REPAIR BY MAINT OF DRAIN FENCING AND FOOTHPATH ETC IN ZONE A B AND C AREA OF AGE BR I UNDER GE WEST LUCKNOW

Amount

M&L Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1as required; superficial area exceeding 150 Sqcm but not exceeding 400 Sqcm complete

M&L Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork, masonary etc and making good disturbed ground complete all as specified and directed.

M&L Dismantling fencing wire mesh any type complete all as specified and directed.

M&L MS work post & struts in fencing including cutting tops to shape as dircted,drilling holes, notching for wire etc flat iron fillerts (for securing wiremesh etc) including all necessay drilling bolting or riveting etc and similar work including nut bolts confirming to Fe-290 Gde E-165 complete all as specified.

Excavation in post holes in soft/loose soil n.exc 0.5cum and getting out returning filling in and ramming earth or broken rubbles mixed with earth around in layers n.exc 25cm complete all as specified and directed.

Excavation in trenches n-exc 1.5 Mtr wide and not -exc 1.5 mtr deep in soft and loose soil complete all as specified and directed.

Removing excavated materials n-exc 50 mtr and deposited where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed

Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to faciliate demolition) not otherwise specifically provided for complete all as specified and directed.

S&F hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and coutersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts posts and strut in fencing including cutting tops to shape as directed, drilling holes notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in percast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average, sectional area exc 100 and n exc 250 sq.cm, with or without chamfered angles and flat, splayed, round or mitred tops as directed and fixed complete all as specified and directed.

S&F mild steel screw bolts (machine made ) with hexa gonal or square heads at one end 5 to 10mm dia of neck and n exc 5 cm long bolt with washer and nuts complete all as specified and directed.

S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Restraining/resecuring including making good staples, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply only 3mm dia GI wire chain link fencing and line wire 75x75mm mesh size and any type of strand rails straining bolts etc including provision of binding wire complete all as specified and directed.(Weight of fencing shall be decided by BOO)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails,straining bolts, etc.including provission of binding wire complete all as specified and directed.

M&L for filleting in any position and in any shape in cement mortar 1:4 including all mitres , stops etc. exc. 50 but n. exc. 100 sqcm in section complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed and specified.

M&L Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L Mild steel round bars 10mm dia as in handles , hooks etc cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

ditto but except bricks with old size bricks as bricks obtained from demolition with straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using (20 mm graded stone aggregate) as in benching and coping etc with necessary form work complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L PCC 1:3:6 Type C-2 using 40 mm graded stone aggt as in foundation, filling and mass concrete complete all as specified and directed.

M&L in repairs Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete.(Reinforcement to be included in quoted rates).

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete.

M&L for Precast cement concrete 1: 2:4 type B1 (using 20mm graded stone aggregates) as in drain/MH cover slab etc set in cement mortar 1:4 complete all as specified and directed.

M&L 40mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in floors finishing the surface even and smooth with using extra cement complete all as specified and directed.

M&L Glass dividing strips, 3mm thick and 38mm wide, inserted in position in floors complete.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with Grey cement and no pigment including 25mm thick sand cushioning complete all as specified and directed.

M&L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with Grey cement and no pigment including 25mm thick sand cushioning complete all as specified and directed.

M&L Duracrete cement concrete tiles 300 x300 x 20mm thick in path set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed.

M&L chequred cement concrete tiles 250 x250 x 20mm thick in path set, jointed and pointed in neat cement slurry with grey cement and pigments over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed.

M&L providing reinforced cement concrete type B-1 (1:2:4) (20mm graded aggregate) as in fdn filling complete all as specified and directed.

M&L providing cement concrete type B-1 (1:2:4) (20mm graded aggregate) as in surface channel and drain complete all as specified and directed.

M&L 75mm thick cement concrete Type D-2 (1:4:8) using 40 mm graded stone agg) as in subbase for floors complete all as specified and directed.

M&L reinforced cement concrete type B-1 (1:2:4) (20mm graded aggregate) as in columns, pillars, piers, posts and strut complete all as specified and directed.

Preparing new plastered or unplastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint, any tint over and including a coat of wall care putty complete.

Preparing old plastered or unplastered surfaces any description over 10 Cm girth or width and applying one coats of weather proof exterior acrylic emulsion paint, any tint complete.

M&L 10mm thick rendering on fair faces of brickwork or concrete surface with 1:4 cement mortar finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L 10mm thick rendering on other than fair faces of brickwork or concrete surface with 1:4 cement mortar finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L 10mm thick rendering on other than fair faces of brickwork or concrete surface with 1:4 cement mortar finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete.

M&L Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete

M&L Form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete.

M&L Granite (of any type) tiles 20 mm thick machine cut, (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with as in steps, jambs, pillars, window cills, cooking plateform etc 1:2 and laid over screed 15mm in CM 1:4 complete (screed to be measured separately).

M&L for preparing newly plastered surface of wall & applying three coats of white wash complete all as specified and directed.

M&L for preparing old steel surface of any description exc 10cm width or girth & applying two coats of synthetic enemal paint complete all as specified and directed.

S&F in repairs precast cement concrete 1:2:4 mix , type B1 (using 20mm graded stone aggt) as in curb stone of size and shape as approved , set and jointed in CM 1:4 including demolition and dismantling of existing with excavation and earth work and removal of surplus soil to a distance n. exc. 50m complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe 290 Gde E-165 complete all as specified and directed.

M&L preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

shiva enterprises

M/S A P ENTERPRISES

R K CONTRACTOR AND SUPPLIERS