PROVN OF STORE FOR FURNITURE AT MES COMPLEX AND PROVN OF GRILL PROTECTION OF WINDOW IN GROUND FLOOR OF BLDGS AT MIL STN MOUNT ABU UNDER AGE I UDAIPUR

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.

Filling in any position in foundation/under floor with approved earth (soil) brought outside from MD land from contractors own source with any lead including spreading, levelling, watering and well ramming in layers not exc. 25 cm each layer complete all as specified and as directed.

Removing excavated material (soil) exc 250m but n exc 500m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 design mix(20mm graded aggregate) as in foundation, including raft, footings, foundation beams, plinth beams/ plinth band, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 design mix(20mm graded aggregate) (20mm graded aggregate) as in beams, cantilever, lintels over 1.5m span etc complete all as specified and as directed.

M&L RCC M-25 design mix(20mm graded aggregate) (20mm graded aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat all as specified.

M&Lformwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces of concrete flat complete all as specified and as directed.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, square, rectangular or polygonal complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M/L for brick work with kiln burnt bricks built in CM (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

M & L 15mm thick cement plaster (External) on fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L 10mm thick cement plaster (internal) on other than fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 50 mm thick 1:2:4 of type B-1 using 20 mm graded stone aggregate as in floors finished concere even and smooth without using extra cement complete all as specified and as directed.

M & L for Glass dividing strips 4 mm thick and width of strip 48 mm in PCC flooring etc. complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1, (using 20mm graded stone aggregate) as in plinth protection/ path laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified and as directed.

Material and labour for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F 3mm thick sheet glass ground or Obscured or frosted on one side sheet glass and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specified and as directed.

M&L two coats of oil bound distemper (acrylic) white or tinted including preparation of new plastered surfaces of walls etc. complete all as specified and directed.

M & L for Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Material and labour for preparation of newly/old plastered surface of wall and applying two coats of cement base paint complete all as specified.

S & F prepainted 0.50 mm thick galvalume aluminium zinc AZ-150 coating GI based corrugated steel coloured Sheet in tile profile pattern having tensile strength of 550 Mpa as in roof covering and similar work fixed with self tapping at aliternate corrugation screws fixed complete all as specified and directed.

S & F prepainted 0.50 mm thick galvalume aluminium zinc coating GI based plain steel coloured Sheet having tensile strength of 550 Mpa as in roof for ridges etc. serrated ridge fixed with self tapping screws as specified and directed.

M&L Plain,galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E165) fixed complete all as specified and directed.

S & F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A Fe complete all as specified and directed.

S & F for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-A Fe fixed complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc 5cm but n.exc 10 cm long, dia of neck 50 10 mm fixed complete all as specified and directed.

M & L for PCC type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S & F Mild steel, plain, black sheet, 1.6 mm thick, in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required fixed complete all as specified and directd.

M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete.

M & L for machine pressed precast conctete interlocking paver plain or coloured block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-25 Grade with grey cement and no pigment laid over sand cushion complete all as specified and directed. (Note : sand cushion will be measured seperately)

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Cutting holes in brick/stone walls built in cement mortar or cement lime mortar or stone walls built in mud mortar depth of embedded portion of holdfasts or lugs measured from the face of the jamb n.exc half brick into the wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated copper earth continuity conductor of size 1.5 sq mm suitable for One light point controlled by one way 5 Amps switch complete all as specified and directed by Engr-in-Charge :-

All as per item no. 43.00 here-in-above, but suitable for one socket out let 5 Amps 5 pin on independent board

All as per item no. 43.00 here-in-above, but suitable for one socket out let 5 Amps 5 Pin on same board with other switch

All as per item no. 43.00 here-in-above, but suitable for cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 1.0 Sq mm all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5 Amps single pole one way.

S&F socket out let 2 in 1 multi pin 5 Amps flush type universal.

S&F switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

S&F Ceilling rose on PVC board size 65 X 50 mm three terminal Complete.

S&F Angle holder backelite complete all as specified.

S & F MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified.

S&F MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified and directed by Engr-in-Charge.

S&F MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified.

S&F LED lights fitting 1x18 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.

M & L for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered FRLS) 1x2.5 sqmm copper conductor wire as earth continuity in PVC counduit complete all as specified and directed by Engr-in-Charge.

Supply and Laying XLPE insulated, armoured heavy duty aluminium conductor of 1100 volts,cross sectio are 10 sqmm 2 core complete all as specified and directed by Engr-in-Charge.

Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schdule part-I and testing after completion all as specified and directed by Engr-in-Charge

M/S Balkishan Panwar Construction

Choudhary Traders and Engineers