ET No. 149/W/EUDC/SRE/2023-24

Amount

Safely carriage of line material from PVVNL, Store to site including loading & unloading at both ends.

Carriage of 250 KVA T/F From PVVNL, Store to site including loading and unloading at both ends.

Carriage of 100 KVA T/F From PVVNL, Store to site including loading and unloading at both ends.

Carriage of 63 KVA T/F From PVVNL, Store to site including loading and unloading at both ends.

Safely Carriage of ACSR weasel condutor from PVVNL, Store to site of work including loading & unloading at both ends.

Safely carriage of LT XLPE Cable 1x400 sqmm from PVVNL, Store to site of work including loading & unloading at both ends.

Safely carriage of LT XLPE Cable 3.5x240 sqmm from PVVNL, Store to site of work including loading & unloading at both ends.

Safely carriage of Allu. XLPE Cable 1x240 sqmm from PVVNL, Store to site of work including loading & unloading at both ends.

Fixing of MS angle 65x65x6 as per Resspo norms.

fixing of MS channel 100x50x6 as per Resspo norms.

Concreting of existing poles as per norms.

Fixing of 11KV TPMO set as per Resspo norms.

Fixing of 11kv fuse set as per Resspo norms.

Fixing of Saty Set complete as per Resspo norms

Fixing of 3 phase Distribution box as per Resspo norms

Supply of different type Nut & bolt as per site condition.

Fixing different type Nut & bolt as per site condition.

Supply of round pole/holding clamp with Nut & bolt as per Resspo norms.

Fixing round pole/holding clamp with Nut & bolt as per Resspo norms.

Supply of Aluminium lugs as per Resspo norms.

Fixing of Aluminium lugs suitable as per Resspo norms.

Fixing of MS Earth rod 20x2540 mm as per Resspo norms.

Construction of plinth 5'x5'x4 for placing 250 KVA T/F including cost of brick ballast, Ist class Brick , sand, cement, concrete and labour and plastring of plinth 12 mm thick as per Resspo norms.

Water leavel earthing by boaring & fixing of 60 ft. deep G.I. Pipe of class 'B' 1.5" dia and connected with G.I. strip of size 30x5 mm including providing GI Strip, GI pipe, charcoel & salt by contractor itself as per resspo norms.

Earthing of T/F with existing earthing system

Earthing of pole with existing earthing system

Mounting and installation of 250 KVA T/F on plinth as per Resspo norms.

Mounting and installation of 250 KVA T/F on D/Pas per Resspo norms.

Mounting and installation of 100KVA T/F on D/P as per Resspo norms.

Mounting and installation of 63 KVA T/F on D/P as per Resspo norms.

Fencing of T/F as per Resspo Norms.

Laying stringing and sagging of ACSR weasel conductor including binding and jumpering as per Resspo norms.

Laying lifting, stringing and sagging of LT XLPE cable 1x400sqmm as per Resspo norms.

Laying lifting, stringing and sagging of LT XLPE cable 3.5x240sqmm as per Resspo norms.

Laying lifting, stringing and sagging of Allu. XLPE cable 1x240sqmm as per Resspo norms.

Fixing of pin insulator as per Resspo norms.

Dismantling of T/F 160KVA 11/0.4 KV old and used

Dismantling of T/F 100KVA 11/0.4 KV old and used

Dismantling of T/F 63KVA 11/0.4 KV old and used

Dismantling of T/F 25KVA 11/0.4 KV old and used

Supply of L.T. Distribution box for L.T. protection of T/F as per Resspo norms.

Fixing of L.T. Distribution box for L.T. protection of T/F as per Resspo norms.

Supply of Danger board with clamps & nut bolt

Fixing of Danger board with clamps & nut bolt

Supply of Alu. Paint

Painting of Pole with Alu. Paint

Supply of red oxide Paint

Painting of Pole with red oxide Paint

Supply of barbed wire

Fixing of barbed wire

Carrige of Dismantled 09 No. T/F and other line material from site to PVVNL, Store including loading & unloading at both ends.

Construction of masonry type Distribution Pillar box with first class brick balast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 02 nos. Staight MS Angle 50x50x6x1200 mm 2 no. Henely type tailless fuse units 300 Amps. 650 Volts 3 No., Copper bus bar 4 nos. 600x50x5 mm with locking arrangement made of 18 swg BP Sheet including LT cable proper connection arrangement. 1- Providing of Henely type tialless units 300Amp. 640 volt consisting of 06 Nos. brass back entry, 06 nos U-type spring contact made of copper, brass coupling with porcelain fitted on the G.I. sheet 16 SWG thick and 1350x100mm size with arrangement of 01 Nos. neutral.

2- Providing of 4 No. CU BUS BAR of size 600x50x6mm size (2.68kg/mtr).

3- Construction of masonry type Distribution Pillar box with first class brick balast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 02 nos. Staight MS Angle 50x50x6x1200 mm 2 no..

4- Proper LT connection arrangment with Lug and other required arrangement

Omveer Singh Contractor and Enggineer

GYAS PAL CONTRACTOR