Civil and Electrical works for procurement and installation of ESD flooring and earthing in the components storage place SLRDC STORES in HAL factory area Hyderabad

Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness including stacking serviceable materials and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Plastering internal / external brickwalls / concrete surfaces with C.M 1:6, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding,etc. at heights with rate including cost of all materials,labour,curing,transportation,other incidental charges,etc all as specified and directed by EIC.

Supplying and laying 2mm thick self levelling Epoxy screed compound consisting of Base, Filler and Hardner of FOSROC / SIKA / MYK make mixed in proportions as recommended by manufacturer over a coat of Epoxy primer MYK 1260 or equivalent product from FOSROC / SIKA / MYK including cleaning the surface thoroughly,making it free from grease,oil etc,scarifying, filling pot holes with epoxy putty,etc with rate including cost of all materials,necessary tools,labour charges, transportation,etc complete all as specified and directed by EIC.

Providing and laying single layer homogenous ESD flooring with marbled surface pattern as per EN ISO 10581 of ARMSTRONG make or equivalent product from TARKETT having gaps filled with thermal welding including cleaning the surface, providing copper ribbons of 25mm width and 25micron thcikness forming a grid of 1.0m x 1.0m. The sheet should have thickness of 2mm, width of 2.0mts & length between 16 to 20mts with rate includng cost of all materials,wastage, labour,tools, conductive adhesive etc all as specified and directed by EIC.(The sheet should have residual indentation of 0.05mm as per EN ISO 24343, the color fastness > 6 as per ISO 105-B02, vertical resistence R1< 1 x 106 Ohm as per EN1081 and the static electric charge < 2kV as per EN1815.The product should also confirm to class Bfl - s1 in flammability test as per EN 13501 - 1, slip resistence of R9 as per DIN 51130.

Providing and fixing 30mm X 30mm size PVC coving forat junctions of wall and flooring with necessary corner pieces including sealing the joints with necessary sealants etc complete all as specified,directed and approved by EIC.

Providing and erecting partly glazed and partly panelled powder coated Aluminium low / full height partitions using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 SQM with 12mm thick pre-laminated board having twin finish of Novopan / TESA in top rows and 5mm thick float glass of MODI / ST GOBAIN bottom rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant etc. Specification for aluminum sections to be used is a) Bottom members - a) 95.25 x 44.45 x 2.00mm b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm.

Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium sliding door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members - a) 95.25 x 44.45 x 2.00mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.88mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips -Weight of 0.097Kg/RM. I) Aluminium powder coated Guide channel 4.0m long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 6 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant, etc

Providing and fixing in position (at any ht.& level) two track glazed, Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 4.00mm thick plain float glass of MODI / SAINT GOBAIN make with approved quality rubber / nylon gaskets, providing and fixing standard Aluminium handles with locking arrangement, necessary wheel / rollers etc.,. The windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member two track section 61.85 x 31.75 x 1.20 mm. b) Top & sides of two track section 61.85 x 31.75 x 1.30mm. c) Shutter top & bottom 40 x 18 x 1.29mm d) Shutter interlock 40x27x 1.29mm e) Shutter handle side 40 x 18 x 1.29mm complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. [Gaps between wall / beam and Aluminiumframes shall be filled with silicon and made good].

Removing the existing single / double leaf Aluminium doors carefully from position, modifying the size by cutting the size Aluminium sections,laminated boards, glass panes,etc to required length / size and fixing the same in original position with rate including cost of consumables needed if any, labour charges,transporation,taxes,etc all as specifed and directed by EIC.

Providing,fabricating and fixing frame for fixing flyproof mesh using powder coated Aluminum sections including cost of materials,wastage,necessary tools,labour,etc all as specified and directed by EIC.

Supplying & fixing PVC Velcrow type flyproof mesh with least aperture size and maximum dia for windows with rate including cost of all materials,wastage,labour charges for fixing, beading, transportation,taxes,etc all as specified and directed by EIC.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size (preferably 0.3m x 0.45m) as approved by EIC, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete all as specified and directed by EIC.

Preparatory work on walls,beams, columns etc. and supplying & applying Two coats of Acrylic Emulsion paint of interior grade (ready mixed) having VOC content less than 50 gms/litre or equivalent product in Berger make of approved shade with rate including cost of all materials, labour,tools, scaffolding, wastage, etc complete all as approved, specified and directed by EIC

Disposal of building rubbish / malba / similar unserviceable, dismantled material like structural steel or waste materials by mechanical means, including loading,transporting, unloading to specified location,beyond 50 m initial lead, for all leads (within HAL premises) including lifts involved,vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.

Power Wiring : Supply and laying of following FRLS PVC inulated 1.1kv grade flexible copper multi stranded conductor in a suitable PVC cassing caping on the surfaces or PVC conduit pipes which are to be concealed in the existing existing walls/ under ground trench by making floor cutting with all inter connection complete as and when required with in the shot notice of period by suppling all required fixing accessories also as per site requirement by taking all safety measures. The scope also includes identification of incoming source and dressing of cables in the existing DBs.Make:Finolex/Havells/FortunArt/gloster. 2 runs of 2.5 sq mm and 1 run of 1.50 sq mm copper wires

Mod switch boards: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.16 Amp switch & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch and 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens

Providing of Mod switch boards-Supply and fixing of 6modular switch board with with 2 nos of 6A,16 Amps SP modular switches, 2Nos 6,16 A sockets . The box shall be concealed on wall with suitable fixing accessories.Make: Fixing accessories-Legrand/Philips/Anchor Note: Scope includes replacement of existing switch board with necessary cement patch work as directed by EIC

