Providing and installation ...

Supply, erection testing and commissioning of of DG set 125 kVA Liquid Cooled Standard Diesel Generating Set Comprising of Kirloskar make Liquid Cooled (CPCB IV plus Latest Norms compliance) developing 156 BHP @ 1500 RPM Directly coupled with 125 kVA Alternator rated at 3 Phase 415 Volts, 50 Hz and 0.8 p.f. both mounted and Aligned on Common Base Frame complete with inbuilt MS Fuel Tank, Residential Exhaust Silencer, AVM pads fitted on Base Frame 1 No Battery of suitable capacity for 12 Volts Operating System, and Integrated Manual Panel with feature of Auto Start and Auto Stop subject to all housed in Acoustic Enclosure, class of insulation-H,Engine Protection: Low lube oil pressure, High/Lowcoolant temperature, Battery High/Low/Weak Volts, Fail to Crank/Start, Sensor failure, Cranking lockout, Low fuel level, AMF Functionality, Electronic Governing, Sync Compatible (Capable to accept external speed signal from 3rd party sync controller), Remote start-stop, Audible and Visual warning for Inducement, Suitable for FAE based engine architecture, Eingine Metering: Oil pressure, Engine temperature, Starting battery voltage, Engine running hours AC Alternator Metering: -L Voltage and L-N Voltage, Current (phase and total), kVA (phase and total) and Frequency, kwh, Total and per phase (kw and kVA), PF, Utility, Voltage and Freq Alternator-Stamford, Waveform distortion-No load ( 1.5%, Non distorting balanced linear load(5%,AC Alternator Protection: Over/Under Voltage, Over/Under Frequency, Loss of AC sensing Overspeed, Over Current,kW Overload Brushless type, Screen protected, Revolving field, Self-excited alternator conforming to IS/IEC 60034-1. Better motor starting capability, Best in class efficiency Compact design with sealed bearings for longer life and lesser maintenance, Impregnation on all wound components for better mechanical strength complete with electronic governer, with battery with AmF panel complete as per latest manufacturer specification and compatible with DG Syncronization system. Make:-Cummins, Kirolskar

BAR SCREEN : Supplying, fabricating and fixing made of MS, with flats 25x 3mm spaced at 10mm c/c with MS rake type Size: 1000mm x 1000mm, placed at 45 degree to the vertical in the bar screen as per the approved the make ORION/ECOGENE/PYNEER. The flat cutting, welding, bending wherever necessary finished with matt finishing etc., complete. cost of material and conveyance of all materials, labor for all item of work, equipment and all other incidental charges as per the specification and directions of the Engineer-in –charge of the works. MS FRP Bar Screen Technical Specification: Bar Screen Chamber Dimension: Length : 1000 mm Width : 1000mm Mild steel sheet Thickness : 3mm Screen Size : 10mm Screen MOC : Mild Steel Make : ORION/ECOGENE/PYNEER Screen coating : Epoxy / Enamel

RAW SEWAGE TRANSFER PUMP Supplying, installing, testing and commissioning of RSTP (working plus standby) Monoblock type raw sewage water pumps to pump sewage from equalization tank to RBC tank at 5.41 cu.m / hr flow rate. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame made out of `MS` with necessary bolts, nuts. The pump shall be suitable for raw sewage capacity. Technical Specification Type : Centrifugal mono block Motor HP : Suitable HP Flow Rate : 5.41 m3/hr Head : 15 Mts Moc : CI a) Valve Suction : 2 nos Delivery : 2 nos Moc : CI Type : Ball /Butterfly b) Non Return Valve Delivery : 2 nos Moc : CI Pump (1 w plus 1S) 2nos of pump = 1 set Make :Kirlosker or Equivalent

CHLORINE DOSING SYSTEM Supplying, Installing, Testing and Commissioning of dosing system MS Paddle with base frames, 50 Liters HDPE, Capacity: - 0-10LHP @ 10 rpm, with MS enamel support frame. Including cost of material and conveyance of all materials, labour for all item of work, and all other incidental charges etc., complete as per the specification and directions of the Engineer-in -charge of the works. Technical Specification pump type : Electronic Diaphragm Capacity : 0-10LPH Nominal Back pressure : 5 Kg/cm2 Maximum Back pressure : 3.5 kg/cm2 KW : 0.024watt Tank Capacity : 50 Liters MOC : PP Make : E DOSE/Eqv

