REPAIR POLISHING TO WOODEN FURNITURE AND RECANNING OF CHAIRS AT AF STN NAL

Amount

Removing old unserviceable Top of Table Dining 6 persons and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-273

Removing old unserviceable Leg of Table Dining 6 persons and S&F new Leg without PVC ring (PVC rings will measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No. FD-273

All as per item No 2 but for Top rail long . Refer drg No. FD-273

All as per item No 2 but for Top rail small . Refer drg No. FD-273

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface to table dinning 6 persons complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-273

Removing old unserviceable Top of Table Dining 8 persons and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-273

Removing old unserviceable Leg of Table Dining 8 persons and S&F new Leg without PVC ring (PVC rings will measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No. FD-273

All as per item No 7 but for Top rail long . Refer drg No. FD-273

All as per item No 7 but for Top rail small . Refer drg No. FD-273

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface to table dinning 8 persons complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-273

Removing old unserviceable Top of Table 900x600 with/without drawer and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No.FD-283, 284

Removing old unserviceable Leg of Table 900x600 with/without drawer and S&F new Leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No.FD-283, 284

All as per item No 12 but for Top rail long. Refer drg No.FD-283, 284

All as per item No 12 but for Top rail small. FD-283, 284

Removing old unserviceable PVC rings of Table 900x600 with/without drawer and S&F new PVC rings fixed with screw. of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No FD-283, 284

All as per item No 15 but for Drawer.Refer drg No FD-283, 284

All as per item No 15 but for Stiffner.Refer drg No FD-283, 284

M&L for polishing 2 coat to new part and scraping complete for old surface and applying 01 coat french polish to entire surface to Table 900x600 with/without drawer complete all as specified and directed by Engineer-in-Charge. Refer drg No FD-283, 284

Removing old unserviceable top of Table 900x900 and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No FD-291

Removing old unserviceable Leg of Table 900x900 and S&F new Leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No FD-291

All as per item No 20 but for Top rail.Refer drg No FD-291

Removing old unserviceable PVC rings of Table 900x900 and S&F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No FD-291

Removing old unserviceable Flat iron of Table 900x900 and S&F new 150x25x5.0mm th Flat iron 'L'"shape brackets treated with OG paint of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-291

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface to Table 900x900 complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD- 291

Removing old unserviceable top of Peg Table and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-277

Removing old unserviceable Leg of Peg Table and S&F new leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No. FD-277

All as per item No 25 but for top rail long . Refer drg No. FD-277

All as per item No 25 but for top rail small. Refer drg No. FD-277

Removing old unserviceable PVC rings of Peg Table and S&F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-277

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface of Peg table complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-277

Removing old unserviceable top of Table Writing and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-275

All as per item No 31 but for Leg. Refer drg No. FD-275

All as per item No 31 but for Top rail long. Refer drg No. FD-275

All as per item No 31 but for Top rail small. Refer drg No. FD-275

All as per item No 31 but for Drawer. Refer drg No. FD-275

All as per item No 31 but for Stiffner Long. Refer drg No. FD-275

All as per item No 31 but for Stiffner small. Refer drg No. FD-275

All as per item No 31 but for Door panel. Refer drg No. FD-275

Removing old unserviceable PVC rings of Table Writing and S&F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-275

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface to table writing complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-275

Removing old unserviceable Drawer of Table Dressing Ladies and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-251

Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror complete with frame and back rails complete made of teak wood duly fixed with clamp for hanging of table dressing ladies complete all as specified and shown on drg and directed by Engineer-in-Charge. Make of mirrror: Modi/swastik/Atul of existing size, shape. Refer drg No. FD-251

Removing old unserviceable Sliding glass of Table Dressing Ladies and S&F new Sliding glass 5 mm thick with aluminium E channel of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-251

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface Table Dressing Ladies complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-251

Removing old unserviceable Drawer of Table Dressing Gents and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-230

Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-230

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface table dresing gents complete all as specified and directed by Enginer-in-Charge.Refer drg No. FD-230

Removing old unserviceable Top of Table Centre/Table centre 2 tier and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-235,274

Removing old unserviceable Leg of Table centre/Table centre 2 tier and S&F new Leg without PVC ring (PVC rings will be measured separately) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge Refer drg No. FD-235,274. .

All as per item No 48 but for Top rail long.

All as per item No 48 but for Top rail small. Refer drg No. FD-235,274

Removing old unserviceablePVC rings of Table Centre and S&F new PVC rings fixed with screw of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-235,274

M&L for polishing 2 coat to new part and scraping complete for old surface and each applying 01 coat french polish to entire surface to table centre complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-235,274

Removing old unserviceable Top of Table Bed Side MAP and S&F new Top made of 19mm thick prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD/E6/MAP/15(R) Note :All Sides of table bed side MAP Top and bottom suport to be 25mm square pipe should be welding as on above.

All as per item No 54 but for CP handle Refer drg No. FD/E6/MAP/15®

All as per item No 54 but for telescopic channel Refer drg No. FD/E6/MAP/15®

All as per item No 54 but for big drawers. Refer drg No. FD/E6/MAP/15®

All as per item No 54 but for leg. Refer drg No. FD/E6/MAP/15®

Removing old unserviceable Plywood of Bed Hard and S&F new Plywood 12 mm thick of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No. FD-246, 247

Removing old unserviceable Head board of Bed Hard and S&F new Head board complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge Refer drg No. FD-246, 247.

