CO Tehsil building at Ghanari Distt Una SH CO Main building WS and SI site development septic tank and rain water harvesting tank court yard etc

Amount

Excavation in earth work in foundation and trenches etcetera in all kind and classification of soil such as pick work, jumper work, pick jumper work, blasting work and hard blasting work and saturated soil any other mixed verity of soil in dry or saturated condition upto any depth and lift upto any height including chiseling/wedging out rocks where blasting prohibited dewatering pumping or bailing out water where required and/ removal of slush seprately as directed which may arise during the execution including stacking the serviceable and unserviceable material and then returning stacked soil in any thickness of layers when required into plinth side of foundation etcetera consolidating each deposited layers by ramming and watering then disposing of all surplus unserviceable excavated earth as specified dumping place as per the direction by Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentialss. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Excavation in drain and channel etcetera in earth work in all classification of soil such as pick jumper work blasting work in soft soil and hard rock saturated soil any other mixed varity of soil in dry of saturated conditions upto any depth and lift/height including dressing of side bed and disposing of all surplus excavated earth upto all lead disposed earth to be levelled and neatly dressed as per the direction by Engineer in charge including entire carriage of material with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete any height as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in foundations, footings, bases of columns and mass concrete and plain concrete including plinth beams and columns upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work up to all floor level as per HPPWD specifications in beams cantilevers, girders and lintels, sides and soffits of beams ,beam haunchings, cantilivers , bressumers and lintels upto any depthin all height from floor as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in columns, pillars, posts and struts square rectangular polygonal in plan upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etcetera upto any thickness upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in stair cases with sloping or stepped soffits, excluding landings upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per HPPWD specifications in edges of slab and breaks in floor and walls upto any width in all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 mechanically mixed (One cement : five sand : ten graded crushed stone aggregate 40 mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeter) nominal size and curing complete excluding cost of form work in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 mechanically mixed (one cement:three sand: six graded crushed stone aggregate 40mm (forty millimeter) nominal size excluding cost of centring and shuttering in foundation and plinth as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings, bases of columns and the like and mass concrete upto all height depth and HPPWD specification approved drawing design as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels, beams, girders, bressumers,and cantilevers upto all height and HPPWD specification and approved drawing design as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs landing and shelves and their support balconies, beams, girders bressumers and cantilever upto any floor level/height and HPPWD specification and approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts upto any floor level and HPPWD specification and approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in wall (any thicknessbut not less than 0.10 m thickness) attached pillasters, buttresses, plinth and string courses etcetera from top of foundation level upto any floor level and HPPWD specifications and approved drawing and design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix to obtain the minimum crushing strength of 25N/mm² (twenty five Newton per millimeter square) graded/crushed stone aggregate 20mm (twenty millimeter) nominal size with minimum cement contents of 400 kg (four hundred kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto any floor level/height and HPPWD specification approved drawing design as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-20 design mix graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cement contents not less than at the rate of 360 kg (three hundred sixty kilogram) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcementt for reinforced concrete work in columns, pillars, posts and struts upto any floor level inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-20 design mix graded crushed stone aggregate 40mm (forty millimeter) nominal size and cement contents not less than at the rate of 360 kg (three hundred sixty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-20 design mix graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cement contents not less than at the rate of 360 kg (three hundred sixty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in foundation and plinth inclusive as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-20 design mix graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cement contents not less than at the rate of 360 kg (three hundred sixty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness) but not less than 0/10 mtr. thickness including attached buttresses pilasters, plinth and string courses etcetera from top of foundation and their caps upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete M-20 design mix graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cement contents not less than at the rate of 360 kg (three hundred sixty kilogram) per cubic meter mechanically mixed including curing complete excluding cost of form work in suspended floor roofs, landing and shelves and their support balconies, beams, girders bressumers and cantilever upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed upto floor two level reinforced cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size to give a smooth and even surface including centring and shuttering etcetra but excluding cost of reinforcement in string course, copings bed plates, anchor blocks, plain windows sills and the like upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying upto floor two level reinforced cement concrete 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size mechanically mixed and curing complete including cost of form work in mouldings as in cornices windows sills etcetera not exceeding 15cm (fifteen centimeter) in girth to give smooth and even surface upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:1:2 (one cement: one sand: two graded crushed stone aggregate 12.5mm (twelve point five millimeter) nominal size mechanically mixed including complete exlucding cost of form work in superstructure including water proffine and curing complete upto all floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. (two point seven five kilogrmme) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand) as directed by the Engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government

Providing and laying 1:8:16 (one cement: eight sand: sixteen graded crushed stone aggregate 20mm (twenty millimeter) nominal size and curing complete on slab and floor excluding cost of form work in screed laid under flooring as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing Tor steel reinforcement approved make i.e. SAIL, RINL, JINDAL, PANTHER OF (JSPL), SHYAM STEEL for reinforced cement concrete work including bending binding straightning and placing in position complete including cost of binding wire upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:6(One cement: six sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in superstructure above plinth level in cement mortar 1:6(One cement: six sand) in all heights / any floor level and as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks in foundation and plinth in cement mortar 1:4(One cement: four sand) in all heights / any floor level and as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work using common burnt clay Second class building bricks 23 CM thick Rat Trap Bond (on three inch edge) in superstructure in cement mortar 1:4(One cement: four sand) in all heights and depth as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry using common burnt clay Second Class building bricks in foundation and plinth in cement mortor 1:3(one cement: three sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Half brick masonry using common burnt clay Second Class building bricks in superstructure above plinth level upto any floor level/height in cement mortor 1:4(one cement: four sand) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded crushed stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for doors, window, ventilators and gloazed partitions frames with extruded built up standard tubular and other sections of approved Hindalco, Jindal, Indian Aluminum CO. approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) size 127 x 44.45 x 3.18mm (one hundred twenty seven into four four point four five into three point one eight millimeter) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for doors windows and ventilatiors and glazed partitions frames as per architectural drawings as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular and other sections as approved make of Hindalco, Jindal, Aluminum CO. conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for shutters of doors windows and ventilatiors including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) as per architectural drawingsas per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 5.50mm (five point fifty millimeter) thickness (weight not less than 13.75 kg/ sqm (thirteen point seventy five kilogram oblic per square meter) in aluminium door, window, ventilator shutters make of Hindal Co., Jindal, Indian aluminum Co. and partition etcetera with PVC/neoprens gasket etcetera complete upto any floor level/height as per the architectural drawings and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing glazing with glass panes of 4.00mm (four point zero zero millimeter) thickness (weight not less than 10.00 kg/ sqm (ten point zero zero kilogram oblic per square meter) in aluminium door, window, ventilator shutters make of Hindalco, Jindal, Indian aluminum CO and partition etcetera with PVC/neoprens gasket etcetera complete upto any floor level/height as per the architectural drawings and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing fly wiremesh to aluminum shutters of door windows and ventilators complete. as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etcetera complete any floor level/ height including making good the floors as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick Prelaminated board both side bwp phenol bonded in matt finish make of Novapan, Kitply, National, Archidply, Action Tera, Green IS No. 12823 as per approved shade of Kit vista of Kit ply or Green ply exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron but hinges with necessary screwes 40mm (forty millimeter) thick frame upto any height/floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium grill pattern G-07 make of Hindalco, Jindal, Indian aluminum, CO anodised powder coated pattern in aluminum frames of window 125 x 42.4 x 1.4mm (one hundred twenty five into forty two point four into one point four millimeter) window with 80mm x 80mm (eighty millimeter into eighty millimeter) panels holes with 25 x 8mm (twenty five into eight millimeter) thick aluminium flat in windows including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) upto any floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300x16mm(three hundred into sixteen millimeter ) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) anodized aluminum sliding door bolt anodized colour and shade with bolts and nuts screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter ) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter ) aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminum handle anodized transparent or dyed to required colour and shade with necessary screws etcetera complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness complete upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 300mm (three hundred millimeter) bright finished hard drawn hooks and eyes as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing second class deodar wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeter) thick plain framed panelling with necessary screws priming coat on unexposed surface etcetera complete. with second class deodar wood any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter)thick water proof commercial board make of Novapan, Kitply, National, Archidply, Action Tera, Green in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeter) thick water proof commercial board make of Novapan, Kitply, National, Archidply, Action Tera, Green in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimeter) thick coloured or plain lamination sheet (sunmica)make of Novapan, Kitply, National, Archidply, Action Tera, Green on boards/ply wood sheets with approved adhesive and nails etcetera complete any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick water proof kitply of standard quality ISI mark and make of Novapan, Kitply, National, Archidply, Action Tera, Green and approved shade and and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured abd paid for separately) upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 3mm (three millimeter) thick veneered decorative plywood lining make of Novapan, Kitply, National, Archidply, Action Tera, Green with decorative surface on one face with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) upto any floor level/ height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing cup board/cabin with 19mm (nineteen millimeter) thick commercial board box make of Novapan, Kitply, National, Archidply, Action Tera, Green, 8mm (eight millimeter) thick backing and 19mm (nineteen millimeter) thick commercial board shutters with piano hinges including providing 6mm (six millimeter) thick beeding of deodar wood on exposed surfaces of commercial board including maganate catcher and PTFT handle 125mm (one hundred twenty five millimeter) size and polishing the internal surface with melamine polish including 1.00mm (one point zero zero millimeter) thick sunmica on outer surface of cupboard shutters including providing cupboard lock as per architectural drawings complete in all respects any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing readymade steel Almirah made of Godrej of 16 gauge. The height of Alimrah should not be less than six feet and width three feet finshed with powder coating with necessary screws etcetera complete as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Prtoviding and fixing ACP Tiles size 60 x 60 cm (sixty into sixty centimeter) ceiling over main beam and T-section frame with specified necessary screws etcetera as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab 55x55cm (fifty five into fifty five centimeter ) minimum size having one shade only with 7.5cm (seven point five centimeter) wide while marble band as per approved pattern and to be mirror polished flooring 20 mm (twenty millimeter) (average) thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 25mm (twenty five millimeter) thick upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Kota stone slab 55x55cm (fifty five into fifty five centimeter ) 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement :three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 7.5 cm (seven point five centimeter) wide sepen pine white marble band (table rubbed and polished) in flooring 20mm (twenty millimeter) thick base in cement mortor 1:3 (one cement: three sand) including jointing with cement mortor 1:2 (one cement: two sand) wirth an admixture of pigment match the shade of the marble as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 40mm (forty millimeter) thick cement concrete flooring with ironite mix 1:2:4 (one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size laid in one layer finished with a floating coat of neat cement as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster skirting (upto 30cm (thirty centimeter) height with cement morter 1:3 (one cement: three sand) finished with a floating coat of neat cement including rounding of junction with floor complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying marble work with semiround nosing (table rubbed and polished) in flooring 20mm (twenty millimeter) thick base in cement mortor 1:3 (One cement :Three sand) including jointing with cement mortar 1:2 (One white cement :Two marble dust) with an admixture of pigment to match of the shade of marble 20mm (twenty millimeter) thick white makrana marble complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 10 (Ten ) milimetre thick antiskid water proof stain and impact resistant heavy duty vetrified tiles make of Somany, Orient, RAK, Johnson & Johnson of Nitco or Kazaria 605 x 605 x 10mm ( Six hundred five into six hundred five into ten millimeter) manufactured of approved shade and colour in flooring ,treads of steps and landings laid over 12 (Twelve) milimetre thick cement mortor 1:3 (one cement :three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying Grade-IV spartic ceremic tiles 5.5 ( Five point five ) milimeter thick in flooring make of Kajaria, NITCO, Somany orient, RAK, Johanson & Johanson {(300x300mm/ 400 x 400 mm (three hundred into three hundred milimeter / four hundred into four hundred millimeter) size treads of steps laid on bed of 12 ( Twelve ) milimeter thick cement mortor 1:3 (one cement :three sand ) finished with flush pointing in white cement complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying sand stone slab flooring 40mm (forty millimeter) average thick on 20mm (twenty millimeter) average thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1.8mm (one point eight millimeter) thick PVC antistatic Venyl (make of Wonderfloor, Royal House) Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

White glazed tiles dado 300mm x 450mm x 6mm (three hundred millimeter into four hundred fifty millimeter into six millimeter) thick of approved grade make of Kajaria, NITCO, Somany, Orient, RAK, Johanson & Johanson in skirting ,riser of steps and dado 12 (Twelve) milimeter thick cement mortor 1:3 (one cement :three sand ) and jointed with white cement slurry complete upto any floor level/ height as per directed by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Extra for making semi round nosing in granite stone in treads of step, skirting, dado etcetera rubbing and granite polish complete upto any floor level/ height including returned moulded ends and angles to moulding as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeter) wide and 4 mm (four millimeter) thick glass strips in joints of terrazzo floors complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter ) thick prepainted steel sheet of TATA Durashine over steel trusses made of cold rolled steel coil with apoxy coating of 25 (twenty five) microns having a puff depth of 50mmm (fifty millimeter) and weight of 35-37 cum (thirty five to thirty seven cubic meter)steel frame are to be painted of approve shade sample including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accesoriees as required complete and get between the roof at the base point to be closed with masonary any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeter ) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets of TATA Durashine with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing valley 60 cm (sixty millimeter) overall 0.60mm (zero point six zero millimeter ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet of TATA Durashine with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) dia pipe on wall face PVC (Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make) rain water pipes of working pressure not less than 4.5 kg/sq. cm (four point five kilogramme per square centimeter) including filling the joints with approved adhesive complete upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps 100mm (one hundred millimeter ) dia of approved design to CI or SCI pipe, embeded in end including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 mix (one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size and cost of cutting holes and making good the wall etcetera complete in all heights and as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimeter) dia on wall faces PVC (Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make) accessories for rain water pipes including filling the joints with approved adhesive complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PVC shoe 150mm (one hundred fifty millimeter) dia on wall faces PVC (finolex make) accessories for rain water pipes including filling the joints with approved adhesive complete any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.BP Sheet makes of TATA Durashine 1.66 to 2.00 ( One point sixty six to Two point Zero Zero) milimeter thick in eaves board /facia/soffit /ceilng including cutting ,fixing and welding to steel roof members and applying a coatof red lead primer complete upto any height as per direction by the Engineer in charge (base member of steel work shall be measured and paid for separately) complete in all respect including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 30 cm (thirty centimeter) wide 30 cm (thirty centimeter) deep (minimum) overall semicircular plain G.I. Sheet make of TATA gutter with iron bracket 40 x 3mm (forty into three millimeter)size bolts and nuts and washers etcetera including making necessary connection with rain water pipe complete as per design 0.63mm (zero point six three millimeter) thick sheet including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of.Sail, Tisco, RINL, Jindal, Pantner of (JSPL) Shyam Steel ,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in gratings framed guard bars, ladders, railling, brackets and similar works complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of Sail, Tisco, RINL, Jindal, Pantner of (JSPL) Shyam Steel,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings complete upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work approved make of Sail, Tisco, RINL, Jindal, Pantner of (JSPL) Shyam Steel,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the likeupto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. hollow pipe 100mm (one hundred millimeter) make of TATA, Jindal (Hisar) Parkash Steel Tube, Bhushan Industries of standard and suitable using fasteners with nut and bolts including anti corrosive epoxy paint complete as per the directions of Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing steel railing in ramp for handicaped made of chromium plates 50mm (fifty millimeter) dia steel pipe slip resistant with round ends two level at 75 cm (seventy five centimeter) and 90 cm (ninety centimeter) height and suported with 25mm (twenty five millimeter) dia steel pipe duly welded to the blausters should extend 30cm beyond at the top and bottom of ramp and fixing in position complete upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 85 cm (eighty five centimeter) high first class Indian Teak Wood 75mm x 62.5mm (seventy five millimeter into sixty two point five millimeter) rounded hard rail having baluster of 19mm x 19mm (nineteen millimeter into nineteen millimeter) size and 12mm x 12mm ( twelve millimeter into twelve millimeter) MS solid square bars in combination with MS flat of 19mm x 6mm (ninteen millimeter into six millimeter) size with MS hollow pipe hand rail baluster dully welded/jointing with electric gas welding with top MS flat upto any height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing grab bar in handicapped toilet made of cromium plate 40mm (forty millimeter) dia steel pipeat 78 cm height with M.S. plate 10mm x 100mm x 5mm (one hundred muillimeter into one hundred millimeter into five millimeter) thick embeded in cement concrete block complete as per HPPWD specifications, approved drawings, designs and entire satisfication as per the directions of Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat over make of ICI, Nerolac, Berger, Asian Paint, Shalimar new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete in all height with ready mixed priming paint brushing red lead, Red-oxide/zinc oxide chrome as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surfaces with enamel paint make of ICI (Dulux Glors) Nerolac Berger (Luxol High Glors) Asian Paints premium Apcolite Glors) Shalimar other than white brushing to give an even shade including cleaning of all dirt,dust and other foreign matter complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying priming coat make of ICI, Nerolac, Berger, Asian Paint, Shalimar over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting readymixed paint brushing wood primer pink complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint make of ICI (Dulux Glors) Nerolac Berger (Luxol High Glors) Asian Paints (premium Apcolite Glors) Shalimar other than whire to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping with enamel paint other than white complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with ready mixed paint make of ICI (Dulux Glors) Nerolac Berger (Luxal High Glors) Asian Paints (premium Apcolite Glors) Shalimar brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with paint other than whire in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint of Nerolac, Berger (Bison Acrylic) Assian Pains (Tractor Acrylic) , Shalimar make for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and applying of Birla white level plaster over prepared surface including grinding, chiseling pre-wetting,cleaning with wire brush to remove dirt, dust, grease, oil etcetera level plast to be mixed thoroughly with mechanical stirrer/manually by adding 23 to 26% (twenty three to twenty six percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application coat thickness to be between 3-12mm (three desh twelve millimeter) after cleaning the surface patch coat of level plast to be applied to ceiling upto any height to fill all pores honey combing areas using hand trowel after complete any height drying of patch plaster finish coat of level plast applied with hand trowel and finishing the same with aluminium bottom at the time of application applicator should wear hand gloves white using level plast. Providing and applying two coat of Birla white wall care putty with a maximum thickness of 1 to 1.5mm (one to one point five millimeter) over base coat of level plast inluding pre-wetting, cleaning of blade marks, removal of loose particales etceteraWCP to be mixed thoroughly with mechanical stirrer/manually by adding 35 to 40% (thirty five to forty percent) of clean potable water and waiting for 5 to 10 (five to ten) minutes before application second coat to be applied after 2 to 3 (two to three) hours of complete any height drying of 1st coat and after rubbing with emery paper of size 500 (five hundred) and above to remove the putty blade marks complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand)as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:6 (one cement: six sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:3 (one cement: three sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level in all height including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm (eighty millimeter ) in girth and finished even and smooth in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with water proofing cement paint of ICI, Nerolac, Berger, Asian Paint, Shalimar make and if required on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, and remains of loose powdered materials etcetera including sand paper smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 8mm x 12mm (eight millimeter into twelve millimeter) groove in plaster of 20 cm (twenty centimeter) interval as/ Elevetion in cement mortor 1:4 (one cement: four sand) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

20mm (twenty millimeter) thick plain cement mortor bands in cement mortor 1:4 (One cement: four sand) upto 300mm (three hundred millimeter) in width raised moulded cement mortor band as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering (two coats) make of Berger (Castle), JENSON & NICHOLSON (J&N), Golden, Paints Aqualac with oil bound washable distemper of Nerolac, Berger (Bison Acrylic) Assian Pains (Tractor Acrylic) , Shalimar make and of required shade on undecorated ceiling surfaces or sloping of roofs to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper make of Berger (Castle), JENSON & NICHOLSON (J&N), Golden, Paints Aqualac and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with doctor fixit, fast flex or equivalent with two component polymer modified cementitious coating consisting of material comentitious power and a polimer liquid in two coat for first coat clean and saturate surface and then applying a coat of Dr. fixit and the same process shall be extended upto 300mm (three hundred millimeter) vertically and second coat of shall be applied in opposite direction after four to six hours of application of firstly coat then sprinkle sand on top surface of applied Dr. fixit then apply cement mortor 1:4 (one cement: four sand) and admixed with 200ml (two hundred millilityer) of pidiproof LW 200 ml (two hundred milliliter) per 50 kg (fifty kilogram) bag complete in all height as per the architect drawing including entire carriage of materials with in all leads and lifts and other incidentials as per the directions of Engineer in charge . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed or dry brick/stone/aggregate 40mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand including preparation of ground complete in all height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty millimetre) thick with cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregate 20mm (twenty millimetre) nominal size with 230mm (two hundred thirty millimeter) dia half round stoneware pipe drain as directed by the Engineer in charge with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing laying spreading and compacting sub base by providing well graded crushed material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 401 in grading-I material and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-Ten) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification Clause 802, 803, 1202 and 1203 as per the direction of the Engineer-in-charge , including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royalty, Malkana, toll tax , goods service tax, labour cess or other taxes imposed by the Government.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80mm (Eighty millimetres) ISI M-40 (M-forty) grade NTC make as per drawings and Technical Specification Clause 1504. including carriage of materials in all leads, lifts and other other incidental and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of materials within all leads , lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeter) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings make of B.S.T. Jindal (Hissar), Tata Steel Tubes Ltd. Prakash Surya (earth work in trenches to be measured and paid separately) complete in depth all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1000 (one thousand) litres net capacity tank PVC water storage tank (SINTEX) three layers technology of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1216 (16 mm O.D. pipe) Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe kitech make U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one meter spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 1620 (20 mm O.D. pipe) Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe kitech make U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one meter spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing equal tees 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing equal tees 1620 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing reducing tees 1620 x all branches composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female branch tees 1216 x 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female elbows 1216 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing female elbows 1620 x 15 mm thread composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1216 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Couplers 1620 composite end seal compression fittings kitech make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia high pressure PVC spigot and socket,waste and ventilating pipes Finolex make with working pressure 4kg per sqcm including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia high pressure PVC spigot and socket,waste and ventilating pipes Finolex make with working pressure 4kg per sqcm including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC Collars Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia PVC Collars Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC plain bend Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia PVC plain bend Finolex make including fixing with approved adhesive etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) dia PVC Clamps Finolex make including fixing with approved adhesive with steel screws and rawal plugs etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia PVC Clamps Finolex make including fixing with approved adhesive with steel screws and rawal plugs etcetera complete in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110 x 90mm (one hundred ten into ninety millimeter) PVC floor trap make of Finolex self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete upto all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Orissa Pattern Cera , Parryware, Hindwaree, Sanitaryware, Neycer vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm x 440mm (five hundred eighty millimeter into four hundred forty millimeter) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Ordinary closet size of 570 x 460mm (five hundred seventy into four hundred sixty millimeter) Cera, Parryware, Hindwaree, Sanitaryware, Neycer or equivalent vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the rap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Anglo Indian Universal closet Cera, Parryware, Hindwaree, Sanitaryware, Neycer or equivalent vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the rap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and over to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing PTMT Coloured / white high density polyethylenepoly propylene 10 (ten) litres capacity (full flush) European standard central low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphen, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, with flush button, coupling for connections with inlet, outlet and overflow pipe, 40mm (forty millimeter) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet) overflow pipe to be measured and paid for separately) in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 800 mm x 450 mm (eight hundred millimeter into four hundred fifty millimeter) with bowl depth 200 mm (two hundred millimeter) stainless steel kitchen sink of AMC, UNIK, DIAMOND, Neelkanth make board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Hindware, Parrywise, Sanitaryware, Neycer, Cera ,mark vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Flat back 550mm x 400mm (five hundred fifty millimeter into four hundred millimeter) vitreous China wash basin of Cera, Parryware, Hindware, Sanitaryware, Neycer make or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Supplying in cast iron cover without frame for man holes for frame of internal dimension 455x610mm (four hundred fifty five into six hundred ten millimeter) rectangular CI cover (light duty single seat pattern-I) the weight of cover to be not less than 23kg (twenty three kilogram) as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass angle valve (heavy duty make of Kingston, Gem, Parko, Techno JAL,, ESS ESS JAQUAR, Sceko) of Jaqar without nuts and pipe in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 450mm (tFour hundted fifty millimeter) length 15mm (fifteen millimeter) nominal bore P.V.C connection withbrass unions in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve make of Zoloto Sant, L&K, Leader with wheel in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass Pillar tap (heavy duty make of Kingston, Gem, Parko, Techno JAL,, ESS ESS JAQUAR, Seiko) with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P. brass bid tap (heavy duty make of Kingston, Gem, Parko, Techno JAL,, ESS ESS JAQUAR, Seiko) of Jaqar with capstan head in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish make of Kingston, Gem, Parko, Techno JAL,, ESS ESS JAQUAR, Seiko with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 20mm (six hundred millimeter into twenty millimeter) C.P. Brass Towel rail (heavy duty make of Kingston, Gem, Parko, Techno LAL,, ESS ESS Jaquor, Sceiko) complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia C.P. Brass waste (heavy duty make of Kingston, Gem, Parko, Techno JAL,, ESS ESS JAQUAR, Seiko) for wash basin or sink in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450mm ( Six hundred into Four hundred fifty millimeter) bevelled edges mirror of superior glass mounted on 6(Six) milimetre thick A.C. Sheet or ply wood Sheet and fixed to wooden plugs C.P. brass screws and washers complete as per direction of as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin make of Commander, Coral, Hindware(Slimline), Hindustan, Cera 420 x 390 x 630mm (four hundred twenty into three hundred ninety into six hundred thirty millimeter)size, respectively with automatic flushing cistern with fittings R.S or C.I. Brackets standard size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I. clamps complete, including painting of cistern and fittings, cutting and making good the walls, floors where required one urinal basin with 5 litres automatic flushing cistern as per direction of as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing Exhaust Fan make of Usha, Havells, Orient, Cromption in Toilets, WC and Pantry with automatic shutter air zoom in sweep size 300mm (three hundred millimeter) duct sizeincluding fixing with approved adhesive etcetera complete in all respect as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) dia M.I. Union for wash basin or sink as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia Brass stop cocks as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeter) nominal size foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size inside plaster 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing plastic seat ( Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers Black or white plastic seat and cover as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing 200 mm (two hundred millimeter) wide cast iron Rungs withchequered or ribbed non slip surface including fixing in manholes with 200mm x200mm x100mm (two hundred millimeter into (two hundred millimeter into one hundred millimeter) cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeter nominal size as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size dia cast iron cowl as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) nominal size dia S.C.I/C.I. spun fittings and accessories single equal branch of required degree plain as directed by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Sushil Kumar Govt Contractor