REPAIRS TO BRICK WORK, JOINERY FALSE CEILING PLASTERING FLOORING PLUMBING AND SANITARY FITTINGS AT TECHNICAL AREA ZONE - I AND II UNDER GE I RND RCI HYDERABAD

Amount

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar including disposal of debris off the premises complete all as directed.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L, 10mm thick rendering in cement mortar 1:6, on fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 15mm thick rendering in cement mortar 1:4, on other than fair faces of brick or concrete surfaces, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparing newly plastered surfaces of walls and ceilings and applying two coats of distemper oil emulsion, white or tinted over coat of alkali resistant primer over a coat of 1mm thick wall care putty including rubbing/ grinding with sand paper and making smooth and even surface as per manufacturers instructions complete all as specified and as directed.

M&L, preparing newly plastered surfaces of walls and ceilings and applying two coats of water proof external wall care putty and making surface even and smooth to receive external emulsion and applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparation of old plastered surfaces of walls including cornices, pilasters etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L, preparation of old plastered surfaces of ceilings and applying one coat of distemper oil emulsion complete all as specified and directed.

Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.

M&L, PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L, light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 300 x 300mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note for item No 15&16: Design of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as directed.

M&L, 20mm thick, approved pre polished Granite work (of any type, table rubbed and polished) edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 15mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Dismantling of sheets in roof coverings (corrugated, semi corrugated etc.,) any material including ridges complete all as directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet / trapezoidal steel sheet 0.50mm base metal thickness of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F in repairs, Fine Fissured RH99 Armstrong ceiling tile of size 600 x 600 x 12/16mm thick as per approved pattern complete all as directed.

S&F in repairs, metallic fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%, Thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance Class-I (BS476 Part 6 & 7) in module size of 600 x 600 x 16mm with bio black coating on the face of the tile, impact resistant and suitable for green building application, with recycled content of 63%, Tile shall be laid on Silhouette profile grid system with 15mm white/black colour and with a web height of 38mm and having load carrying capacity of minimum 11.68 Kgs/Sqm, Silhouette, Main runner and Cross tees to have mitred ends and Birds mouth notches to provided mitred cruciform junction complete all as specified and directed. Make: Armstrong, Saint Gobain

M&L in repairs, 12mm thick gypsum board in false ceiling fixed with screws as per manufactures specifications including applying one coat of putty, rubbing/grinding with sand paper and making smooth and even surface and applying two coats of distemper oil emulsion over a coat primer complete all as directed. Make: Saint Gobain or equivalent as approved by GE.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as directed.

S&F, mild steel framed work such as ornamental and intricate design framed and hung gates, grills, etc., with ends of bars shouldered and /or riveted, or forged into spikes, barred iron doors; and similar works including pintle hinges, stops, hand-made sliding bolts, etc., conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F, mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L, preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Easing of aluminum door by adjusting floor spring, locking device, tower bolts, hinges, oiling /greasing in hinges and floor spring and making fully functional complete all as directed.

Easing of aluminum window with openable shutter or sliding window by adjusting rollers, bends in tracks, hinges, handles, tower bolts, oiling /greasing in hinges and making fully functional complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.

S&F in repairs, powder coated aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat for fixing etc., fabricated complete to receive sheet glass complete all as specified and as directed.

S&F in repairs, powder coated aluminium door/sliding window shutters with aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, anodized aluminum snap beading, screws, handles and suitable locking arrangement for window shutters etc., complete all as specified and as directed. Note for item No 36 & 37: Minimum thickness of powder coating shall be 50microns.

S&F in repairs, standard EPDM rubber gasket for fixing of glass in doors or windows or ventilators complete all as specified and directed.

S&F in repairs, powder coated aluminium Deco grill of design DG-202 complete all as directed. Note: Weight of grill shall not be less than 2.5Kg/Sqm

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.

S&F in repairs, 4.8mm thick sheet glass, plain, ordinary quality, square or rectangle, area exceeding 0.5sqm in each pane and fixed to aluminium frame work complete all as specified and as directed.

