REPAIR MAINTENANCE OF ELECTRICAL OLD VINTAGE WIRING ALONGWITH FITTING AND FIXTURES FOR OPS WORK SHELTERS AND CERTAIN BLDGS AT VARIOUS LOCATION AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing & caping including cutting chases for cinduits and making good disturbed surfaces complete all as specified and as directed.

All as per Sl item No.03 above but without taking down steel conduit.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick hylum sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed . Note :- surface conduit shall be laid in ceiling portion only.

All as per serial item No 5.00 above but for 5 Amps socket outlet on same board with other switches.

All as per serial item No 5.00 above but for 5 Amps socket outlet on independent board.

All as per Item No. 5.00 above but for 15 Amps socket point on independent board with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including in PVC casing & caping with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick hylum sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 9.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 9.00 above but for 5 Amps socket point on independent board.

All as per serial Item No. 9.00 above but for 15 Amps switch socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and as directed.

S&F in replacement switch piano 5 Amp flush type single pole one way with ISI marked,complete all as specified and as directed.

S&F in replacement socket outlet 5 Amps 2-in-1, 3 pin 230 V AC flush type, complete all as specified and as directed.

S&F in replacement switch socket outlet 5 Amps 2-in-1, 3/5 pin 230 V AC flush type, complete all as specified and as directed.

S&F in replacement switch socket outlet, multipurpose, 3 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch complete all as specified and as directed.

S&F in replacement ceiling rose, 3 phase / PVC / Polycarbonate, isolated body two to three terminals complete all as specified and as directed.

S&F in replacement bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed.

S&F in replacement Bell ding dong AC 230 volt single pole complete all as specified and as directed.

S&F in replacement of Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet complete all as specified and as directed.

S&F in replacement of Electronic mini fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet complete all as directed.

S&F LED light fitting 1X5W bulk head luminaries, with lamp holders including 9 W LED bulb including taking down old fitting complete all as specified and as directed Make : Havells/ Bajaj/Philips/CG / wipro

S&F in replacement of LED tube light fitting 20W 4 feet PVC extruded with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including retrofit T5 polycarbonate tube with connector block and connectiong up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Havells Cat Part No. LHEXBXPNIN1W020 or techno commercially equivalent model of make Bajaj /Philips / CG / wipro

S&F in replacement of LED PVC extruded batten tube light fitting 2 feet, 10 watt with retrofit T5 polycarbonate tube with connector block etc.,complete with all accesories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : HPL / Havells / CG / Philips/ wipro

S&F LED tube rod ( integrated driver), 6000K colour temp, 4 feet long of 18 watt (PC) in existing tube light fitting including taking down old tube rod complete all as specified and as directed Make : CG / Bajaj /Philips / Havells/ wipro

S&F in replacement of Recess mounted 36W LED panel light (2' x 2') cool white , white powder coated CRCA sheet steel housing with high power LED's mounted, seamless front frame with flat white high transmission acrylic cover with all accessories and prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Bajaj model No. BZRSQL 36W GZi NW or techno commercially equivalent make in CG / Havells / Philips / wipro.

S&F in replacement lamp Holder, insulated body with back plate , 230 Volts for batten fitting complete all as specified and as directed.

S&F LED down light of 5/6 watt of warm white / yellow 5" dia (as per existing) flat down light back lit, recess mounting round type with all attachment including taking down old down light complete all as specified and as directed . Make : Bajaj / Havells / Philips / CG / wipro

S&F LED down light of 7 watt of warm white / yellow 5" dia (as per existing) flat down light back lit, recess mounting square type with all attachment including taking down old down light complete all as specified and as directed . Make : Bajaj / Havells / Philips / CG / wipro

S&F in replacement of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LED's with secondary optics and IP-66 protection security light luminaires 25 W, 5700K, impact resistance of IK 07 fixed with and including bracket and made out of 25 mm dia GI tube light grade 1.2 mtr bend to shape as required including 02 Nos MS clamp (FI 25 x 3mm) with nuts and bolt washer including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Havells Model No. LHETAXU7PA6S025 or techno commercially equivalent make in Bajaj / CG / Philips/ wipro

S&F PVC board of size 30cmX25cmX 5cm depth including taking down old board complete all as specified and as directed.

S&F PVC board of size 25cmX20cmX 5cm depth including taking down old board complete all as specified and as directed.

S&F PVC board of size 20cmX15cmX 5cm depth including taking down old board complete all as specified and as directed.

M&L for PVC hylum sheet 3mm thick top cover of size 30cmX25cm including taking down old one complete all as specified and directed.

M&L for PVC hylum sheet 3mm thick top cover of size 25cmX20cm including taking down old one complete all as specified and directed.

M&L for PVC hylum sheet 3mm thick top cover of size 20cmX15cm including taking down old one complete all as specified and directed.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

M&L for submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

M&L for submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing conduit / PVC casing & caping and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 2 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 415V for fixing MCB's complete all as specified and as directed.

