SPECIAL REPAIRS TO MH-02/04 (B COY OR TOILETS), P-134 AND P-138 AT GNC LINE AND ADDITIONAL / ALTERATION TO BLDG NO P-142 OF ASC CENTRE (SOUTH)-2 ATC UNDER GE (CENTRAL) BANGALORE

Amount

M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as directed.

M&L for excavation in Soft/loose soil in trenches,nexc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts,wells,cesspits,manholes,pier holes etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as directed.

M&L for returning filling of soft/loose soil including spreading,levelling,watering and well ramming in layers n.exc 25 cm complete all as directed.

M&L for removing excavated soil to distances exc 250m but n.exc 500 m and depositing where directed complete all as directed.

M&L for cement concrete Type D2 1:4:8 (40 mm graded aggregate ) in foundations,filling and mass concrete complete all as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as directed.

M&L for flat rough finished surfaces of concrete formwork to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter complete all as directed.

M&L for rough finished square/rectangular formwork to sides of pillars, posts, struts,piers,columns and stanchions complete all as directed.

M&L for rough finished formwork to sides and soffits of floor or roof beams,beam haunchings,girders,bressumers,lintels,cantilevers,shelves including supports,overhangs,etc.also splays between floors and beams complete all as directed.

M&L for rough finished flat formwork to chullah hoods,chajjas,troughs and similar items including edges complete all as directed.

M&L for flat rough finished surfaces of concrete formwork to soffits of suspended slab such as roof slabs,floor slabs,landings and similar work not exceeding 200 mm thick complete all as directed.

M&L for rough finished formwork to edges of concrete flats,treads,breaks in floors,window cills n exc 20 cm wide complete all as directed.

M&L for M-25 (Design Mix) Reinforced cement concrete for foundations,including rafts,footings,foundation beams,plinth beams,bases for columns etc… basement slabs,under reamed piles and mass concrete complete all as directed.

M&L for M-25 (Design Mix) Reinforced cement concrete for columns,pillars,piers,posts and struts complete all as directed.

M&L for M-25 (Design Mix) Reinforced cement concrete for beams,Cantilevers,bressummers,lintels over 1.5 m span complete all as directed.

M&L for M-25 (Design Mix) Reinforced cement concrete for chajjas complete all as directed.

M&L for M-25 (Design Mix) Reinforced cement concrete for slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like complete all as directed.

M&L for TMT steel bars 10 mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia bent to shape required including cranking, bending in strrups, spacers and binders including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed.

M&L for Pre cast RCC (1:2:4) type B1 for cover slab for wardrobes and set in cement mortar (1:6) complete all as directed.

M&L for precast cement concrete block masonary using (Type C1, 1:3:6 20 mm graded aggregate) with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.

M&L for precast cement concrete solid building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) (Type C1 1:3:6 20 mm graded aggregate) setting in cement mortar 1:4 complete all as directed.

M&L for moorum/red bajri filling in floors or pavings,laid in layers n exc 15 cm thick,spread,levelled and rammed including watering complete all as directed.

M&L for 75 mm thick cement concrete type D-2,1:4:8 (40 mm graded aggregate) for subase of floor complete all as directed.

M&L for 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) complete all as directed.

M&L for rendering 15mm thick in two coats ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using WPC on top coat complete all as directed.

M&L for rendering 10mm thick in CM 1:6. finished even & smooth without using extra cement to walls complete all as directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coats of cement base paint over one coat of primer complete all as directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of oil bound distember including primer over 1 to 2mm thick wall care putty finish complete all as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distember along with primer over 1 to 2mm thick wall care putty finish complete all as directed.

S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as directed.

S&F 6.3 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as directed.

S&F Solar control film 25 micron reflective type applied to glass panes as per instructions of manufacturers complete all as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as directed.

S&F framed work such as grills,gratings,etc with ends of bars shouldered and /or riveted,or forged into spikes,framed guard bars,barred iron doors,ladders,framed balusters,walk ways,railings,framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as directed.

M&L for 18/19 mm thick MDF board both side finished as in wardrobe for compartments and drawers all as specified and directed by Engr-in-Charge.