Removing old unserviceable Foot board of Bed Hard and S&F new Foot board complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-246, 247

Removing old unserviceable Long rail of Bed Hard and S&F new Long rail made of teak wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-246, 247

Removing old unserviceable Support rail of Bed Hard and S&F new Support rail made of 2nd class hard wood of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.Refer drg No. FD-246, 247

Removing old unserviceable MS bracket of Bed Hard and S&F new MS bracket 150x35x5mm thick Flat iron "L"shape duly treated with black japan paint. of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-246, 247

M&L for polishing 2 coat to new part and 01 coat to entire surface to bed hard complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-246, 247

Removing old unservinceable bottom frame from side board and supply and fixing new bottom frame made of Ist class hard wood in legs complete all as shown on drg and as directed by Engr-in-Charge. Refer drg No. FD-241

Removing old unserviceable door panels from side board and supply and fixing door panels (Left and right both) made of 18mm thick prelaminated particle board including lock and knobs complete all as shown in drawing fixed with piano type hinges. All as shown on drawing and as directed.Refer drg No. FD-241

Removing old unserviceable shelf from side board and supply and fixing new shelf made of 18mm thick commercial plywood complete all as shown in drawing fixed with piano type hinges. All as shown on drawing and as directed by Engr-in-Charge.Refer drg No. FD-241

Removing old unserviceable knobs from side board and supply and new metallic knobs as per existing pattern fixed with machine screw complete. All as shown on drg and as directed by Engr-in-Charge. Refer drg No. FD-241

M&L for polishing 2 coat to new part and 01 coat to entire surface to Side Board complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-241

Removing old unserviceable Top of Teapoy and S&F new Top made of prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. Refer drg No. FD-278

M&L for polishing 2 coat to new part and 01 coat to entire surface of teapoy complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-278

M&L for repairing chair dining/Chir wooden bottom by replacing Front leg made of shisham wood and properly tightening of seat frame complete all as specified and directed by Engineer-in-Charge. (PVC rings will be measured separately). Refer drg No. FD-279

All as per item No 73 but for Rear leg. (PVC rings will be measured separately).Refer drg No. FD-279

All as per item No 73 but for Side rail with caning holes for seat frame. Refer drg No. FD-279

All as per item No 73 but for Front rail with caning holes for seat frame. Refer drg No. FD-279

All as per item No 73 but for rear rail with caning holes for seat frame. Refer drg No. FD-279

All as per item No 73 but for Stiffner. Refer drg No. FD-279

M&L repairing chair dining/Chair wooden bottom by replacing PVC Shoes (best quality) white with screw and washer complete all as specified and directed by Engineer-in-Charge . Refer drg No. FD-279

M&L for polishing 2 coat to new part and 01 coat to entire surface complete to chair dining/Chair wooden bottom complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-279

Repairing of chair writing by replacing Front leg made of shisham wood and properly tightening of seat frame duly polished with French Polish complete all as specified and directed by Engineer-in-Charge. (PVC rings will be measured separately).Refer drg No. FD-280

All as per item No 81 but for Rear leg. Refer drg No. FD-280

All as per item No 81 but for Side rail with caning holes for seat frame.Refer drg No. FD-280

All as per item No 81 but for Front rail with caning holes for seat frame. Refer drg No. FD-280

All as per item No 81 but for rear rail with caning holes for seat frame. Refer drg No. FD-280

All as per item No 81 but for Stiffner. Refer drg No. FD-280

All as per item No 81 but for Arms.Refer drg No. FD-280

Repairing of chair writing by replacing PVC Shoes (best quality) white with screw and washer complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-280

M&L for polishing two coat to new part and one coat to entire surface to chair writing complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-280

Repairing of chair easy by replacing Leg rear/front made of shisham wood and properly tightening of seat frame duly polished with French polish Complete all as Specified and directed by Engr-in-Charge. (PVC rings will be measured separately). Refer drg No. FD-229

All as per item No 90 but for Side rail of Seat frame/back frame with holes for canning .Refer drg No. FD-229

All as per item No 90 but for Front rail of Seat frame/back frame with holes for canning. Refer drg No. FD-229

All as per item No 90 but for Rear rail of Seat frame/back frame with holes for canning. Refer drg No. FD-229

All as per item No 90 but for Arms.

Repairing of chair easy by replacing PVC Shoes (best quality) whitewith screw and washer complete all as specified and directed by Engineer-in-Charge. Refer drg No. FD-229

M&L for polishing 2 coat to new part and 01 coat to entire surface to chair easy complete all as specified and directed by Engineer-in-Charge.Refer drg No. FD-229

Removing Old unserviceable Cane From Chair dinning and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work Complete all as Specified and directed by Engr-in-Charge .Refer drg No. FD-229

All as per item 97 above but chair writing.Refer drg No. FD-280

All as per item 97 above but Chair easy (Seat &Back) complete Refer drg No. FD-229.

Removing old unserviceable top from Table computer and supply fixing new top made of prelaminated particle board all as shown on drg FD/E6/MAP/03 & TP and as directed by Engineer-in-Charge.

Removing old unserviceable shelf from Table computer and supply fixing new shelf made of prelaminated particle board all as shown on drg FD/E6/MAP/03 & TP and as directed by Engineer-in-Charge.

Removing old unserviceable key board tray from Table computer and supply fixing new key board tray made of prelaminated particle board with telescopic channel SS (Make : Flyrail/Hettich/Haffle) all as shown on drg FD/E6/MAP/03 & TP and as directed by Engineer-in-Charge.

Removing old unserviceable Drawer from Table computer and supply fixing new drawer made of prelaminated particle board with telescopic channel SS (Make : Flyrail/Hettich/Haffle) all as shown on drg FD/E6/MAP/03 & TP and as directed by Engineer-in-Charge.

SMS Enterprises

PRAFUL ENTERPRISES