Taking out old unserviceable MCCB TP/ TPN FP from existing LT panel board and S&F MCCB TPN 100 Amps capacity, breaking capacity 25KA at 415V 50 Hz AC supply including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nut, bolts, burnt lugs and wire/ cable pieces as required at site complete all as specified and as directed.

M&L MCB SPN ‘C’ Curve 10KA, 5 to 32 amps 240 volt complete all as specified and directed .

M&L MCB SPN ‘C’ Curve 10KA, 40 amps 240 volt complete all as specified and directed .

M&L MCB SPN ‘C’ Curve 10KA, 63 amps 240 volt complete all as specified and directed .

M&L MCB SP ‘C’ Curve 10KA, 5 to 32 amps 240 volt complete all as specified and directed .

M&L MCB SP ‘C’ Curve 10KA, 40 amps 240 volt complete all as specified and directed .

M&L MCB SP ‘C’ Curve 10KA, 63 amps 240 volt complete all as specified and directed .

M&L MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed . Make : Legrand cat part No. 603308 or techno commercially equivalent model of make Siemens/ Havells

M&L Blankig plate for filling gap of MCB complete all as specified and directed.

M&L single pole and neutral enclosure with two pin earth plug and socket with one MCB SP 20 Amps, 240V complete all as specified and as directed. Make : Legrand/Havells/Schneider

Taking down ceiling fan / wall mounting fan ,any size and sweep from its position and transport to workshop for servicing,dismantling for servicing including removal of bearing,bushes,condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assamble the same and transporting from workshop to any location in Jalipa and fixing to position / location as directed, connecting to electric system, testing etc complete all as specified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store / workshop & taking down unserviceable/ defective parts. (iii) Item such as bearings, gun metal bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only.

Taking down and transporting of exhaust fan 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside Jalipa Mil Stn to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location including making good disturbed surface including testing etc complete all as specified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store / workshop & taking down unserviceable/ defective parts. (iii) Item such as bearings, bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only.

M & L spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as directed by Engineer-in-charge.

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1200mm sweep complete all as specified and as directed.

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1400mm sweep complete all as specified and as directed.

Supply only U clamp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and as directed.

M&L cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnout winding of 230 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnout winding of 300 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed.

M&L spray painting with two coats of spray painting to exhaust fan any type and size with Ist quality synthetic enamel paint, colour as approved after removing existing paint by scrubbing, dusting etc and finally writing the fan numbers etc in paint (Colour as approved ) complete all as specified and as directed.

Supply only ball bearing suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and as directed.

Supply only gun metal bush suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only gun metal bush suitable for exhaust fan any sweep complete all as specified and as directed.

Supply only condensor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only condensor 4.0 MFD suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only metalic bottom plate of ceiling fan of any sweep complete all as specified and as directed.

S&F in replacment 230mm sweep Exhaust fan plastic body minimum three star rating with accessries complete all as specified and as directed .

S&F in replacment 300mm sweep Exhaust fan plastic body minimum three star rating with accessries complete all as specified and as directed .

S&F in replacment 1200mm sweep ceiling fan minimum three star rating complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed.NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L for Submersible pump of discharge head 2.5 Mtr 220-240 volts AC supply single phase 40 watt including taking down old pump complete all as specified and as directed.

M&L for Wood / wool chips pad for Desert Cooler of size 600 x 550 x 30mm (set of three pads) superior quality complete all as specified and directed including taking down old pads complete all as specified and as directed.

M&L for supporting jali to wood / wool chips pad set made out of hard MS wire and fitted inside louvers (set of three) complete all as specified and directed including taking down old jali complete all as specified and as directed.

M&L for PVC insulated and PVC sheathed cable copper conductor 3 core 23/0.0076 cross sectional area (superior quality) including taking down old cable complete all as specified and as directed.

M&L for PVC water distributor of 3 out lets with MS nuts & bolts including taking down old one complete all as specified and as directed.

M&L for PVC elbow suitable for desert cooler including taking down old elbow complete all as specified and as directed.

M&L for PVC pipe 15mm dia heavy duty for Desert Cooler Pump including taking down old pipe complete all as specified and as directed.

M&L for Plug top 3 pin of capacity 5 Amp AC 240 Volts 50 Hz including taking down old plug top complete all as specified and as directed.

M&L for Motor fixing ring with eight screw (clip type) for desert cooler including taking down old one complete all as specified and as directed.

Spray painting to old steel surfaces of Desert cooler up to 5000 cfm with two coats of synthetic enamel paint over one coat of red oxide primer on external surface and two coats of anti-corrosive black paint over a coat of red oxide primer on inside the body tank and side grills including scraping / rubbing with wire brush on old surface of Desert cooler and writing MES No. etc complete all as specified and directed.

Devi Engineeing

M/s Pankaj Enterprises