TPJ Divn - Proposed construction of running room (10 beds at TTP, 4 beds at AGX) , Gang rest room , Minor goods shed, SSE office JE office, OHT - Electrical arrangements. -Wroks contract

conditions removing obstruction if any including tools & plants, labour etc., and as per instruction of site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016.

Description:- Excavation of cable / pipe trench and pits of required width, length in mixed soils

site Engineer in charge and as per drawing No: DRM/EL/TPJ/40-2016. Note:This item should be used for track crossing.

instruction of site Engineer in charge.

04 Description:- Demolishing plain cement concrete including disposal of material within 50m.

cement, sand etc and tools & plant labour etc., and as per instruction of site Engineer in charge for plinth and as required at site

06 Description:- Supply and Laying of one layer of country bricks (breadth wise) closely

complete with accessories.nb: LTUG cable of suitable size only will be supplied by Railways.

08 TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY 08 Description:- Laying and testing of LTUG Power cable of above 50 sqmm but up to and including

Description:- Supply and termination and connection of LTUG cable of sizes of up to and including

termination comprises of one number of single compression type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.

Description:- Supply and termination and connection of LTUG cable of sizes above 50 sqmm but up

gland.Note: One termination comprises of one number of single compression type brass cable gland and with four numbers of aluminium crimping sockets for all cores of the cable.

of necessary accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway.

accessories such as straight through coupler etc. nb: HDPE pipe of suitable size only will be supplied by Railway.

13 Description:- Refilling of cable trench and pit by excavated soil

Description:- Fabrication, supply and fixing of clamps made out MS flats for fabrication of clamp for fixing of cover for existing power cable / enclosures made out of sheet metal given in this schedule

by the engineer in charge and using GI bolts with nuts of suitable size for fixing.Note: This shall be made use for fixing of cover for existing power cable and new enclosures other than enclosures already covered in the schedule.

Description:- Fabrication, supply and fixing of cover for existing power cable / enclosures made out

Engineer in charge. This also includes supply and fixing of all required accessories required for fixing. When used for making of enclosures all accessories for weather proofing shall also be supplied.

flat size 40mm x6mm x 350mm length concreting and coping, painting etc complete with all other accessories as per drawing No: CEE/CN/MS/11-2004.

(2004), for cable leading without clamps.

(2004) , for cable leading without clamps

of up to and including 50 sqmm

of above 50 sqmm but up to and including 185 sqmm.

accessories like base plate, including supply of two coats of each Zinc chromate primer, aluminium paint as per drawing no CEE/CN/MS/20-2004.

Description:- Fabrication, supply and fixing of cable looping box with aluminium bus bars as per 23 drawing No:DRM/EL/TPJ-10-2015 TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY

weather proof enclosure including internal wiring.

the DMC board including all the other accessories.

duty GI pipe 50 mm dia with ISI mark complete with all other accessories as per Drawing. No EL / P / Type 1022.

electrical installations to earth pipe.

wiring and with required accessories.36

30 Description:- Supply and fixing of 63 Amps Four pole DMC connector for cable termination.

with bolted HRC fuses and sheet steel enclosure conforming to IS/IEC 60947-3 with duty AC 23 A complete with all other accessories .

bolted HRC fuses and sheet steel enclosure conforming to IS/IEC 60947-3 with duty AC 23 A complete with all other accessories .

bolted HRC fuses and sheet steel enclosure conforming to IS/IEC 60947-3 with duty AC 23 A complete with all other accessories

Description:- Supply, erection, testing and commissioning of single phase double door MCB

numbers of 6-32 Amps SP-MCB in the outgoing side, all of 'C' series rating and 10KA capacity including internal wiring with associated bus bars, earth bar, DIN Channel etc complete with all other assessories.

Description:- Supply, fixing, testing and commissioning of Three phase 4 way (8+12) , horizontal

internal wiring, bus bars, earth bar, DIN Channel etc complete with all other assessories.

Description:- Supply, fixing, testing and commissioning of Three phase 12 way (8+36) , horizontal

including internal wiring, bus bars, earth bar, DIN Channel etc complete with all other assessories.

module type, in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675501 of Mylinc model of M/s. Legrand make or equivalent

module type in the already fixed modular type switch board including internal wiring. This shall be similar to cat. Ref. No:675550 of Mylinc model of M/s. Legrand make or equivalent.