M&L for 6 mm thick MDF board both side finished as in wardrobe for compartments and drawers all as specified and directed by Engr-in-Charge.

S&F 30 mm wide flaps continuous (piano) hinges,mild steel,bright finish or electrogalvanised complete all as directed.

M&L for 2nd class hardwood plain fillets exc 13 sq cm & n.exc 25 sq cm, square,rectangular or triangular in section,clean sawn,secured with nails or brads complete all as directed.

M&L for 100 mm size extruded brass handles,cast type polished bright complete all as directed.

S&F 4 lever brass locks,drawer grade I size 50 mm complete all as directed.

S&F 25 mm dia brass moulded curtain brackets complete all as directed.

S&F 25 mm dia stainless steel curtain rods complete all as directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) 15 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

M&L for providing edge moulding to 18-20 mm thick Granite stone of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as directed.

M&L for vitrified ceramic tiles 10 mm thick (Square / rectangular ) polished,area of each tiles n.exc 0.36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,15 mm thick complete all as directed.

M&L for vitrified ceramic tiles 10 mm thick ,in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,10 mm thick complete all as directed.

M&L for broken stone hardcore of gauge n exc 63 mm,deposited,spread and levelled in layers n exc 15 cm thick,watered and rammed to a true surface complete all as directed.

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate of 75mm thick as in Plinth Protection complete all as directed.

M&L 10 mm thick plastering on roof using CM 1:3 finished even & smooth without using extra cement using WPC complete all as directed.

Supply only water proofing compound complete all as directed.

Supplying and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM complete all as directed.

Supplying and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM (Rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge)

M&L for surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as directed.

M&L for chequered cement concrete tiles of 300x300x25 mm thick,with mixture of white & grey cement in equal proportion & with pigment set,jointed and pointed in neat cement slurry in floors including screed bed of cement mortar 1:6 ,20 mm thick complete all as directed.

M&L for cement concrete type C1 1:3:6 (20 mm graded aggregate) in kerbs or mud stops,rounded or chamfered on edges complete all as directed.

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of brick work,precast concrete block walling or stone boulder masonry,built in cement mortar including all quoins,arches,pillars,etc,complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as directed.

Taking up or down 25 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as directed.

Dismantling 2000 lit water tanks,open or closed,hoisted and fixed in position complete all as directed.

Taking down cement plaster on Brick / Concrete surfaces including raking out joints, hacking for key scrubbing down with water and removing rubbish out of MD Land complete all as directed.

M&L for raking out joints/ pointing to squared rubble masonry,coursed or uncoursed complete all as directed.

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and removing rubbish out of MD Land complete all as directed.

Taking down chowkhats or frames n.exc 1.5 Sqm (without taking off shutters from the frame) complete all as directed.

Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 sqm (with out taking off shutters from the frame) complete all as directed.

Demolition of drain/PVC pipe any dia including fittings complete all as directed.

Dismantling framed timber scantling 40 Sqcm and over in section,in any position complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete as per specification and drawing.

S&F in frame at site 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete as per specification and drawing.

S&F 4 mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as directed.

S&F Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam,tee,angle,channel or flat sections) including distance pieces,cleats etc complete all as directed.

S&F 75 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.

S&F anodised 125 mm extruded aluminium alloy handles fabricated type complete all as directed.

S&F 125 mm aluminium anodised barrel tower bolts of extruded section complete all as directed.

S&F wind ties for roof including securing bolts,drilling holes,notching for wire etc, flat iron fillets including all necessary drilling,bolting or riveting,etc,and similar works conforming to Fe-290-Gde E-165 complete all as directed.

M&L for preparation of new steel surfaces of any description n exc 10 cm width or girth,priming and applying two coats of synthetic enamel paint when unconnnected with other painting or when painted in different tint complete all as directed.

M&L for Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling and mass concrete complete all as directed.

M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bent to shape required including cranking hooping ends, binding in & wire annealed not less than 0.9 mm dia and securing with clips complete all as specified and as directed.

M&L for 100 mm thick type D-2,1:4:8 (40 mm graded aggregate) for sub base of flooring complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall,fixed with self tapping screws complete all as directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall,fixed with self tapping screws complete all as directed.

