Karnataka

AOC

Works

Buildings

CONTRUCTION OF NAMMA CLINIC HOSPITAL BUILDING NEAR MANTOOR ROAD HARISHCHANDRA CREMATORIUM IN HUBLI DHARWAD WARD NO 62. IN HUBLI TALUKA OF DHARWAD DISTRICT.

Public Works Department

PWD Division Office Dharwada | Karnataka

Amount: ₹80.6 LCloses: 12 Mar 2025Closed

Timeline

Published1 Mar 2025
Closed12 Mar 2025
Awarded29 Sept 2026

Bids

1 Bid29 Sept 2026

#	Company	Amount	Status
1	Subhas Basavaraj Patil ₹84.5 Laccepted-aoc	₹84.5 L	accepted-aoc

Tender Value

₹80.6 L

EMD Value

₹1.6 L

Closing Date

12 Mar 2025, 4:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EE PWD DHARWAD

Office Number

Work Description

CONTRUCTION OF NAMMA CLINIC HOSPITAL BUILDING NEAR MANTOOR ROAD HARISHCHANDRA CREMATORIUM IN HUBLI DHARWAD WARD NO 62. IN HUBLI TALUKA OF DHARWAD DISTRICT.

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT18117

Reference Number

PWD/2024-25/BD/WORK_INDENT18117

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Dharwada

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 Satisfactorily completed at least 50 Percent of the contract value, as prime contractor at least one similar work such as building work of value not less than Rs.40.32 Lakhs.

RequiredTo qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 executed in any one year the following minimum quantities of work 1. Earthwork Excavation/ Subgarde/Embankment -640.94 Cum 2. PCC/RCC/PQC - 167.95 Cum 3. Steel - 11.13 Tonne 4. Plastering - 1068.62 Sqm 5.Flooring/Tiles - 531.15 Sqm 6. BBM/SSM/CC-solid block/similar masonry wall - 168.50 Sqm.

Requiredas per this note each tenderer should demonstrate availability of few key equipments/machinery for execution of the work. However as per Govt circular no GOFD/AE 263/EXP12-2022 dt 11-05-2022 this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted.

RequiredLiquid assets and/or availability of credit facilities of not less than Rs.24.19 Lakhs Credit lines/letter of credit/ certificates from the bans for meeting the fund requirement etc. LOC should be in prescribed format-2, if not, then the tender will not be accepted.

RequiredTo qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 Achieved in at least Two Financial years a minimum financial turnover-in all classes of civil engineering construction works only of Rs 80.64 Lakhs With UDIN Number

RequiredTearms and Conditions as per KW-3 Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non- ccessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted

All the items in the tender include all lead, lifts, lab our hire charges of machinery curing for concrete works, and all other incidental charges necessary for successful completion of works as per the direction of Engineer - in charge of this work

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding yearboth days inclusive.

The Tenderer shall scan the Original Ownership Documents/ Lease/ Hire commitment Agreement for the Machinery and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification

The Tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the Bidder

The Employer reserves the right to Reject any or all Tenders without assigning any reason

The Department is not responsible for any delay in accessing eprocurement portal

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation

To Qualify for award of this contract, each bidder should give all details and documents as per technical and financial bid attached to this tender

The bidders shall bear all costs associated with the preparation and submission of each tender, and the employer will in no case be responsible and liable for those costs.

All materials required for this work shall be procured by the bidder himself and should got tested by the quality control authorities at his own cost before use on the work.

The Defects Liability Period is 01 years (365 Days)

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-4 KPWD and further orders thereon

18%GST shall be paid to the tendered amount separately

The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section

Successful bidder should produce 5% Security Deposit and difference amount for unbalanced tender

LOC/Letter of Credit should be in prescribed format-2, if not, then the tender will not be accepted

egistration Certificate License Class- III & above

EMD Total Amount Rs 161300/- Part (1) Rs.50000/- by e-payment in favour of Executive engineer, PWD Division Dharwad & Part(2) of the EMD.Rs.111700/- by FDR issued by Nationalized/Scheduled Bank. Contractor should upload the scanned Copy of FDR issued by Nationalized/Scheduled Bank

Period of completion 06 months including monsoon

as per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth pecification. The following is the list of Plant & Equipment to be deployed on project 1.Tippers/Trucks 2.Self Loading Concrete mixture with Weigh Batcher-3.Excavator/Backhoe 4.pin/plate vibrator 5.water tankar

Any Deviation/Error/mistake found in units of items, they should be read as in the Unified SR 2023-24(continued for 2024-25) and subsequent Corrigendums and the rates shall be quoted accordingly

Terms and conditions as per kw-3

Star Rates are not Applicable

The bid documents clause 34.4 to be implemented as per deligation of power vide GO No. PWD.423 FC-2018 Bangalore Dtd: 24-09-2018.

