Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹41.1 Laccepted-finance | ₹41.1 L | accepted-finance |
Tender Value
₹39.6 L
EMD Value
₹39,600
Closing Date
2 Dec 2025, 11:00 pmClosed
Minor Irrigation Department
EXECUTIVE ENGINEER
REPAIRS TO BILIKERE AND MARADURU LIFT IRRIGATION SCHEME IN HUNSURU TALUK MYSURU DISTRICT(RESERVED FOR ST)
MI/2025-26/LI/WORK_INDENT8802
MI/2025-26/LI/WORK_INDENT8802
Reserved
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Mysore
9 documents required · 9 mandatory
Satisfactorily completed(at least 90 percent of the contract value) as a prime contractor for at least ANY CONSTRUCTION WORK to an extent of 25 percent of the work for all works costing upto and Rs 50 lakhs Rs 9.90 Lakhs
Executed in any one year the following minimum quantities of work Earth Work Excavation 293.00 Cum - Cement Concrete both PCC and RCC 103.00 Cum - Reinforcement of Steel 3.154 Tonne - Indoor/Out Door Electrification-1 Job
3.2To qualify for award of this contract, each tenderer in his name should have in the last five years period ie(2020-21 to 2024-25)a)achieved in at least ONE financial years a minimum financial turnover(usually not less than the estimated cost under this contract for works costing upto 100 lakhs)Rs 39.59 Lakhs
₹990
₹39,600
2 Dec 2025
24 Nov 2025
4 Dec 2025
1 Dec 2025
REPAIRS TO BILIKERE AND MARADURU LIFT IRRIGATION SCHEME IN HUNSURU TALUK MYSURU DISTRICT
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supply and fixing of 11 kV, 11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018) complete with all lead and lift, loading and un loading and as per the directions of enginee...
Repairs and Reconditioning of 500 Kva 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and Conversion of CSP...
Transformer Oil as per IS-335:1993 EHV Grade Transformer Oil - New complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg complete with all lead and lift, loading and un loadi...
Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each complete with all lead and lift, loading and un loading and as per the directions of engineer i...
Good Quality Salt for grounding purposes packed in 50 Kg gunny bag complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Supplying of Switch disconnector fuse unit(TPN)HRC type(butwithout HRC fuses). With AC-23A duty and as per IS- 13947 complete with all lead and lift, loading and un loading and as per the directions o...
Fire Fighting Equipments with necessary mounting Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Fire Fighting Equipments with necessary mounting Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Fire Fighting Equipments with necessary mounting Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Fire Fighting Equipments with necessary mounting Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Fire Fighting Equipments with necessary mounting Stands complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Supplying and installation of RUBBER MAT 1mtrx1mtr-10mm thick. Complete including cost of materials, labour,usage charges of machinery complete as per specifications complete with all lead and lift, l...
Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS2509 with suitable size bends, junction boxes adhesive paste etc,and fixing using inverted wood plugs in case of RCC ceili...
Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make of 75x75x65mmcomplete with all lead...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junctionbox, elbows, screws at an interval of 300 mm as required. For 20mm complete with all...
Supplying and wiring adopting loop system in existing PVC Conduit/ casing capping using 2x1.5Sqmm (Phase&Neutral) &1x1.0sqmm (Earthwire)FRLS multistrand PVC insulated copper wire(confirming to IS-694:...
Supplying and wiring adopting loop system in existing PVC Conduit/ casing capping using 2x1.5Sqmm (Phase&Neutral) &1x1.0sqmm (Earthwire)FRLS multistrand PVC insulated copper wire(confirming to IS-694:...
Supplying 6 to 10 Way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws complete with all lead and lift, loading and un loading and as per the directions of engineer in c...
Supplying of 4 feet-PVC Batten with integrated LED light fitting 1 x 4' - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70percentagelumen maintenance with CRIgreater than80. Po...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 complete with all lead and lift, loading and un loading and as per the direct...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 complete with all lead and lift, loading and un loading and as per the direct...
Supply of LED Street light luminaire with pressure die casta luminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
Supplying and fixing telescopic M.S.bracket fabricated by using 0.5m length4" diatelescopic M.S.pipe, with 2"dia 1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M.S.sheet, gr...
Supply and fixing of 4 pole power contactor of 500Amps with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Supplying and fixing Micro process or based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting complete with all lead and lift, loading a...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers complete with all lead and lift, loading and un loading and as per the directions of en...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Labour Charges only for fixing of 100mm dia double / isolated AIR VALVES (CI tamper proof of PN 16.0)conforming to ISS 14845 - 2000 and as detailed below with required stub and flange, conveying to wo...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and delivery at site brand new best make pressure guage of 100mm suitable for centrifugal pump confirming to latest IS standards complete with all lead and lift, loading and un loading and as p...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Providing Ball bearing as per ISI specifiction with guarantee period of not less than 12 months for 200 HP complete with all lead and lift, loading and un loading and as per the directions of engineer...
Providing thrust bearing as per ISI specifiction with guarantee period of not less than 12 months for 200 HP complete with all lead and lift, loading and un loading and as per the directions of engine...
Ring spanners : 12 nos. per set complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Pipe wrench : 24 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Pipe wrench : 18 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Double end spanner : 12 nos. per set complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Hack saw frames plus B185 complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Rubber hand gloves : 15 kV tested complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Insulated cutting pliers : 12 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Line live tester complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Screw driver : 18 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Screw driver : 12 inches size complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Hammer 8 Lbs complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
AC Leakage Clamp meter (mA) (DCM 10 A) complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Multimeter electronic type complete with all lead and lift, loading and un loading and as per the directions of engineer in charge of the work
Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less than 12 m...
Providing thrust bearing as per ISI specifiction with guarantee periodof not less than 12 months. Bearing cost for 80 HP complete with all lead and lift, loading and un loading and as per the directio...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BILIKERE AND MARADURU LIS ST 50 LKS.doc
Tender Document • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .