REPAIRS TO JOINERY, PLASTERING AND ALLIED SERVICES TO CERTAIN BLDGS AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Demolition of brick/concrete block work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L brick work with sub class B old size bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately) complete all as specified and directed.

Supply only integral Water Proofing Compound complete all as specified and directed.

M&L for rendering 5mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces as in ceilings complete all as specified and directed.

M&L for applying three coats of white washing including preparing new surfaces of wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bond distemper white or any tint over a coat of primer after preparation of wall surface with Birla/Asian wall Putty complete all as specified and directed.

M&L applying two coats of cement based paint on new plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M&L for preparing new surfaces of walls, plastered or unplastered and applying three coats of white wash to ceilings all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

M&L applying two coats of Apex paint over a coat of primer on old decorated or undecorated surfaces including preparation by brushing, washing rubbing down and stoping of distempered and painted surfaces, complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and directed.

S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and directed.

M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain any numbers, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

S&F 25mm thick, block board grade 2 quality interior grade decorative type with decorative face veneer on both face fixed as in shutters complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 200mm long aluminium alloy anodised sliding door bolt with hasp and staple ( bolt type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F, 75 mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 150mm size aluminium handles,cast type, anodised complete all as specified and directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

M&L for welding in repairs not exceeding 2.5 cm in length thickness of metal to be welded not exceeding 6 mm complete all as specified and directed.

M&L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old unserviceable complete all as specified and directed.

S&F steel windows with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old unserviceable complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 , E-165.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece, single (single Y), equal or unequal with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed.

S&F in repair 110mm bore PVC(SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm bore PVC(SWR) vent cowl complete all as specified and directed.

S&F in repair ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 15 mm dia complete all as specified and directed.

M&L 75 mm PVC (SWR) floor trap/gully trap , plain with grating including jointing with solvent cement complete all as specified and directed including taking down old unserviceable complete all as specified and directed.

S&F in repair water closet vitreous china squatting pan,Orissa pattern size 580x440mm white with integral foot rests ( excluding flushing cistern and flush pipe) and including with 'P' or 'S trap complete including' provison of lime concrete bedding complete all as specified and directed.

S&F in repair 10 litres capacity valveless syphonic action type PVC flushing cistern low level, with accessories, fixed complete incl. connection to water pipe complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm including bracket fixed to wall complete after taking down old unserviceable complete all as specified and directed.

S&F in repair 32 mm dia bore ( half or full threaded) waste coupling of PTMT (min wt 45 gms) complete all as specified and directed.

S&F 15 mm dia brass chromium plated pillar tap, with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed.

S & F in repair 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair stainless steel sinks with drainage board made of 1mm thick sheet for kitchen or laboratory with plugs, washers and waste pipe, including fixing cantilever brackets and connecting union overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 32mm bore waste pipe for kitchen sink complete all as specified and directed.

S&F in repairs chromium plated health fauset,teliphonic type,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed.

S&F in repair 15mm bore Chromium Plated angle valve of approved make, screwed down for iron on both ends pipe complete all as specified and directed.

S&F brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unionand cap and fixed in repair for 32 mm bore complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repair magic eye 50mm long fixed to main entrance door complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L glazed ceremic tiles in vertical surfaces 450x300x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

S&F decorative droppery rod (DDR) 20-25mm nominal dia having wall thickness not less than 1mm thick fixed in repairs incl necessary holder / brackets, wall pieces/fennial (latto)etc complete all as specified and directed.

Demolition of concrete in ground floor (unreinforced) of any position not otherwise specifically provided for including removal of debris outside MD land complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6,Type C1, (using 20 mm graded stone aggregate) as in plinth protection incl finishing the surface even and smooth w/o using extra cement complete all as specified and directed.

M&L 40mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.

M&L 100 mm thick cement concrete 1:3:6 type C2, (using 40mm graded aggregate) as in hard standing including finishing the surface of concrete by broom complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregates) in flooring complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 45,255.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S MANSI TRADERS

GAYATRI CORPORATION

M/S DEEN ENTERPRISES

SHREE RAM CONSTRUCTIONS

M/S CHAUHAN ELECTRIC WORKS

BUDDHA CONSTRUCTIONS

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED