Additional Work at National Institute of Disaster Management (NIDM) Campus Sector-29 Rohini, New Delhi

NAME OF WORK :Additional Work at National Institute of Disaster Management (NIDM)

Campus Sector-29 Rohini, New Delhi.

BILL OF QUANTITIES

SH DESCRIPTION AMOUNT NS AMOUNT DSR

A SPECIALISED PARTITION WORK 52,50,000.00 -

C ELECTRICAL WORKS 3,22,100.00 -

D PLUMBING WORK 7,30,000.00 -

F AIRCONDITIONING 49,00,000.00 -

G FURNITURE 82,49,500.00 -

H FURNISHING WORKS 46,27,500.00 -

I ELECTRICAL & ELECTRONICS EQUIPMENTS 79,76,750.00 -

J OUTDOOR & INDOOR SPORTS 19,91,910.70 -

K SIGNAGES WORK INSIDE/OUSIDE THE BUILDING 15,70,860.00 -

GRAND TOTAL 47724875.36

GRAND TOTAL 47724875.36

Digitally signed by

SURENDRA SURENDRA KUMAR MEENA

KUMAR MEENA Date:

BILL OF QUANTITIES

NAME OF WORK : Additional Work at National Institute of Disaster Management (NIDM) Campus Sector-29 Rohini, New Delhi.

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

A SPECIALISED PARTITION WORK

1 N.S.-1 Providing and fixing "Variflex" operable partition

consisting of series of individual flat elements of 100 mm

thick travelling along the ceiling track assembled to form

a solid wall. The sound insulation of the operable

partition should be 50db. Elements must be constructed

of a torsion-free steel horizontal tube frame and torsion-

stiff vertical aluminium profiles, bolted together to make

the element strong and sturdy. The frame must be clad

either side with 16mm MDF panels hung in acoustic free

suspension from the panel frame. The elements must be

inter-connected by means of a positive locking

concave/convex aluminium profile with an integrated

magnetic strip and sealing lip having a linear attraction of

40N/m. Each element must have a spindle mechanism

which should be connected to the spring loaded top and

bottom retractable seal. The spindle mechanism should be

operated manually by a bayonet connected crank handle

that acts as a lock in function during cranking process.

The horizontal top and bottom seals must be extended

manually by crank handle and should ensure a contact

pressure of 800N when the seals are completely

extended. The seal spindle mechanism must be accessible

while the panel is hanging for servicing and adjustment if

Total disassembly of the panel frame to access internal

components is not acceptable. No fixed sweep seals

allowed in top and bottom of the element that would rub

against the track or floor while moving the element. The

telescopic element or the end closure element must open

and close 120mm horizontally. The movement of the

telescopic panel and the operation of the horizontal top

and bottom seal and must be operated by a single

NOTE: In case of change in centre stacking position or

provision of doors, there shall be a increase in rate

according to requirement.

Each element must be suspended from the track capable

of withstanding the load of the element. The elements

shall run with the help of steel clad, multi directional

rollers on a 100mm thick aliminum extruded track

capable of taking a weight of 500 kgs/ element. Panel

should be stacked in center stacking positionAfter

installation of tracks, a sound barrier should be erected

between the RCC and the false ceiling consisting of 2

gypsum boards of 12.5mm thick each with mineral wool

filling in between having a density of 48kgs/ cubic meter

and fitted to a G.I. sheet framework. The partition shall

have provision of three number doors of 2000mm clear

Note: The partition is to be installed in Auditorium where

false ceiling , wall panelling and flooring work is alredy

complete. The work shall include cost of any rework to be

done for installation of above partition syastem in existing

flooring , false ceiling, wall panelling or any other allied

item. Contractors are advised to make site visit to access

the magnitude of rework to be done. For measurement

purpose , only finished face of partition shall be measured.

1 1.1.18 Disposal of moorum/building rubbish/ malba/ similar

unserviceable, dismantled or waste material by

mechanical transport including loading, transporting,

unloading to approved municipal dumping ground for

lead upto 10 km for all lifts, complete as per directions of

Engineer-in-charge. Cum 90.00 411.30 37017.00

NBCC 1 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Note - item to be applicable in urban areas having

directions for restricted hours for movement/ plying of

load carrying motor vehicle of 3.5 cum or more

2 2.6 Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.6.1 All kinds of soil Cum 117.00 205.45 24037.65

3 2.25 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

4 4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

aggregate 40 mm nominal size) Cum 6.00 6326.05 37956.30

DAMP-PROOF COURSE

Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-

III): 4 graded stone aggregate 12.5mm nominal size) sqm 5.40 370.85 2002.59

6 4.13 Providing & applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality using

1.7kg per square metre on damp proof course after

cleaning the surface with brushes and finally with apiece

of cloth lightly soaked in kerosene oil. sqm 5.40 113.85 614.79

REINFORCED CEMENT CONCRETE

7 5.1 Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of

centering, shuttering, finishing and reinforcement - All

work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded

stone aggregate 20 mm nominal size) Cum 9.00 8364.20 75277.80

8 5.2 Reinforced cement concrete work in walls (any

thickness), including attached pilasters, buttresses, plinth

and string courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. above plinth level up to

floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded

stone aggregate 20 mm nominal size) Cum 1.08 10185.05 10999.85

9 5.3 Reinforced cement concrete work in beams, suspended

floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth level up to

floor five level, excluding the cost of centering, shuttering,

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III) : 3 graded stone aggregate 20 mm

10 5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass

concrete sqm 1.80 307.95 554.31

5.9.2 Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc. sqm 2.70 669.55 1807.79

5.9.3 Suspended floors, roofs, landings, balconies and access

NBCC 2 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

5.9.4 Shelves (Cast in situ) sqm 4.50 766.55 3449.48

5.9.5 Lintels, beams, plinth beams, girders, bressumers and sqm 35.00 608.35

cantilevers 21292.25

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 3.60 804.25 2895.30

5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 13.50 657.75 8879.63

5.9.16 Edges of slabs and breaks in floors and walls

5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 4.50 814.95 3667.28

11 5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or

12 5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or

Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 30.00 6658.25 199747.50

Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 65.00 8288.35 538742.75

HALF BRICK MASONRY

15 6.12 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in foundations

and plinth in :

6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) sqm 15.00 837.85 12567.75

16 6.13 Half brick masonry with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in superstructure

above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 20.00 1018.05 20361.00

17 8.31 Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade

WOOD AND P.V.C. WORK

18 9.1 Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash

fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

9.1.1 Second class teak wood Cum 0.50 131576.95 65788.48

19 9.21 Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core

of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt

hinges with necessary screws sqm 15.00 2015.75 30236.25

NBCC 3 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

20 9.40 Providing and fixing wooden moulded beading to door

and window frames with iron screws, plugs and priming

coat on unexposed surface etc. complete :

9.40.1 2nd class teak wood

21 9.74 Providing and fixing bright finished brass tower bolts

(barrel type) with necessary screws etc. complete :

22 9.76 Providing and fixing bright finished brass 100 mm

mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc.

complete. each 9.00 723.80 6514.20

23 9.84 Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having

brand logo with ISi, IS : 3564, embossed on the body, door

weight upto 36 kg to 80 kg and door width from 701 mm

to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

24 11.37 Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement mortar 1:4

(1 Cement : 4 Coarse sand), Jointing with grey cement

slurry @ 3.3 kg/sqm including pointing the joints with

white cement and matching pigment etc., complete.

25 11.41 Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and

matching pigments etc., complete.

26 11.46 Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, in skirting, riser

of steps, over 12 mm thick bed of cement mortar 1:3

(1cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with

white cement & matching pigments etc. complete.

27 11.48 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

NBCC 4 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

28 11.55 Providing and laying flamed finish Granite stone flooring

in required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing

and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red,

Elite Brown, Cat Eye or equivalent. sqm 31.50 2589.90 81581.85

29 11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over

20 mm (average) thick base of cement mortar 1:4 (1

cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing ,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent sqm 32.00 3908.80 125081.60

30 12.41 Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion,

(i) Single socketed pipes.

31 12.42 Providing and fixing on wall face unplasticised - PVC

moulded fittings/ accessories for unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A,

including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.2 Single pushfit Coupler

12.42.3 Single tee with door

12.42.4 Single tee without door

12.42.6 Shoe (Plain)

32 12.44 Providing and fixing to the inlet mouth of rain water pipe

cast irongrating 15 cm diameter and weighing not less

than 440 grams. each 8.00 47.90 383.20

NBCC 5 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

33 12.45 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one

flange fixed to the ceiling with dash fastener 12.5 mm dia

x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I.

intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction

, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with

recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and

two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of

making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification

and direction of the Engineer in Charge but excluding the

cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant

34 13.1 12 mm cement plaster of mix :

35 13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

36 13.48A Finishing walls with 100% Premium acrylic emulsion

paint having VOC less than 50 gm/litre and UV resistance

as per IS 15489:2004, Alkali & fungal resistance, dirt

resistance exterior paint of required shade (Company

Depot Tinted) with silicon additives.

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10

sqm. Over and including priming coat of exterior primer

37 13.45 Finishing walls with textured exterior paint of required

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10

sqm) over and including priming coat of exterior primer

38 13.52 Finishing with Epoxy paint (two or more coats) at all

locations prepared and applied as per manufacturer’s

specifications including appropriate priming coat,

preparation of surface, etc. complete.

NBCC 6 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

39 13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

13.61.1 Two or more coats on new work sqm 90.00 131.45 11830.50

40 13.83 Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre of approved brand and

manufacture, including applying

additional coats wherever required to achieve even shade

41 13.85 Applying priming coats with primer of approved brand

and manufacture, having low VOC (Volatile Organic

Compound ) content.

13.85.1 With ready mixed pink or grey primer on wood work

(hard and soft wood) having VOC content less than 50

13.85.3 With water thinnable cement primer on wall surface

having VOC content less than 50 grams/litre sqm 2100.00 64.45 135345.00

43 13.99 Painting with synthetic enamel paint of approved brand

and manufacture of required colour to give an even shade

13.99.1 One or more coats on old work sqm 90.00 86.55 7789.50

44 13.111 Finishing walls with Acrylic Smooth exterior paint of

required shade :

13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)

on existing cement paint surface sqm 90.00 111.60 10044.00

45 13.114 Melamine polishing on wood work (one or more coat).

DISMANTLING AND DEMOLISHING

46 15.3 Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer - in- charge. Cum 4.50 2928.10 13176.45

47 15.5 Extra for cutting reinforcement bars manually/ by

mechanical means in R.C.C. or R.B. work (Payment shall

be made on the cross sectional area of R.C.C. or R.B. work)

as per direction of Engineerin- charge. sqm 18.00 947.10 17047.80

48 15.6 Extra for scrapping, cleaning and straightening

reinforcement from R.C.C. or R.B. work. kg 90.00 7.45 670.50

49 15.7 Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 60.30 1698.45 102416.54

50 15.12 Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats, architrave,

holdfasts etc. complete and stacking within 50 metres

15.12.1 Of area 3 sq. metres and below each 15.00 302.70 4540.50

51 15.13 Taking out doors, windows and clerestory window

shutters (steel or wood) including stacking within 50

15.13.1 Of area 3 sq. metres and below each 6.00 118.30 709.80

15.13.2 Of area beyond 3 sq. metres each 6.00 155.75 934.50

52 15.56 Dismantling old plaster or skirting raking out joints and

cleaning the surface for plaster including disposal of

rubbish to the dumping ground within 50 metres lead.

NBCC 7 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

53 15.57 Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including disposal

of unserviceable material and stacking of serviceable

material with in 50 meters lead as directed by Engineer-

54 10.1 Structural steel work in single section, fixed with or

without connecting plate, including cutting, hoisting,

fixing in position and applying a priming coat of approved

steel primer all complet kg 1300.00 93.05 120965.00

55 16.53 Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable

length ( total length 90 m), having 50 nos rounds per 6

metre length, upto 3 m height of

wall with existing angle iron ‘Y’ shaped placed 2.4m or

3.00 m apart and with 9 horizontal R.B.T. reinforced

barbed wire, stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I. barbed

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape(R.B.T.) /

Spring core (2.5mm thick) wire of high tensile strength of

165 kg/ sq.mm with tape (0.52 mm thick) and weight

43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be

paid separately)

56 22.7 Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc

consisting of following operations: a) Applying a slurry

coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645

and approved by Engineer-in-charge over the RCC slab

including adjoining wallsupto 300 mm height including

cleaning the surface before treatment.

b) Laying brick bats with mortar using broken

bricks/brick bats 25 mm to 115 mm size with 50% of

cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-

charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs

c) After two days of proper curing applying a second coat

of cement slurry using 2.75 kg/ sqm of cement admixed

with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge. d) Finishing the

surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge including laying glass fibre cloth of

approved quality in top layer of plaster and finally

finishing the surface with trowel with neat cement slurry

and making pattern of 300x300 mm square 3 mm deep. e)

The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for

final test. All above operations to be done in order and as

directed and specified by the Engineer-in-Charge

22.7.1 With average thickness of 120mm and minimum

thickness at khurra as 65 mm. sqm 90.00 1522.95 137065.50

NBCC 8 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

57 NS-1 Providing and fixing Factory manufactured modular

walldrobes made in 19mm thk both side prelaminated

bwr grade ply and 25mm thk prelaminated flush door

shutters as per following specifications:

Overall depth=600mm

Overall height=upto 2700mm

All verticle and horizontal surfaces of box shall be made in

19mm thk bwr ply cladded with 1mm thk laminate.

All visible edges of ply shall be covered with hot pressed

and glued 2mm thk pvc edge binding tape of matching

Back of cabinet shall be 12mm thk both side prelaminated

particle board.

Two number side by side Drawers made in 19 mm thk

ply, laminated with 1mm laminate running on telescopic

channels shall be provided.

Two number side by side shoe rack Drawers made in 19

mm thk ply, laminated with 1mm laminate running on

telescopic channels shall be provided.

One number 25mm dia chrome plated rod for hanging

clothes shall be provided.

2-4 number shutters made of 25mm thk flush door,

laminated with 1mm thk high gloss/textured laminate on

front face and 1mm thk laminate matching with box on

All visible edges of shutter shall be covered with hot

pressed and glued 2mm thk pvc edge binding tape of

matching color eith front face of cabinet.

The shutters shall be fixed to frame with appropriate auto

closing hinges of approved make.

2-4 number 600mm high stainless steel handles of

approve shape/ make.

Two/Four number 300mm high stainless steel handles of

approve shape/ make.

The work shall be carried out as per detail drg. including

cost of horizontal shelves made in 19 mm thk ply,

laminated with 1mm laminate on both sides and edges

covered with 2mm thk pvc edge binding tape to the entire

satisfaction of engineer incharge.(Only front face of

cabinets shall be measured for payment purpose)

* Contractor shall submitt shop drawings for approval

before execution of the work.

58 NS-2 Providing and fixing modular kitchen made in 19mm thk

both side factorylaminated bwr grade ply and 19mm thk

bwr grade ply factory laminated shutters as per following

specifications: each 1.00 425000.00 425000.00

1 Below counter cabinets:

Overall depth=600mm

Overall width=7200mm-7800mm( front face)

Overall height=upto 825mm

All verticle and horizontal surfaces of box shall be made in

19mm thk bwr ply cladded with 1mm thk laminate.

All visible edges of ply shall be covered with hot pressed

and glued 2mm thk pvc edge binding tape of matching

Back of cabinet shall be 12mm thk both side prelaminated

particle board.

Shutters made of 19mm thk bwr ply , laminated with

1mm thk high gloss/textured laminate on front face and

1mm thk laminate matching with box on inside.

All visible edges of shutter shall be covered with hot

pressed and glued 2mm thk pvc edge binding tape of

matching color eith front face of cabinet.

The shutters shall be fixed to box with appropriate auto

closing hinges of approved make.

Shutters shall have 200mm- 300mm stainless steel

handles of approved shape/ make.

NBCC 9 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Cabinets shall stand on floor with height adjustable pvc

Cabinets shall have appropriate high aluminium skirting

fixed to pvc legs with clips

Work shall include cutting holes for gas pipe line.

Accessories in S.S.304 grade:

Two number vertical pull outs for 150mm-300mm wide

One pull out grain trolley for upto 450mm- 600mm wide

Six number baskets of varous sizes for upto 450mm-

600mm wide cabinets

One 3/4 round corner unit with two number shelves.

One PULL-OUT WASTE BIN (Under Sink)

One PULL-OUT DETERGENT RACK. (Under Sink)

One cylinder trolley.

16mm-18mm granite stone of approve shade fixed to

cabinets with Araldite with all edges half rounded and

polished to mirror finish.

Stainless steel double bowl sink with drainboard of

approved size /make shall be provided as per detail

2 Above counter cabinets:

Overall depth=375mm-400mm

Overall width=6600-7200mm (front face)

Overall height=upto1200mm

All verticle and horizontal surfaces of box shall be made in

19mm thk bwr ply cladded with 1mm thk laminate as per

All visible edges of ply shall be covered with hot pressed

and glued 2mm thk pvc edge binding tape of matching

Back of cabinet shall be 12mm thk both side prelaminated

particle board.

Shutters made of 19mm thk BWRply, laminated with

1mm thk high gloss/textured laminate on front face and

1mm thk laminate matching with box on inside.

All visible edges of shutter shall be covered with hot

pressed and glued 2mm thk pvc edge binding tape of

matching color eith front face of cabinet.

The shutters shall be fixed to frame with appropriate auto

closing hinges of approved make.

200 mm-300mm high stainless steel handles of approved

Accessories in S.S.304 grade:

One set of glass trey/plate trey for 750mm-850mm

babinet size above sink.

chimney with following specifications:

Suction Capacity: 1180 m3/h

Air Outlet Ø: 150 mm

Noise Level: 59 dbA (Max)

Filter: Aluminium filters

Lamps: 2x40 watts

Finish: S. Steel

Conveyor : PDCA

Controls : 3 Speed Push Buttons

PVC Exhaust pipe 150 MM dia upto a length of 4500mm

complete with accessories like bends, end caps etc.

* Contractor shall shop drawings for approval before

execution of the work.

59 NS- 3 Providing and fixing of Diace (stage) made out of under

structure 18mm thick ply / Pine wood and hard top with

18mm thick ply and covered with 8mm thick loop pile

carpet. Fixing and laying with manufacturer

recommended adhesive etc. all complete.

NBCC 10 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

60 NS-4 Providing and fixing aluminium work for doors, windows,

ventilators, sliding windows and partitions with extruded

built up standard powder coated tubular sections/

appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight,

mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing

/ paneling, C.P. brass / stainless steel screws, all complete

as per architectural drawings and the directions of

Engineer-in-charge. Glass to be paid separately. Cost shall

include all hardware and locking arrangement complete

61 NS-5 Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with PVC/ neoprene

gasket etc. complete as per the architectural drawings and

the directions of engineer-incharge.(Cost of aluminium

snap beading shall be paid in basic item)

a 6mm thick thoughened glass with light transmission 56,

External refelection 15, Internal refelection 18, solar

factor .5, U-Value (W/sq.m-K) 5.6 , Shading Coefficient .58

62 NS-6 Providing and fixing Fly proof stainless steel grade 304

wire gauge with 0.5 mm dia. wire and 1.4 mm wide

aperture in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the

directions of engineer-in-charge .

63 NS-7 Cutting linear groove of 3mmx3mm on staircase tread

near nozing of existing granite flooring neatly without

damaging the stone, cleaning and making good etc.

64 NS-8 Providing and fixing Glass Reinforced Concrete (G.R.C)

Screens/Panels in THICKNESS (50-60mm), approved size,

pattern, design and color . The Screens should be made

from ‘53 grade’ White Portland Cement manufactured by

‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali

Resistant Glass Fiber manufactured by ‘Saint Gobain’ or

equivalent, Super Plasticizers manufactured by ‘BASF’ or

equivalent, Polymers manufactured by ‘BASF’ or

equivalent and U.V resistant Synthetic inorganic pigments

should be used for pigmentation manufactured by

‘BAYFERROX (Germany)’ . The material casting should

take place in Synthetic Rubber / FRP Mould manufactured

by ‘Reckli’. Framework for fixing shall be paid separately.

65 NS-9 Providing and fixing street furniture benches in desired

design/size made out of stainless steel and deck wood

complete in all respect including welding , grinding , nut

bolts etc. complete in all respect

a Stainless steel 304 grade structure made out of KG 350.00 750.00

tubes/bars/plates/angles/channels etc in desired

profile/shape as per detail drawing. 262500.00

b Providing & Fixing of WPC composite deck of size 146 SQMT. 25.00 5,500.00

mm x 24mm x 2400mm in desired shade. The deck should

be manufactured using minimum 50% Wood fibre and

advanced UV protection agents and additives. The deck

panels have to be installed using stainless hidden

fastening system. 137500.00

NBCC 11 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

66 NS-10 Providing, making, fixing & anchoring of reinforcing bars

or dowels or rebar including drilling the holes, fixing the

bars and grout the bar with Hilty Hit - HY200 grouting

chemical ,all labours, all tools &plants, necessary

scaffolding, etc but excluding the reinforcement steel

completed for all lead & lift as per directed by Engineer

Incharge /Structural consultants or Architect.

C ELECTRICAL WORK

1 NS-1 Supply and wiring for Primary Light Points For Switch

Controlled Points With 1.5 sq. mm PVC insulated stranded

/ multistranded copper conductor 1100 Volt grade wires

in FR PVC surface conduit including cost of providing

saddles hangers supports from soffit of slab etc for

surface conduiting, ceiling conduiting and/or cost of

cutting and filling chases for recessed conduiting, and

including the cost of providing and fixing a 6 amp 240

Volt grid plate mounted switch with moulded cover plate

in zinc chromate passivated FR PVC box and including the

cost of running 1.5 sq. mm PVC insulated copper earth

wire for loop earthing etc. complete as per specifications

and as required.Including circuit wiring upto DB with 1.5

sq mm wire for each circuit. EACH 20 1450 29000.00

2 NS-2 Supply and wiring for Secondary Light Points With 1.5 sq.

mm PVC insulated stranded/multistranded copper

conductor 1100 Volt grade wires in surface/concealed FR

PVC conduit including cost of providing saddles hangers

supports from soffit of slab etc for surface conduiting,

ceiling conduiting and/or cost of cutting and filling chases

for recessed conduiting including the cost of running 1 sq.

mm PVC insulated copper earth wire for loop earthing

complete as per specification and as required. EACH 20 650 13000.00

3 N.S. Supply and wiring for Primary Light Points for MCB

Controlled Points With 1.5 sq. mm PVC insulated

stranded/multistranded copper conductor 1100 Volt

grade wires in FR PVC surface/concealed conduit

including cost of providing saddles etc for surface

conduiting and/or cost of cutting and filling chases for

recessed conduiting and including the cost of running 2.5

sq. mm PVC insulated copper earth wire for loop earthing

etc. complete as per specifications and as required. EACH 10 1500 15000.00

4 NS-3 Supply and wiring for Secondary Light Points With 1.5 sq.

mm PVC insulated stranded/multistranded copper

conductor 1100 Volt grade wires in surface/concealed FR

PVC conduit including cost of providing saddles hangers

supports from soffit of slab etc for surface conduiting,

ceiling conduiting and/or cost of cutting and filling chases

for recessed conduiting including the cost of running 1.5

sq. mm PVC insulated copper earth wire for loop earthing

complete as per specification and as required.(To be

looped with item no.3 above). EACH 20 600 12000.00

NBCC 12 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

5 NS-4 Supply and wiring for a 5 pin 240 volt 6 amp Switch

Socket Outlet single phase and neutral switch socket

outlet with 1.5 sq. mm PVC insulated

stranded/multistranded copper conductor 1100 Volt

grade wires in 25 mm dia FR PVC surface/concealed

conduit including cost of providing saddles etc as

required for surface conduiting and/or cost of cutting and

filling chases as required and providing and fixing of a

combined 5 pin 240 volt 6 amp socket outlet with safety

shutters and 6 amp 240 volt single pole grid plate

mounted switch with moulded cover plate in recessed

zinc chromate passivated FR PVC box and including

earthing of the 3rd pin with 1.5 sq. mm PVC insulated

copper earth wire conductor wires complete as required.

( RAWPOWER OUTLETS)

6 NS-5. Supply and wiring for 6 pin 240 volt 16 amp Switch

Socket Outlet single phase and neutral switch commercial

socket outlets (1 outlet wired on 1 circuit) with 2.5 sq.

mm PVC insulated stranded/multistranded copper

conductor 1100 volt grade wires in 25mm dia FR PVC

Surface/concealed conduit including cost of providing

saddles etc as required for surface conduiting and/or cost

of cutting and filling chases as required and including

providing and fixing of a 6 pin 240 volt 16 amp socket

outlet with safety shutters and 16 amp 240 volt single

pole grid plate mounted switch with moulded cover

plate in a recessed zinc chromate passivated FR PVC box

including earthing of the 3rd pin with 4.0 sq. mm 1100

volt grade PVC insulated stranded/multistranded copper

earth wire complete as required ( RAW POWER GENERAL

7 NS-6 Providing and fixing in position of FRLS PVC Heavy duty

conduit including bends, junction boxes, pull boxes, GI

pull wire including necessary civil work such as chase

cutting, chipping, making good for recessed conduiting or

clamping on surface with saddles, clamps etc. for surface

a 20mm dia, 2mm thick FRLS PVC Heavy duty conduit. M 60 80 4800.00

b 25mm dia, 2mm thick FRLS PVC Heavy duty conduit. M 60 110 6600.00

c 32mm dia, 2mm thick FRLS PVC Heavy duty conduit. M 60 145 8700.00

Supplying, Installation, Testing and Commissionig of

integral decorative LED wall luminair of 40 watts in

desired color and finish complete in all respect, IP20

classificaton. The life cycle of fixture including driver as

recomded by manufacturer complete as required. EACH 20.00 5000.00 100000.00

Supplying, Installation, Testing and Commissionig of

integral decorative LED hanging luminair of 60 watts in

desired color and finish complete in all respect, IP20

classificaton. The life cycle of fixture including driver as

recomded by manufacturer complete as required. EACH 4.00 25000.00 100000.00

D PLUMBING WORK

1 NS-1 Providing and fixing bath tub with whirlpool system as

per following specifications: EACH 2.00 180000.00 360000.00

Lucite Acrylic Bathtub with Stainless Steel Frame

size:1800x1200x600mm

Pneumatic Control to Operate Whirlpool System and

8 Hydromassage Jets

1250 W Highly Efficient Koller Motor for Water Massage

Chromotherapy Lights

NBCC 13 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Automatic Pop-up Waste

Earth Leakage Circuit Breaker

The work shall include cost of appropriate cpvc

watersupply pipeline work(concealed or surface as

required) from terrace/water heater to inlet of tub. The

work shall be carried out by company authorized plumber

only. All piping work shall be carried out as per CPWD

specifications. Contractor shall submit detailed shop

drawings for piping and installation as per available site

conditions for approval before execution of work.

2 NS-2 Providing and fixing shower panel system as per

following specifications: EACH 4.00 55000.00 220000.00

304# Stainless Steel Wall Mounted Shower Column with

Matt Finish of size: 1400x200mm

Overhead Shower

Thermostatic Diverter & Mixer

Matt Finished Rectangular Hand Shower

3 Moveable Rectangular Body Jets

The work shall include the cost of appropriate cpvc

watersupply pipeline work(concealed or surface as

required) from terrace/ water heater to inlet of shower

panel. The work shall be carried out by company

authorized plumber only. All piping work shall be carried

out as per CPWD specifications. Contractor shall submit

detailed shop drawings for piping and installation as per

available site conditions for approval before execution of

3 NS-3 Providing and fixing glass shower cubicle as per

following specifications: sqmt 12.00 12500.00 150000.00

8 mm Toughened Transparent Glass with Anti scale

25X25 mm square mirror finish bar made up to 304 ss

Chrome plated brass hinges design to carry load up to 45

304ss towel bar type square shape designer door handle

Mirror finish 304ss very strong glass connecter.

Contractor shall submit detailed shop drawings for piping

and installation as per available site conditions for

approval before execution of work.

1 NS-1 Designing , Providing and Fixing Mural in mix media with

components and composition as follows at heights above

4mts & upto 20m from finished floor lvl. complete in all

respect includung the cost of scaffolding etc. to the entire

satisfaction of Engineer Incharge

a Fibre glass artwork in relief ,duly painted with exterior

weather proof paints as per design fixed to wall with

necessory required arrangement (50% to 60% of overall

b Glass Mosaic tile or ceramic tile in cutwork in cement

sand mortar 1:2 or richer mix as required as per design

(20% to 30% of overall area)

c Texture coating rustic finish 2mm to 3mm Thick as per

design (10% to 15% of overall area)

d Border of artwork with Stainless Steel 304 grade Steel

tube of size approx. 150mmX 75mmX 4mm

* The contractor along with its specialized agency shall take

instructions from client/architect, submit designs in 2D

and 3D format for approval before execution of the work.

NBCC 14 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

2 NS-2 Designing , Providing and Fixing 3D artwork in Stainless

steel 304 grade moulded shapes, profiles, tubes, flats

,plates etc in required thickness as per Detail Drawing

including cost of cutting SS Sheet with laser, welding,

grinding concrete foundation etc. complete in all respect

to the entire satisfaction of Engineer Incharge.(for

payment purpose only weight of S.S. members shall be

The contractor along with its specialized agency shall take

instructions from client/architect, submit designs in 2D

and 3D format for approval before execution of the work.

3 NS-3 Designing, Providing & Fixing designer signage in

stainless steel letters made out of 1.2 mm thick stainless

steel sheet with concealed fixing arrangement in desired

finish & font type upto 25mm thick size bending complete

in all respect. (for measurement purpose height of letters

to be measured)

* The contractor along with its specialized agency shall take

instructions from client/architect, submit designs in 2D

and 3D format for approval before execution of the work.

4 NS-4 Designing ,Providing and fixing wall décor for interiors

spaces to the entire satisfaction of Client/Architect as per

following specifications :

a Wall décor printed on canvas , mounted on appropriate

concealed wooden frame of size :

b Wall décor printed on Photoquality paper, mounted on

appropriate thickness MDF board, framed with

appropriate thichness glass and moulding of size :

c Indoor/ Outdoor Wall décor made out of combination of

appropriate thickness finished sheets & profiles of metal

like copper/bronze/stainless steel/Mild steel,

appropriate GSM translucent mulbery /unryu

paper(bleached or unbleached)/appropriate thickness

acrylic sheet(colored) mounted on concealed wooden

/mild steel frame as per design. The decor shall be backlit

with appropriate LED light (having very low power

consumption ) with batteries. An option of AC power

supply shall be additionally available. per sq

* The contractor along with its specialized agency shall take

instructions from client/architect, submit designs in 2D

and 3Dformat(in case of subhead C of above item) for

approval before execution of the work.

Note: The rate of above items in this subhead is inclusive

of scaffolding and work at any heights complete in all

F AIRCONDITIONING

NBCC 15 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

1 NS-1 2 TR Cooling Only Inverter 3 Star Split AC - BEE STAR

Supply and installation of wall mounted type Air cooled

Split Air Conditioner system suitable for working between

120 - 290V (inbuilt with high / low voltage cut-off) each

comprising an outdoor unit consisting of hermetic Dual

Inverter compressor, air cooled condensing unit,

condenser fan with Inverter motor, Indoor and Outdoor

Heat Exchanger shall be provided with factory supplied

corrosion resistant Ocean Black Type coating on Coil and

Fins, 100% capacity at 43 Deg C & should provide more

than 80% capacity at 48 Deg C, Low Refrigerant Detection

sensor, with outer casing electrical accessories and

indoor fan coil unit(s) consisting of fan, fan motor, DX

cooling coil, drain pan, washable type prefilter, outer

casing, control and power panel with remote control etc.

10 Years Warranty on Compressor & 5 Years on PCB. The

unit shall be supplied with Kit.

2 NS-2 1.5 TR Cooling Only Inverter 5 Star Split AC BEE STAR

Supplying of wall mounted type Air cooled Split Air

Conditioner system suitable for working between 120 -

290V (inbuilt with high / low voltage cut-off) each

comprising an outdoor unit consisting of hermetic Dual

Inverter compressor, air cooled condensing unit,

condenser fan with Inverter motor, Indoor and Outdoor

Heat Exchanger shall be provided with factory supplied

corrosion resistant Ocean Black Type coating on Coil and

Fins, 100% capacity at 43 Deg C & should provide more

than 80% capacity at 48 Deg C, Low Refrigerant Detection

sensor, with outer casing electrical accessories and

indoor fan coil unit(s) consisting of fan, fan motor, DX

cooling coil, drain pan, washable type prefilter, outer

casing, control and power panel with remote control etc.

10 Years Warranty on Compressor & 5 Years on PCB.

1.0 TR Cooling Only 5 star Window AC ISEER 3.5 - DUAL

Inverter with Ocean Black Protection, Top Air Discharge

Clean Filter Indication, Stabilizer Free Operation, Low Gas

Detection , Noise Level 44 dB & Wifi compatible

* Note- The rate of above item is including the cost of

installation, wiring, copper piping , mounting stand,

drilling required holes in brickwork or concrete, fasteners

etc. and filling any gaps in window frame around AC with

particle board, making good complete in all respect at all

heights and levels.

1 NS-1 DOUBLE BED WITH SIDE TABLES FOR SUITE ROOMS

a Providing and fixing Bed of Overall top Size:1850W

x375H x1850D(mm):, Box outer size1500W x375H

x1650D(mm) Material:Bed box Structure shall be made

out of 19mm thk BWR grade ply, vneer , teakwood

beading and hydraulic lift of 50 kg capacity as per detail

drawing no. AR/TD/BW/NIDM R-02, Inside of box shall

be cladded with 0.6mm laminate. The bed shall have

removable headboard made out of 19mm ply wood,

cladded with desired colored leatherite wrapped on

50mm high density foam and vneer. All visible wooden

surfaces shall be polished with melamine matt polish ,

complete in all respect

NBCC 16 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

b Providing and fixing Bed side table of Overall top

Size:50W x375H x400D(mm) with two number drawers

and ss handles made out of 19mm thk BWR grade ply,

vneer, teakwood beading etc. as per drawing

no.AR/TD/BW/NIDM R-02, All visible wooden surfaces

shall be polished with melamine matt polish, inside of

drawers to be cladded with 0.6mm laminate , complete in

all respect. EACH 58.00 6000.00 348000.00

2 N.S. SET OF TWO SEATER SOFA +CENTER TABLE+CORNER

TABLE FOR SUIT ROOMS

a Provide and Placing two seater sofa with seats of sice

525mm x525mm, arms and back in desired colored

upholdstery. The sofa shall have high quality foam infill

and seats. Frame shall be made out of hardwood, wooden

legs, complete in all respect . EACH 120.00 24000.00 2880000.00

b Providing and Placing Centre Table:-

Size 1200 mm wide x 600 mm depth x 450 mm

height.Center Table with 8mm thick Clear Glass top,

Under-structure made out of teakwood duly polished

c Providing and Placing Corner Table::-Primary Material 8

mm Tempered Glass glass, square shape, size : 600 x 600

3 NS-2 MATRESSES

a SINGLE BED 5"- Providing and placing Posture plus

Mattress size: 72LX48WX6T,Combination of High Density

(50 D) PU Foam Layer on Top for high level of cushioning

and support which is high resilient in nature and Bonded

Foam in the base for support encourage the right

posture.High thickness PU foam on the top used for

warmth and cushioning.Top Bottom Fabric

different.Single side Usable. EACH 49.00 8500.00 416500.00

DOUBLE BED 5"- Providing and placing Orthomatic

Delux 36L x 72W x 5T with Complete Bonded Foam used

to provide adequate and firmness, mattress should use 40

GSM premium knitted fabric to provide aesthetic look and

appeal,Designed after intensive research to keep all

orthopaedic problems at a bay,Perfect for sound sleep

devoid of stiffness and muscular discomfort,Both sides

usable,Top Bottom Fabric same.

4 NS-3 Providing and Fixing wooden partitions in officers cabin

made out of 12mm thk BWR grade plywood , vneer,

teakwood etc. as per Deatail drawing no.

AR/TD/BW/NIDM R-01 To the entire satisfaction of

Engineer in charge. EACH 12.00 35000.00 420000.00

H FURNISHING WORKS

1 NS-1 Providing and fixing of Manual Operated Roman Blinds

In stitch less finish fashions with translucent lining /

blackout lining backing fabrics in order to ensure better

privacy maintaining the elegance in desired shade and

pattern of fabric complete in all respect as per following

specifications: sqmt 350.00 4500.00 1575000.00

1 Hardware Details:

a Control Unit with Clutch Mechanism:

The control unit is made of high strength reinforced

plastic. The clutch is of warp spring design. High carbon

steel springs are provided to transmit motion from the

driven mechanism. Clutch is operated directionally by the

use of beaded chain to raise and lower the blind smoothly

to decide height. Clutch never needs adjustment

b Head rail Channel + Casing:

NBCC 17 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Aluminum-extruded rail on which control unit and spool

are housed and mounted with help of brackets. Powder

coated in white. Velcro is pasted on the head rail groove

which fastened firmly with the opposite Velcro surface

stitched on the top of the fabric. Size of head Rail – 32mm

wide, 36mm height and thickness is 1mm Alloy-6063-T6

Weight-0.360 Kg/meter.

c Ceiling Rail:

This is Aluminum Extruded Rail made up of High Strength

Aluminum alloy, Which is Powder Coated in White. Size:

75.6 X 12 mm; weight= 480gms/running mtr.

d Hexagonal Tilting Rod:

Aluminum-extruded hollow hexagonal rod is of size 7mm

is integrated with the control unit to rotate the spool.

Brackets for mounting Head Rail Spring loaded brackets

of steel with zinc plated can be mounted on wall or ceiling.

e Operating chain:

This is made of 4.5 mm plastic beads molded on 1.5 mm

thick polyester cord. The pitch of the beads is6mm. The

chain drives the sprocket fixed in the end control unit to

close and open the blind. The pitch of the chain

corresponds to the sprocket in perfect match for trouble

free operation.

f Cord Weight:

Made up of ABS, the blind cord weight is a tensioner

device to keep the bottom of the chain loop straight

Made up of high strength polymer is housed inside the

head rail to swirl the pulling cord which raise or lower

Powder coated MS Rod of 7mm with PVC end caps

inserted in the pocket at the bottom of the blinds fabrics

i Pulling Cord :

White color pulling cord of 0.3mm diameter is fitted on

the spool passes through SS rings stitched on the fabric

meant for raising the blind in the form of roman fold

j Reinforcement Bar:

It is an extruded high strength aluminum alloy profile

being used as reinforced bar for the stitch less roman

k End Cap for reinforcement bar:

It is made up of high strength plastic & it is fitted at both

the ends of reinforcement bar.

It is an acrylic bar of 2.5 mm dia. being inserted inside the

reinforcement bar to lock the fabrics.

m Acrylic Ring-:

A specialized shaped acrylic ring fitted to the

reinforcement bar through which pulling cords passes for

lowering and raising the blind.

2 Fabric Composition:

a Polyester / Cotton Max. fabric width upto 1.80 Meters

2 NS-2 Accessories like wall clock, carpet and dustbin for guest

a Providing and fixing battery operated round shaped wall

clock of dia approx 15" in desired color and design to the

entire satisfaction of engineer incharge Each 70.00 3000.00 210000.00

b Providing round shaped dustbin of dia approx 8" to 12"

and height upto12 " to 15" in stainless steel construction

cladded with leatherite in desired color and design to the

entire satisfaction of engineer incharge

NBCC 18 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

c Providing customised heat set designer rug of size 5'x7'

made of 100% polyester with pile height of 10mm in

desired color and pattern. Each 8.00 15000.00 120000.00

3 NS-3 Providing and placing bed sheets and two number in

100%spun cotton in plain and textured patterns in

a DOUBLE BED( size:2500x2500mm )minimum. EACH 76.00 5750.00 437000.00

b SINGLE BED( size:1500x2250mm )minimum. EACH 100.00 3300.00 330000.00

4 NS-4 Providing and placing slumber memory foam pillows of

size 700x450 mm minimum EACH 176.00 1750.00 308000.00

5 NS-5 Providing and placing 100% spun cotton comfortor in

plain and textured patterns in desired color.

b DOUBLE-size: 2550x2200mm EACH 57.00 6500.00 370500.00

6 NS-6 Providing and placing winter quilts in plain and textured

patterns in desired color.

b DOUBLE-size: 2550x2200mm EACH 57.00 6000.00 342000.00

I ELECTRICAL & ELECTRONICS EQUIPMENTS

1 NS-1 Supply,Installation,Testing&Commissioning of 1Chip-

DLPLaserProjector,WUXGANativeResolution,12000ANSIlu

mensBrightness,20000 hours lamp life,Dynamic Contrast

Ratio of 7500:1, projector mount and long throw lens if

required complete etc. as required.

* The above projector is to be intalled in already

functioning Auditorium and seminar halls. The cost shall

include integeration of the projector with existing system,

required wiring and cabling, extra HDMI cable for

redundancy ,scaffolding and making good the existing

works after installtion. Any damage to any other item

shall be replaces/rectified by the contractor only.

Engineer Incharge reserves the full right to deduct

appropriate amount from running/final bill of contractor

in case contractor fails to execute such

replacements/rectifications.

2 NS-2 190 liter fridge for dining area-GL-B201RPZD- 190 L , 3

star-- Single Door REF, Stabilizer Free, Toughened Glass

Shelves, Anti- Rat Bite. EACH 2.00 17500.00 35000.00

3 NS-3 320 liter deep freezer for dining area kitchen admin EACH 2.00 28500.00 57000.00

55" LED TV for Reception - 55" Smart UHD TV with

CMS|In built Wifi| Screen Share|Blutooth Support|Group

Manager|WEB OS| 400 Nits|Operational Hours-16 Hours

5 NS-5 40" LED TV in all rooms. 40" HD Essential Commercial

TV, Quick Menu, IR Out, USB Cloning, Welcome video and

Image, HDMI, RS232 , Audio Out ,Compatibility with AV

Control Systems, In buily speakers

6 NS-6 Providing and Fixing 6 Way Swivel Tilt TV Wall Mount For

LCD/LED TV's of size Upto 32" To 55" Inch including the

cost of all screws ,fasteners etc. EACH 107.00 3750.00 401250.00

NBCC 19 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

OUTDOOR CHILDREN PLAY AREA AND OPEN GYM

1 NS-1 Providing and fixing following outdoor children play area

equipment as per manufacturers specifications including

any required civilwork at site complete in all respect in

desired color scheme.

a Multi play Station (26 X 16 X 13 ft.) containing :

1 no.'s wave slide with gate 1200mm ht.,

1 no.'s double slide with gate 1500mm ht.,

1 no.'s fish scale canopy,

1 no's rabbit panel, are made of LLDPE rotational

molded multicolor virgin plastic UV,

O2 & Anti static resistant.

1 no.'s 2 seater swing attached to multi play station

1 no's square platform at 1200mm ht. ,

1 no.'s square platform at 1500mm ht.,

1 no.'s spiral climber 1500mm ht. are made up of 2mm

thick galvanized sheet precision punched hole of 8mm dia

mounted are made up of 2mm thick

galvanized sheet precision punched hole of 8mm

diameter mounted with the help of 6 no.'s 114 mm

diameter galvanized pipe.

1 no.'s easy step ladder are made up of 2mm thick

galvanized sheet precision punched hole of 8mm dia

& 2 no.'s hand rails of easy step ladder.

1 no.'s metal railing are made up of 2025 NB GI pipe.

All metal parts are pure polyester powder coated in

multicolor for dazzling and attractive look

Double arch swing legs pipe 90mm & top pipe is also

90mm galvanized pipe with specially designed casted

bearing assembly for friction free swing movement. 2 nos.

flat seat of swing made of pvc injection moulded with pvc

coated chain suspension . All metal parts are pure

polyster powder coated in multicolours for dazzling and

attractive look EACH 1.00 46827.82 46827.82

c SEA SAW Size - 6.30 x 1.15 ft. 2 seater sea saw consist of

stand pipes made up of 90 mm gi 0.5o mtr high from

ground level with 1 nos sea saw planks of 90mm gi of 2.0

mtr long pipe comprised with two nos blow moulded &

PE Sheet horse shape seats, one nos ms solid bearing shaft

with specially designed twin ball bearing assembly for

smooth movement. All welded joints are well grinded and

chemically cleaned before powder coating. All metal parts

are pure polyster powder coated for dazzling and

attractive look.

3 NS-2 Providing and fixing following outdoor open gym

equipment as per manufacturers specifications including

any required civilwork at site complete in all respect in

desired color scheme.

a Waist Trainer/Triple Twister Function: Train waist joints

and enhances their flexibility and the ardiopulmonary

function. Instruction: Hold the handrail with both hands

(distance between hands same as distance between

shoulders) and stand on turn-disc, lean upper body

forward slightly and twist the lower body clockwise and

anticlockwise. EACH 1.00 67500.00 67500.00

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm

Thickness-10mm.

NBCC 20 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Function: Hip and ankle joints, strengthen the flexibility

of muscles group and enhance the cardiopulmonary

function. Instruction: Holds

the handle with hands, step on the two footboards, move

two legs back and forth simultaneously and continuously

Specifications:

Main pipe Dia-114 mm.,

Base plate Dia-200mm.,

Thickness-10mm.

c Double Cross /Single Pole Walker

Function: Activate upper and lower limbs and waist

joints; strengthen the flexibility of the muscles group and

the cardiopulmonary function. Instruction: Hold the two

handles and step on the two footboards, push and pull the

handles repeatedly with the feet simulating sliding.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm. Powder coated

d Exercising/Parallel Bar

Function: Enhance the muscles strength of upper limbs,

shoulders, chest and the back. Instructions: With both

hands grip tightly on the horizontal bar, lift the body up

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

e Elliptical Trainer/ Cross trainer

Function: Activate upper and lower limbs and waist

joints, strengthen the flexibility of the muscles group and

the cardiopulmonary function. Instructions: Hold the two

handles and step on the two footboards, push and pull the

handles repeatedly with the feet simulating sliding.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

f Arm Wheel Big Turning wheel

Function: Train wrist, elbows shoulders, and waist, and

enhance their flexibility and the cardiopulmonary

function. Instruction: Use one hand to grasp and one

handle of the wheels and tum the wheels clockwise or

anti clockwise then change hand and repeat the

movement. Or grasp the handle of a wheels at the same

time and tum the body continuously.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

NBCC 21 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

g Seated Chest Press/Push Chair

Function: Enhance the muscles strength of upper limbs,

chest and the back. Instruction: Sit on the seat planed

with facing inward or outward, hold the pull down the

handles, hold a moment and the return slowly to original

position. Repeat the cycle. EACH 1.00 95000.00 95000.00

Specifications:

Main pipe Dia-114 mm.,

Base plate Dia-200mm.,

Thickness-10mm.

h Surfing Board /Mini ski

Function: Activate and strengthen the waist joints,

enhance the cardiopulmonary function. Instructions: Step

on the footboard, hold the two handles, utilized the

strength of waist to move the legs like a pendulum.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm

Thickness-10mm.

Function: Train waist, abdomen joints and lower body,

enhance their flexibility, leg power and cardiopulmonary

function. Instructions: Sit on the seat plank tread onto the

footboards and stretch the legs, hold a moment at the max

stretch then release the stretch slowly. Repeat the actions.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

j Rowing Machine(Self-Weighted Rower )

Function: Enhance the muscles strength of upper & lower

limbs, chest and abdomen. Instructions: Sit steadily on

seat plak tread on footrest, and pull the handles like

rowing aboat . EACH 1.00 52000.00 52000.00

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

k Double Pull/Shoulder Chair

Function: Enhance the muscles strength of upper

limbs,chest and the back. Instruction: Sit on the seat

planed with facing inward or outward, hold the pull down

the handles, hold a moment and the return slowly to

original position. Repeat the cycle. EACH 1.00 95000.00 95000.00

Specifications:

Main pipe Dia-114 mm.,

Base plate Dia-200mm.,

Thickness-10mm.

l Sit-up Trainer EACH 1.00 52000.00 52000.00

Function: Strengthen the abdominal muscles.

Instruction:Lie down on the camber and hook the feel at

the rung put the hands behind the head. Use abdominal

muscles to sit up and return to original position. Repeat

NBCC 22 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.

Thickness-10mm.

J Horse Rider EACH 1.00 48000.00 48000.00

Function: Active body joints and strength the flexibility of

the muscles group and the cardiopulmonary function.

Instruction: Sit and holds the two handles, put the feet

onto footboards, utilized own weight to pull and stretch

on legs and then return to sit position repeat the cycle.

Specifications:

Main pipe Dia-114mm.,

Base plate Dia-200mm.,

Thickness-10mm.

Function: Enhance cardiovascular health and motion of

legs.Instruction: Sit upright on the chair and hold the

handle bars in front. Using your legs, spin the pedals

provided for a cardio movement.

SPECIFICATIONS : Main pipe Dia-127mm.,

Base plate Dia-200mm.,

Thickness-10mm.

2 N.S. P & F outdoor synthetic sports flooring for

Badminton/Volleyball/ Basketball courts as per following sqmt 200.00 3000.00

specifications: 600000.00

Base Preparation

Soil Treatment : Full treatment of soil with anti – termite

chemical. Carry out anti termite and weed cite on the total

area by making 9” deep holes spaced 12” apart and

injecting the chemicals and also spraying.

Excavation to a depth between 6” as required to remove

all weeds and grassfrom its roots, create a slope in the sub

base from the centerline towards the lower end, back fill

with goods earth as required any grass of weeds and

properly sieved) Extreme care would need to be taken to

ensure a correct slope of 1” in every 10’ .

Compaction of sub-base will be 8-10 ton

roller to achieve 95% proctordensity.

Lay one layer of 4” compacted water boud macadam with

stone size of 50mm-30mm well graded WBM to be

density compacted by keying and interlocking the stones

to ensure that no settlement taken place.

Lay a 30mm compacted thick Hot Mix M course with

12mm chips well

graded up to 10mm and 5% stone dust. Use Bitumen

80/100 grade 4% by wt. of the mix. Compact preferable

with 8-10T. Roller. Use 1 Kg/m2 or hot bitumen as tack

cost before laying. HOT Mix Slope to be maintain 1” in 10’

and ensure a flat and level surface. Lay a 20mm

compacted thick Hot Mix A.C. course with 6 mm down

chips well graded up to 2 mm size with 10% stone dust

and finely powdered lime. Use Bitumen 80/100 grade 5 to

5.5% by wt. for the Hot Mix use 0.75 Kg/Sqm. For Track

ACRYLIC OR SYNTHETIC FLOORING FOR OUTDOOR ITF

Approved 5 Layer System 1 st Layer Resurfacer, 2 nd and

3rd Dense Cushion Layers and 4th and 5th layers of

Acrylic Colours and Game Marking

K SIGNAGES WORK INSIDE/OUSIDE THE BUILDING

NBCC 23 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

1 NS-1 Providing & Fixing of 20 gauge Stainless Steel plates of

grade 304 engraved with approved matter single side

writing all complete as per sample approved and fixed

with stainless steel srew/ double side tape of 3M make

required nos of holes, wherever required complete as per SQ

direction of Unit Incharge. Inch 4000 12.00 48000.00

2 NS-2 Providing & Fixing of 20 gauge Stainless Steel plates of

grade 304 engraved with approved matter both sides

writing all complete as per sample approved and fixed

with stainless steel srew/ double side tape of 3M make

required nos of holes, wherever required complete as per SQ

direction of Unit Incharge. Inch 4000 17.00 68000.00

3 NS-3 Providing & Fixing of emergency sign boards size of

required size made out of 3 mm thk acrylic sheet/ Sun

boars/ ACP sheet Green/ Red Colour Glow Night Tape

pasted on sheet with single side writing with fixing on

wall,fixed with four rawls plugs stainless steel srew/

double side tape of 3M make required nos of holes,

wherever required complete as per direction of Unit

Incharge. Sq Inch 3000 8.50 25500.00

4 NS-4 Providing & Fixing LED sign board of size 57' x 3.25'' fixed

on perforated sheet .LED letter made of 3D box type

letter, the front portion of letters Will be hollow and the

same will be covered with 2 mm thick. Acrylic plastic

sheet with permanent fixing with adhesive/ silicon

System. The side projection of letters will be 1.50 inches

with 10 Mm collars at front to hold the acrylic letter.

Colours of LED Letter shall be white shall be white. The

letters heights will Height of Hindi letters 24" & Height of

English letters 20", The Led letters shall be fixed on ACP

sheet. LED modules of (Make SAMSUNG) Required fixed

inside acrylic letters as including transformers, cabeling

with electric connection & Timer. The LED letters shall be

fixed on 40 feet APPROOXIMATE hieght with scaf folding

with nut bolt, all complete as per Direction. Matter of LED

sign board shall be as under :-

(a) राष्ट्रीय आपदा प्रबंधन संस्थान Job 1 91800.00 91800.00

(b) NATIONAL INSTITUTE OF DISASTER MANAGEMENT

5 NS-5 Providing & Fixing LED sign board of size 10' x 2'' fixed on

3 mm thick existing Aluminum Composite Panel (ACP)

.LED letter made of 3D box type letter, the front portion of

letters Will be hollow and the same will be covered with 2

mm thick. Acrylic plastic sheet with permanent fixing

with adhesive/ silicon System. The side projection of

letters will be 1.50 inches with 10 Mm collars at front to

hold the acrylic letter. Colours of LED Letter shall be

white. The letters heights will Height of Hindi & English

letters 10", The Led letters shall be fixed on ACP sheet.