S&F 2.00 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof,wall etc complete all as specified and as directed.

M&L for coloured nonskid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,15 mm thick complete all as directed.

S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.

S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as directed.

S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.

S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints fixed to walls complete all as directed.

S&F PVC (SWR) bends 75 mm with access door complete all as directed.

S&F PVC (SWR) bends 110 mm with access door complete all as directed.

S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as directed.

S&F PVC (SWR) junction single,(single T) 75 mm with access door complete all as directed.

S&F PVC (SWR) 110 mm vent cowl complete all as directed.

S&F PVC (SWR) 75 mm vent cowl complete all as directed.

M&L for 75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as directed.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as directed.

M&L for rendering 10 mm thick cement mortar 1:4 on stone masonry surfaces or surface other than fair faces of brick work or on one side of lathing complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as specified and directed.

M&L for rendering 5 mm thick in CM :1:3, finished even & smooth without using extra cement to ceiling all as specified and as directed.

M&L for raised pointing to squared rubble masonry,coursed or uncoursed using cement mortar 1:4 complete all as directed.

M&L for preparation of Newly Plastered surfaces of wall and applying Three coats of white wash all as specified and directed.

M&L for preparation of Newly Plastered surfaces of ceiling and applying Three coats of white wash all as specified and directed.

M&L for APP based polymeric membrane minimum weight 3 Kg/ Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt.not less than 150 gms/Sqm) land on primed surface by forced application complete all as directed.

M&L for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed.

S&F in repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. including PVC Flushing cistern,PVC connection 450 mm and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor complete all as specified & directed.

S&F in repair Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) including PVC connection 450 mm long complete all as specified & directed.

S&F in repair Vitreous china urinal, half stall urinal white with grating and union of discharge pipe (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and 32mm dia PVC waste pipe including 450mm long PVC connection 15mm dia brass CP push Cock & 15 mm dia urinal spreader of PTMT complete all as directed.

S&F in repair vitreous china urinal partition white of size 310x700 mm complete all as directed.

Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F for 25 mm dia Ball valve complete all as directed.

S&F for 20 mm dia Ball valve complete all as directed.

S&F rotational moulded polyethylene water storage tanks 2000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia float valve and HDPE 25 mm water tank nipple complete all as directed.

S&F in repair 15 mm stop valves,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm Bib taps,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm bore stop valves concealed type, cast copper alloy,fancy type,chromium plated with long shank and cup washers complete all as directed.

S&F in repair 15 mm Swivel shower with shower arm of PTMT any colour complete all as directed.

S&F in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as directed.

S&F 450 mm long 15 mm size with PTMT nuts complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as directed.

S & F underground Double wall Corrugated (DWC) pipe,150 mm nominal size (ID 148.50 mm & OD 172.50 mm) SN-4,in any length,with rubber ring joints including all fittings,conforming to IS-16098 (Part-2) laid in trenches and testing on completion complete all as directed.

M&L for PCC 1:3:6 type B2 using 40mm graded stone aggregate in foundation concrete as in foundation filling complete all as directed.

M&L for concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing under and haunching against sides for 150 mm dia pipe complete all as directed.

M&L Rendering 15mm thick in CM 1:4. finished even & smooth without using extra cement to walls all as specified and directed.

M&L cement concrete 1:2:4 type B 2 (using 20mm graded coarse aggregate) as surface channels and drains complete all as directed.

M&L for cutting into existing manholes for connecting new drains,making good to pipe and rendering,cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required complete all as directed.

M&L for cutting into existing manholes for removing existing branch drain,making good to walling and rendering,cutting out branch channel and making good benchings complete all as directed.

S&F 150 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.

S&F Second class hardwood 35 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as directed.

S&F 250 mm long aluminium alloy,anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as directed.

M&L for preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330 mm x 160 mm complete all as directed.

M&L for roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water and brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.

Taking down & refixing shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as directed.

M&L for Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.complete all as directed.

S&F brass chromium plated shower rose 125 mm size complete all as specified and as directed.

