 sqmm PVC insulated green copper cable FRLSH for continuous earth dolly including taking down complete all as specified and directed by Engr-in-charge.

Material and Labour for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 4 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into surface/concealed including laying of PVC conduit of 25mm dia with all accessories with 4 sqmm PVC insulated green copper cable for continuous earth dolly including taking down complete all as specified and directed by Engr-in-charge.

Material and Labour for checking & repairing of DBs/ meter panel board/Circuits/submain wiring and other connected works including rectification of faults as directed by JE/Engr-in-Charge.

Supply and fix in repair LED batten 10W 2 feet mounted on wall / surface connecting with all required accessories like flexible cable from ceiling rose etc including dismantling of existing tube light as directed and specified by Engr-in-charge.

Supply and fixing LED building security light fitting 45W IP 66 protection LED, including taking down existing light complete all as specified and directed by Engr-in-charge.

Supply and fix GI tube (light grade) for making bracket suitable for fixing building security light of 45/60 Watt complete all including taking down as specified and directed by Engr-in-Charge.

Supply and Fix LED 100 watt High bay luminaire metallic body complete fixing arrangement fixed on ceiling with anchor including hanging arrangement as directed by Engr-in-Charge connecting up to 3 core multistranded copper conductor complete all as specified and directed including taking down of existing fitting.

Supply and Fix in repairs MCCB 4 pole, thermal magnetic release range 125 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in Charge.

Supply and Fix in repairs MCCB 4 pole, thermal magnetic release range 63 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in Charge.

Supply and Fix LED tube rod 22 watt change with existing 36 watt tube rod complete all as specified and directed by Engr-in Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size 10x10cm, cocealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls all as specified and directed by Engr-in Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size 15x7.5cm, cocealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls all as specified and directed by Engr-in Charge.

Supply and fix wire mesh suitable size for hole of exhaust fan of 300 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and fix wire mesh suitable size for hole of exhaust fan of 250 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and fix wire mesh suitable size for hole of exhaust fan of 200 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix blade of plastic body exhaust fan 200 mm sweep size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix blade of plastic body exhaust fan 250 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix blade of plastic body exhaust fan 300 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix frame of plastic body exhaust fan 200 mm sweep size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix frame of plastic body exhaust fan 250 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix frame of plastic body exhaust fan 300 mm size including all connected accessories and taking down all as specified and directed by Engr-in Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size 20x25cm, cocealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls all as specified and directed by Engr-in Charge.

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core saddle on wall to fix building security light/ flood light etc, complete all as specified and directed by Engr-in Charge.

M.K Enterprises (BID ID -3128857)

S.P.TRADERS (BID ID -3130045)

LAXMI ENTERPRISES (BID ID -3127883)

D.N.PATIL (BID ID -3131727)

ELECTRO ASSOCIATES (BID ID -3130379)