LED modules of (Make SAMSUNG) Required fixed inside

acrylic letters as including transformers, cabeling with

electric connection & Timer. The LED letters shall be fixed

on 40 feet APPROOXIMATE hieght with scaf folding with

nut bolt, all complete as per Direction. Matter of LED sign

board shall be as under :-

(a) द्रोणाचायय हाल, DRONACHARYA HALL Job 1 42500.00 42500.00

(b) चाणक्य हाल, CHANAKYA HALL Job 1 34000.00 34000.00

NBCC 24 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

6 NS-6 Providing & Fixing LED sign board of size 12' x 5' made of

frame 40 mm MS square pipe and fixed on 3 MM

Aluminum Composite Panel (ACP) .LED letter made of 3D

box type letter, the front portion of letters Will be hollow

and the same will be covered with 2 mm thick. Acrylic

plastic sheet with permanent fixing with adhesive/ silicon

System. The side projection of letters will be 2 inches with

12 Mm collars at front to hold the acrylic letter. Colours of

LED Letter shall be white. The Hindi letters heights be 28"

Inches & English letters height 36", The LED letters fixed

on ACP sheet. LED modules of (Make SAMSUNG) Required

fixed inside acrylic letters as including transformers,

Timer & cabeling with electric connection. Fixed With MS

Pipe of 50 mm x 50 mm x 16 gauge, Frame supported with

angle iron grouted on roof fixed on 80 feet

APPROOXIMATE height with scaf folding with nut bolt, all

complete as per Direction.

7 NS-7 Providing & Fixing Stainless Steel 304 Series stand for

hanging name plates & 2 hooks on top (As per sample)

8 NS-8 Providing & Fixing of retro reflective sign board of size

1800 mm x 1200 mm. The board made of High intensity

prismatic grade type IV retro reflective sheeting of 3M

/Avery Denison or equivalent make approved by I.R.C. /

M.O.S.T. with message and graphics to be film of same

make, letters written (Both sides) in white colour, to be

pasted on 3mm thick 2 Nos ACP sheets. Frame made of

stainless steel 304 series, 38mm dia pipe & 2nos. 63mm

diavertical posts, 3 Mtr. high, all made of 304 series

stainless steel. Pipe fixed on ground including necessary

excavation and sign board fixed with in ground in 450

mm depth with all excavation & cement aggregate

concrete as per direction of Unit Incharge.

9 NS-9 Providing & Fixing of retro reflective sign board of size

1200 mm x 900 mm. The board made of High intensity

prismatic grade type IV retro reflective sheeting of 3M

/Avery Denison or equivalent make approved by I.R.C. /

M.O.S.T. with message and graphics to be film of same

make, letters written (Single side) in white colour, to be

pasted on 3mm thick 1 No ACP sheets. Frame made of

stainless steel 304 series, 38mm dia pipe & 2nos. 63mm

diavertical posts, 3 Mtr. high, all made of 304 series

stainless steel. Pipe fixed on ground including necessary

excavation and sign board fixed with in ground in 450

mm depth with all excavation & cement aggregate

concrete as per direction of Unit Incharge.

10 NS-10 Providing & Fixing of retro reflective sign board of size

900 mm x 600 mm. The board made of High intensity

prismatic grade type IV retro reflective sheeting as per

I.R.C. / M.O.S.T. with message and graphics to be overlay

film of same make duly plotter cut, letters written (single

side) in white colour, to be pasted on 3mm thick ACP

sheet. The backside of frame shall be covered with 3mm

ACP sheet. Frame made of 40mm dia pipe & 1no 63mm

diavertical posts, 2.1 Mtr. high, all made of 304 series

stainless steel 304 series.The pipe shall be standing on

hard concrete surface with the help of SS holdfast/ Hilti or

equallent flush anchor (Fastners) of as per reuired size

and numbers and thickness and nut bolts on 02 Nos.5 mm

thick 200mm x 200 mm size SS plate welded with 63mm

dia SS pipe as per direction of Unit Incharge.

NBCC 25 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

11 NS-11 Providing & Fixing of retro reflective sign plates of

required size. The plate made of High intensity prismatic

grade type IV retro reflective sheeting as per I.R.C. /

M.O.S.T. with message and graphics to be overlay

film/High intensity prismatic grade type IV retro

reflective sheeting Reflective tape of same make duly

plotter cut, of approved color, letters (single side) in

white colour, to be pasted on 3mm thick ACP sheet . as

per drawings. The sign boards shall fixeed on wall/ roof

duly fixed with rawls plugs of required size of required

nos of holes, wherever required complete as per direction

of Unit Incharge. Sqft 150 531.25 79687.50

12 NS-12 Supplying and fixing of 18 gauge Stainless Steel Key Rings

of Size 2" x 1.5" of 304 Series in Roman in black colour

etc. all complete as per sample approved and all as per

13 NS-13 Providing & Fixing Key ring holder stand of size 600 mm x

450 mm fixed with required numbers of rawls plugs

stainless steel srew as per direction of Unit Incharge.

14 NS-14 Providing & Fixing of Stainless Steel Lobby board/

Wlcome board of size 3' x 2’ PVC sheet on back side.

Frame of brass.Front side covered with acrylic, Golden

letters and figures of 18mm & 24mm sizes are provided

for display of programmes, messages as per direction of

Engineer in charge. No 4 12325.00 49300.00

15 NS-15 Providing and applying 2.5 mm thick road marking strips

(retroreflective) of specified shade/ colour using hot

thermoplastic material by fully/ semi automatic

thermoplastic paint applicator machine fitted with profile

shoe, glass beads dispenser, propane tank heater and

profile shoe heater, driven by experienced operator on

road surface including cost of material, labour, T&P,

cleaning the road surface of all dirt, seals, oil, grease and

foreign material etc. complete as per direction of Unit

Incharge and accordance with applicable specifications.

16 NS-16 Supply and installation of Raised pavement marker(RPM)

with polycarbonate lens electronically welded with the

RPM body. Marker shall be scratch proof and abrasion

resistant microprismatic polycarbonate lens with

polycarbonate Reflective panels with dual prismatic

cubes capable of providing total internal reflection.

Dimensions: Dimensions of the marker is Height: 15.88

,Width: 101.6 ,Length: 89.2 .The marker conforms to

ASTM D4280 and is in accordance with MOSRTH Circular

Ref No. RW/NH 33023/10/97-DO III Dated 11th june

1997. Markers shall be fixed with adhesives and no nails

shall be used to affix the marker, complete all as specified.

17 NS-17 S&F solar powered road studs (cat eye) of size 125

mmx125 mmx 20-25 mm thick (shank-60 mm) of self

illuminating flashing type having 3 equalent LED's for Bi-

directional studs (flashing and not flickering) visibility

minimum 1000m flashing rate, 65-75 times per minute

with detachable Ni-MH rechargable battery (1.2 V/ 1600

MA) made of aluminium die cast housing with embossed

edges for protection against iron wheels fixed to surface

etc complete all as specified and directed by Unit Incharge.

NBCC 26 Signature of Contractor

SH/S.NO. DSR DESCRIPTION UNIT QTY RATE AMOUNT NS AMOUNT DSR

2021/NS DSR/NS

18 NS-18 Supply & placing of Stainless Steel 304 series Dustbin

with foot operated of size 7" x 11" as per direction of Unit

19 NS-19 Supply & placing of Stainless Steel 304 series Dustbin of

size 24” x 10” with swing opreated cover as per direction

of Unit Incharge. Nos 12 2550.00 30600.00

20 NS-20 Supply & placing Road side bin moon (90 LTR) with SS

stand & frame as per direction of Unit Incharge. Nos 12 9350.00 112200.00

21 NS-21 Supplying of Q Manager made of hollow stainless steel

pipe of 18 gauge and 900 mm high including 1.30 mtr

and 50mm width long ribbon etc. all complete as per

direction of Unit Incharge. Nos. 20 3230.00 64600.00

Note: The rate of above items in this subhead is inclusive

of scaffolding and work at any heights complete in all

GRAND TOTAL (A TO K) 42070170.70 5654704.66

GRAND TOTAL (A TO K) 42070170.70 5654704.66

NBCC 27 Signature of Contractor