POINT WIRING For exhaust fans : Supply, laying & fixing of one light points controlled by one no. 6 A SP modular switch suitable MS box & cover plate, 2 runs of 1.5 sq. mm & 1 run of 1.0 sq. mm FRLS / Flame Retardant PVC insulated flexible copper conductor 1.1kV grade concealed with 20 mm dia 2 mm thick PVC conduit pipe shall be laid on wall with concealed. Its including concealed in wall and holder / ceiling roses as per site requirement and inter connections complete. One Point beyond 12 mtrs shall measured separately. 1 fan points controlled by 1 no. 10 A modular type SP switch. wire Makes: Havells / Fortune Art/Fenolex/polycab/Gloster

5 PAIR TELEPHONE CABLING: Supply and Iaying of 2 Pair unarmoured , telephone cable in a suitable rigid PVC conduit of 2mm thickness with all necessary bend, junction boxes and other acceessories. Make: Amp /Finolex/ Dlink / Mazda / polycab

LAN CABLING:Supply and Laying of Cat-6 cable in a suitable rigid/Flexible PVC conduit of 2mm thickness with all necessary bend, junction boxes and other accessories as per site conditons.Make: Amp /Finolex/ Dlink / polycab

PROVIDING MODULAR TELEPHONE JACKS: Supply and provisioning of RJ 11 Telephone Jack double lines with shutter and to be conceiled on wall . Make: Legrand / Siemens

PROVIDING MODULAR LAN JACKS: Supply and provisioning of RJ 45 UTP Information Out let Category 5 - 1 module and conceiled on wall Make: Legrand / Siemens

COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect.

EARTH STRIP: Supply & laying of 25 mm x 3 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.

3-PHASE TETEMPRA SOCKETS : Supply fixing, testing and proveing of 32A, 3P+N+E 5P) 3-phase industrial socket distribution boards Universal mounting type with 3P+N+E 5P controlled by 32A suitable rating equvalent 4P MCB as per site requirement for air conditioners power supply. The boards shall be mounted on conceiled/ surface of the wall/ pillor or on suitable iron amgular frame or grounted as per site requirement & as directed by EIC, including grouting materials such as cement for patch works complete. Make:Legrand / Seimens

POWER WIRING FOR TOWER AC: Providing and laying of 3 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab / Gloster

Power DB: Supply, Installation, following factory made vertcal mounted duble door factory made 440V MCB Distribution board. The Enclosure shall be made of 1.6 mm thick CRCA Sheet Steel powder coated with approved shade and partition to segregate phase with covers & mounting concealed on wall with suitable angle iron frame & grouting fixtures, anchor bolts & nuts with inter connections complete.12 way SP & N MCB DB with encloser double door type & 200 amp rating Busbar. Make:Legrand/Seimens Incomer : 32-63A Amps 4P MCB- 1 Nos Outgoing : 16-32 Amp SP MCB - 24 Nos Make :Legrand & Seimens.

Provisioning of 9 inch Exhaust fans with louvers : Supply and fixing of 12 inch exhaust fans with louvers in toilets with necessary fixing accessories complete as per site as directed by EIC. Almonard/wipro/Havells/Usha

Air curtains: Supply and provisioning of (500-700 )Watt , industrial MS powder coated air curtain at the entrance of the store for removing dust while entry with following specifications: Air velocity :14-17 mts/sec, Epoxy powder Coated Rust Proof, width- 6.0 Ft,Suitable to door Height of 8 Ft,

ESD palmplate stand: Supply and provosioning of ESD safe-anti static palm plate of 30cmx30cm dimentioms with discharge cable card / wrape strape set pack for grounding the source and LED indication . Scope includes provisioning of 3 feet stand for mounting the same

HAL/SLRDC/CE/T/24-25/3

Civil & Electrical works for procurement and installation of ESD flooring and earthing in the components storage place(SLRDC STORES) in HAL Factory area.

Description

Name of the Individual / Firm / Company: * (Mandatory)

Type of ownership / Legal Status [Attach copies of the original document defining the legal status]

Year of Establishment of Company/Business

Registered Office Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

Correspondance Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

PAN no

PF number (If any)

ESI number

GST registration number

Particulars of registration with various Government bodies (Attach documentary proof)

Contact details

Please enter Contact person name

I.T Returns for past 03 years

Enclosed

Enclosed

Enclosed

Maximum value of works executed during the following 05 years and it should be certified by Chartered Accountant. (In Rs. Lakhs)

Please enter maximum values of works (sum of all the works in the respective year) in Rs. Lakhs for all the years

#VALUE!

DETAIL OF WORK ON HAND UPTO COMPLETION PERIOD OF SUBJECT WORK [Required for Bid capacity calculation] .Details are also to be furnished on Proforma-D

Name of Organization with address

Action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code

Bank Statement for past THREE months

Latest Over draft Facilities with Bankers

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of Tender.

#VALUE!

Please enter Latest Solvency Details and upload the same

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following:. [ Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Name of The organisation

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Name of The organisation

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

DETAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficient separate sheet to be uploaded with the same format as below)

Name of members or technical personnel available in the organization

PLANT, MACHINERY AND EQUIPMENT AVAILABLE [The Plant, Machinery and equipment (either owned or leased) that can be made available for this work must be furnished below].

Name of Machinery

Works of similar nature successfully completed in addition to Sl. No. (21) of Applicant Particulars (1) during the last 07 years ending last day for previous month.

Name of the work / project and location

Details of person holding the power of Attorney

Please enter Person holding the power of attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

EMD details

SBI collect Ref No

Please enter Tender Document EMD Details