RENOVATION OF R/QTRS AT 220KV GRID STATION BARN

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix)

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead Wall

Dismantling of damaged old w/c seat ,urinal sink ,taps pipes etc.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. Meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement: 4 fine sand)15% of total 780sqm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :(Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 9.28.3 Second class deodar wood

providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angles 40x40x6mm for diagonal braces

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete 100 mm

Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.

Repair to the damaged shutter / frames including carriages and misc work

Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers, specifications, one or more coats on old work

Finishing walls with acrylic smooth exterior paint of required shade on New work

Cleaning of wooden chowkhats/frames of door, windows, vent etc by scratching with steel patties /brushing and cleaning with wet cloth to remove dirt, dust etc

Applying knife grey filling with a mixture of white cement and chalk mitti after scratching the surface

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard andsoft wood) having VOC content less than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Fixing/ installation of W.C/ wash basin and urinals as reqd

Cleaning of G.I pipes /taps including repair and installation/ fixing etc

Provision for supply and carriage of following material including all accessories, pipes, waste pipes, water storage tank of good quality etc.

Water closet

Wash basins

Urinals

Cisterns

Wash basin taps

Wall tap

Mirror glass

Concealed

Showers

Providing and fixing aluminum glazed shutter of size 9’-0”x9’-0”

Provision for replacing of damaged lights,switches etc

SUMIT SHARMA GOVT CONTRACTOR

Pardeep singh