FILTER FEED PUMP Supplying, Installing, Testing and Commissioning of Filter Feed pumps Supplying, installing, testing and commissioning . Monobloc type pumps (working and standby) for pumping primary treated water through sand pressure filter, activated carbon filter, doser etc and finally to treated water tank The pump shall be coupled to the adequate H.P. electrical motor and shall be mounted on a common base frame made out of `MS` with necessary bolts, nuts The pump shall be suitable for the following requirements: Technical Specification Flow Rate : 16.25 m3/hr Motor HP : Suitable Hp Head :25- 30 Mts Moc : CI a) Valve Suction : 2 nos Delivery : 2 nos Moc : CI Type : Ball /Butterfly b) Non Return Valve Delivery : 2 nos Moc : CI Make : Kirloskar or equivalent Pump (1 w plus 1S) 2nos of pump = 1 set

SAND FILTER Supplying, Installing, Testing and Commissioning of Pressure Sand Filter MS fabricated as per the approved the make ORION/ECOGENE/PYNEER shell thickness: 5mm dish thickness: 5 mm and painted internally with two coats of enamel black and externally with one coat of red oxide primer and above that a layer of two coats of enamel paint. Filtering media: Graded Gravel/Sand. Working pressure: 3.5 kg/cm2 and Testing pressure: 5 kg/cm2 , Minimum depth of media: 915mm Minimum depth of sand: 915mm. The filter is fitted with top inlet distribution and bottom collection system. Pressure gauge is provided at inlet. Complete set of valves, pressure gauge, frontal piping at inlet, outlet backwash and drain outpoint etc., with MS class ‘B’ pipes (make: Jindal or equivalent) Dia : 1000mm, HOS – 1900 mm, TH– 2200mm including cost of material and conveyance of all materials, labour for all item of work, equipments and all other incidental charges ect., Technical Specification Sand filter dia : 1000mm Shell thickness : 5mm Dish end Thickness : 5mm Frontal Pipeline : 50NB MOC : Mild Steel External Coating : Red Oxide and Enamel paint Internal Coating : Enamel Filter Media : Fine Sand, Gravel sand, pebbles Make : ORION/ECOGENE/PYNEER Media in Kg : 1200 Media Depth : 915 mm Type : Cylindrical, Vertical

ACTIVATED CARBON FILTER Supplying, Installing, Testing and Commissioning of Activated Carbon Filter MS fabricated as per the approved the make ORION/ECOGENE/PYNEER and shell thickness: 5mm dish thickness: 5mm and painted internally with two coats of enamel black and externally with one coat of red oxide primer and above that a layer of two coats of enamel paint. Filtering media: Graded Gravel/carbon. Working pressure: 3.5 kg/cm2 and Testing pressure: 5 kg/cm2 The filter is fitted with top inlet distribution and bottom collection system. Pressure gauge is provided at inlet. Complete set of valves, pressure gauge, frontal piping at inlet, outlet backwash and drain out point etc., with MS class ‘B’ pipes Dia: 1000mm, HOS – 1900mm, TH – 2200mm including cost of material and conveyance of all materials, labor for all item of work, of equipment and all other incidental charges etc., Technical Specification Filter Dia : 1000 mm Shell Thickness : 5mm Dish end Thickness : 5mm Frontal Pipeline : 50NB MOC : Mild Steel External Coating : Red Oxide and Enamel paint Internal Coating : Enamal Filter Media : Activated Carbon Make : ORION/ECOGENE/PYNEER Media Depth : 1000 mm Media in Kgs : 430 kg Type : Cylindrical, Vertical

INTERCONNECTING PIPE WORK Providing and fixing in position the Necessaries size butterfly valve and ball valves of approved make including cost of all martials, Labor and Equipment’s and all other incidental charges etc., Providing and fixing in position the suitable NRV valve of approved make including cost of all martials, Labor and Equipment’s and all other incidental charges etc., Providing and fixing in position MS pipe and fittings , UPVC pipe and fittings of approved make including cost of all materials, Labor and Equipment’s and all other incidental charges etc.,(Make: Supreme, Finolex OR Eqv) Supplying and Providing of 25mm dia Air vent MS pipes of approved make including cost of all materials, labor charges, of and all other incidental charges etc.,.

MOTOR CONTROL CIRCUIT BOARD Installation, testing and commissioning of MCCB (Motor Control Circuit Board).Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminum bus bars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch, change over switches, indicating lamps, etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code Adequate size cable alley shall be provided all round the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid bus bars. Flexible cable links are not acceptable. Bus bars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from bottom.

Operation and consumables including maintenance of STP for 1st year (3 operator and 1 relilver), complete