S&F in repairs, 4.8mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F in repairs, 5.5mm thick sheet glass, ground or obscured or frosted on one side, ordinary quality, area exceeding 0.50Sqm in each pane complete all as specified and directed.

M&L in repairs, 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to aluminium framework complete all as specified and as directed.

S&F, second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints etc., complete all as specified and directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

M&L, preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts/pipes and making good dismantled portion in cement mortar 1:3, depth of embedded portion of holdfasts/pipes or lugs measured from the face of the jamb into wall shall be exceeding one brick but not exceeding two brick thick, complete all as specified and directed.

S&F, mild steel clamps, hold fasts and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F in repairs, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

All as per item No 52 but wood grain printed PVC sheet used instead of plain colour PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F in repairs, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs, aluminium (Die cast) body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60Kg complete all as specified and as directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F, aluminium door Lock seven lever vertical type brass body, 100mm long with duplicate key complete all as specified and directed. Make: Godrej, Link, Harrison

S&F in repairs, set of stainless steel pull handle of grade 304 for glass door, 'H' type, 32mm x 457mm complete all as specified and directed. Make: Godrej model No 2811 or equivalent as approved by GE.

S&F in repairs, vitreous china wash hand basin white 550 x 400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed

S&F in repairs, vitreous china oval shaped wash hand basin, white or coloured of size 550 x 440mm or as per existing at site mounted on granite top including PVC waste pipe and coupling of suitable size complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs, floor mounted water closet with cistern, white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete fixing to wall with bolts all as specified and directed. Make: Hindware CAT No 20089 (S-10) and 21038 or techno commercially equivalent in Parryware or Jaquar

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 630 x 450mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware

S&F in repairs, vitreous china Urinal, half stall type with sensor, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed.

S&F in repairs, vitreous china Urinal, half stall type, white, including chromium plated urinal spreader, providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed.

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs, 15mm bore angular stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed. Make: Jaquar model No KUP-CHR-35053PM or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore 2 way bib cock, chromium plated with wall flange complete all as specified and directed. Make : Jaquar Model No FLR-CHR-5041N or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore bib cock, long body, chromium plated with wall flange complete all as specified and directed. Make: Jaquar Model No CON-CHR-107KN or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 20mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No152 or equivalent as approved by GE

S&F in repairs, 25mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No153 or equivalent as approved by GE

S&F in repairs, chromium plated towel rail 20mm dia, 'D' type, 600mm long, premium quality all as directed.

S&F in repairs, chromium plated towel ring complete all as specified and directed.

S&F in repairs, chromium plated toilet paper holder complete all as specified and directed.

S&F in repairs, chromium plated fancy type soap dish, as in repair etc. complete all as specified and as directed.

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, stainless steel grating round of size 100mm complete all as specified and directed.

S&F in repairs, waste coupling of PTMT (half or full threaded) (Minimum weight 45grams), 32mm bore dia of discharge pipe complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with suitable clamps complete all as specified and as directed.

S&F in repairs, 160mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with sitable clamps complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F, 160mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 98 above but 20mm bore of pipe.

All as per item No 98 above but 25mm bore of pipe.

All as per item No 98 above but 40mm bore of pipe.

All as per item No 98 above but 50mm bore of pipe.

S&F in repairs, 15mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

All as per item No 103 above but 20mm globe or gate valve.

S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or urinal complete all as specified and directed.

S&F in repairs, PVC flush bend with coupling suitable for low level flushing cistern complete all as directed.

S&F in repairs, 32mm bore, chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

All as per item No 108 above but 1000litres capacity.

All as per item No 108 above but 2000litres capacity.

S&F in repairs, venetian blinds with sliding rail vertical type frame, fabric type, fixed in position complete all as specified and as directed. Note: Colour shade and pattern of fabric shall be as approved by GE.

S&F in repairs, venetian blinds window roller /horizontal type with blinds of approved colour shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

EXELLENT POWER CORPORATION

SHAH ENTERPRISES