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 B To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 Satisfactorily completed at least 50 Percent of the contract value, as prime contractor at least one similar work such as building work of value not less than Rs.40.32 Lakhs.

Others -- Others

Capabilities of Vendor

To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 executed in any one year the following minimum quantities of work 1. Earthwork Excavation/ Subgarde/Embankment -640.94 Cum 2. PCC/RCC/PQC - 167.95 Cum 3. Steel - 11.13 Tonne 4. Plastering - 1068.62 Sqm 5.Flooring/Tiles - 531.15 Sqm 6. BBM/SSM/CC-solid block/similar masonry wall - 168.50 Sqm.

Work Done Certificate

The Tenderer should be a PWD Registered Class III & above contractor

PWD Registration Certificate (Class I/II/III/IV)

as per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GOFD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted.However it is obligatory for the contractor touse the following machineries for various activities involved in construction as per Morth pecification. The following is the list of Plant & Equipment to be deployed on project 1.Tippers/Trucks 2.Self Loading Concrete mixture with Weigh Batcher-3.Excavator/Backhoe 4.pin/plate vibrator 5.water tankar

Others -- equipments

Financial Status

Liquid assets and/or availability of credit facilities of not less than Rs.24.19 Lakhs Credit lines/letter of credit/ certificates from the bans for meeting the fund requirement etc. LOC should be in prescribed format-2, if not, then the tender will not be accepted.

Line of Credit

3.2 b.To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 2020-21 2021-22 2022-23 and 2023-24 Achieved in at least Two Financial years a minimum financial turnover-in all classes of civil engineering construction works only of Rs 80.64 Lakhs With UDIN Number

Audited CA Certificate of Annual Turnover

Others

Tearms and Conditions as per KW-3 Bid Document

Others -- OTHERS

Fee & Financial Details

Tender Fee Amount

₹2,020

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

29 Sept 2026

Published

1 Mar 2025

Bid Opening

13 Mar 2025

Download Ends

11 Mar 2025

BOQ Preview

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevan...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For foundation isolaed footing form works consider 8% (As p...

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For columns form works consider 70% (As per appendix-I)

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For plinth beams form works conside r50% (As per appendix-I...

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For lintel form works consider 60% (As per appendix-I)

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For slab beams form works consider 60% (As per appendix-I)

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For slab & stair form works consider 50% (As per appendix-I...

•

As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For chejja form works consider 45% (As per appendix-I)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all material...

•

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening cutting, bending, hooking, laping welding joints, t...

•

Providing Mathi Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

•

Providing and fixing factory made UPVC door frame made of UPV extruded sections having an overall dimension as below (tolerance mm), with wall thickness 2.0 mm 0.2 mm), corners of the door frame to be...

•

Solid foam uPVC sheet 20mm thick prelaminated on both side

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi Chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of require...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622,

•

of approved make, in all colours & shade, over 12 mm...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved

•

make in all colours, shades except burgundy, bottle gr...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Finishing walls with water proofing cement paint of required shade:Old work (one coats applied @ 2.20 kg 10 m²) over priming coat of primer applied @ 0.80 litrs 10 m² complete including cost of ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two coat applied @ 0.90 ltr 10 m² over an under coat of primer applied @ 0.80 ltr 10 m² of approved brand and manufactur...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr 10 m² over an under coat of primer applied @0.75 ltr 10 m² of approved brand and manufacture to ...

•

Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and fo...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil, grease,...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

•

Providing and laying water proofing reatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied P...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore ( Vol-2, P.No-115/13.4.1) ---- --- with all leads and lifts cost and conveyance of...

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore, Horizontal (Vol-2, P.No-115 / 13.6.1.1) ---- --- with all leads and lifts cost and conveyance o...

•

Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and o...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (Vol-2, P.No-115/13.2) ---- --- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire...

•

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore (Vol-2, P.No-115/13.3.2) ---- --- with all leads and lifts cost and conveyance of all materials, cost of labour, curing, h...

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 0x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard f...

•

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, ...

•

Providing and fixing 100 mm sand cast Iron grating for gully trap.

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe 19 20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and running...

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc., and running befor...

•

Supplying heavy gauge PVC Conduit Pipe 19 20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1...

•

Wire:Wiring for lighting power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specifi...

•