S&F PVC (SWR) branch piece,double (double Y) equal or unequal 75 mm with access door complete all as directed.

M&L for rendering 20mm thick in two coats i.e 10mm thick in CM 1:4 and 10mm thick CM1:6 with WPC in top coat as in lathing or stone masonry wall complete all as directed.

S&F 610 x 760 x 254 mm SS kitchen plate rack complete all as specified and directed. Cat No P330 of Make Prayag or Equivalent.

M & L for Point wiring concealed type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit 'medium grade' with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including MS/pressed steel terminal box (wall thickness 1.2mm) suitable for modular switch, socket, fan regulators etc of suitable module including cutting chases in wall/ceiling and making good using PCC 1:2:4 type B1/ cement mortar 1:4, finished the surfaces smooth to match with the existing for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as directed and specified for :-

(a) One light or fan point controlled by one 5 Amps switch one way complete all as directed.

(b) One 3 pin socket point 5 Amp on independent board complete all as directed.

(c) One 3 pin socket point 5 Amp on same board with other switches complete all as directed.

All same as per item No 150 here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as directed.

All same as per item No 150 here-in-before but with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amp switch socket combination outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as directed.

S & F modular switch 6 Amp, 1 module, flush type one way 230 volts complete all as directed.

S & F modular switch 16 Amp, 1 module, flush type one way 230 volts complete all as directed.

S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body including supply and fix PVC square blocks complete all as directed.

S & F modular fan regulator 5 step high speed, 120 Watt and above, 2 module, 230 volts, ergonomically designed directional knob with 360 degree rotation , ISI marked complete all as directed.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed by Engr-in-charge.

S&F in replacement 42 W 2x2' LED FittingsEnvironmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed by Engr-in-charge.

S&F in repair bldg LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm x 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as directed.

Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as directed.

Supply and fix in replacement Sheet metal enclosure (ISI marked) TPN MCCB DB , 415 volts, 4 way double door type, neutral copper bus bar for housing MCB and fixed and tested on completion complete all as directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 12 way horizontal type double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S & F MCB single pole and neutral Amps 240 volts, 10 KA rupturing capacity providing in DB complete all as directed.

S & F MCB single pole 6 to 32 Amps 240 volts, 10 KA rupturing capacity providing in DB complete all as directed.

Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100 Volt grade on walls with fixing acessories of 25 Sqmm 4 Core complete all as directed.

M&L for sand coarse filling in trenches obtained from local river for cushioning of UG cable complete all as directed

Supply and lay common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as directed

M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion including dismantling of old earthing materials complete all as directed

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as directed.

M&L, Switch piano, flush button single pole, 6 Amps one way complete all as directed.

S&F in repair bldg security light fittings 1x 20 Watt LED street light with cast aluminium housing, toughened flass diffuser, IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size complete all as directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 4 way, 415 V horizontal type, double door, for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 16 Sqmm 2 Core complete all as directed.

S&F mild steel galvanized pipe 40mm dia bore light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site complete all as directed.

Supply and lay steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc of size 25 mm dia complete all as directed.

S&F 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as directed.

S&F, 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

S&F Switch Socket Combination flush type 5 Amp 2 in 1 complete all as directed.

S&F Switch Socket Combination flush type 5/16 Amp 5 in 1 complete all as directed.

S&F LED tube light fitting of 10 watts 6000K , 230 volt, with Basic all purpose surface and wall mounted LED batten with Aluminum housing & integrated electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engr-in-charge.

S&F Exhaust fan AC single phase 230 volts, heavy duty of size 300mm sweep metallic body with louvre shutter,including connecting up 3 core flexible copper wire 24/0.20 sqmm from ceiling rose to fan terminal etc complete all as directed.. NOTE: Quoted rate deemed to be included for providing hole by opening in any type of walls in the building including neccessary plastering, grouting of nuts & bolts and washers suitable size and neccessary fixing arrangement for fixing louvre and including making good to disturbed surface area to its original position.

Supply and fix Water heater storage type, electric,capacity 25 litres with PVC hot/cold pipe connection complete all as directed.

Supply and lay steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc of size 15 mm dia complete all as directed.