Description:- Supply and provision of modular type socket of 6 A / 16 A capacity, three pin

wiring. This shall be similar to cat. Ref. No:675555 of Mylinc model of M/s. Legrand make or equivalent. TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY

one module type, in the already fixed modular type sub control board, including internal wiring. This shall be similar to cat. Ref. No:675511 of Mylinc model of M/s. Legrand make or equivalent.

similar to cat. Ref. No:675531 of Mylinc model of M/s. Legrand make or equivalent

modular type switch board already fixed. This shall be similar to cat. Ref. No:675590 of Mylinc model of M/s. Legrand make or equivalent

Description:- Supply and wiring of extension mains through PVC pipes already fixed / embedded by

wiring cable including green colour wire for earth of 1.50 sqmm size, conforming to IS.694, 2010 as per specification.Note : 3 runs of 1.50 sqmm copper cable added together shall be taken as 1m for measurement purpose.

Description:- Supply and wiring of extension mains through PVC pipes already fixed / embedded by

wiring cable including green colour wire for earth of 2.50 sqmm size, conforming to IS.694, 2010 as per specification.Note : 3 runs of 2.50 sqmm copper cable added together shall be taken as 1m for measurement purpose.

Description:- Supply and wiring of extension mains through PVC pipes already fixed / embedded by

wiring cable including green colour wire for earth of 4.00 sqmm size, conforming to IS.694, 2010 as per specification. Note : 3 runs of 4.00 sqmm copper cable added together shall be taken as 1m for measurement purpose.

Description:- Supply and wiring to light and fan points with 3 runs of 1.50 sqmm PVC insulated

through PVC pipes already fixed / embedded (up to and including 3 m long point ) Note: One set is for one point wiring complete as per the above description and green colour wire to be used for earthing.

Description:- Supply and wiring to light and fan points with 3 runs of 1.50 sqmm PVC insulated

through PVC pipes already fixed / embedded (above 3 m but up to and including 5 m long points) Note: One set is for one point wiring complete as per the above description and green colour wire to be used for earthing.

Description:- Supply and wiring to light and fan points with 3 runs of 1.50 sqmm PVC insulated

through PVC pipes already fixed / embedded (above 5 m but up to and including 7 m long points) Note: One set is for one point wiring complete as per the above description and green colour wire to be used for earthing.

flexible copper cable, 1100 V grade, conforming to IS.694 2010.

This shall be similar to cat ref. LSCR03 of M/s Luker make or equivalent.

be supplied by railways.

complete set only will be supplied by Railway.

Description:- Supply and provision of 19/20 mm dia M.S. conduit pipe to the required length 53 including necessary threading on either ends for suspension of box type LED luminaire / ceiling fan including smooth painted surface of required colour complete with all other accessories. TRICHCHIRAPPALLI DIVISION-ELECTRICAL/SOUTHERN RLY

wall opening, fixing of frame and plastering complete and with all required accessories.

frame and plastering complete and with all required accessories.Note : Exhaust fan will be supplied by the railways.

56 Description:- Supply and fixing of angle type PVC batten holder.

.LBCOL05 of M/s Luker make or equivalent

This shall be similar to cat ref. LBKOVSL12 of M/s Luker make or equivalent.

similar to cat.Ref. LMR 12 of M/s Luker make or equivalent.

with all the other accessories. This shall be similar to cat.Ref. LODFTG3 of M/s Luker make or equivalent

61 Description:- Installation of above AC at the location as instructed by the Engineer-in-charge

62 Description:- Supply and fixing of RCCB 25Amps, 30mA for Geyser

of SP MCB of 20 A rating for AC & Geyser etc including fixing in a concealed manner

64 Description:- Supply and fixing of PVC Round block with required fixing accessories.

such as GI bolts with nuts etc as per the instructions of Engineer-in-Charge.

Description:- Supply and fixing of loop in -loop out box of size 270x225x135mm, made of SMC.

100A per way DMC connector block, duly pre wired and provision of the same using suitable clamping arrangement, as directed by Engineer incharge at site.

complete with required accessories as per standard. nb: submersible pump set and control panel only will be supplied by Railway.

accessories, straight through couplers etc including required fabrication works.