GE 874/EWS-41/2019-20

Amount

Taking down chowkhats of frame with shutter exc 1.5 sqm but not exc 4 sqm each (without taking off shutters of the frame) complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone/ concrete, glazed with putty or fixed with beads, complete, all as specified and directed.

Dismantaling of structural steel work including doors, gates but excluding framed truss etc.

Demolition of cement concrete of any description and any position not otherwise specifically provided for, complete all as specified

Dismantling of timber scantling in unframed work under 40sqcm in section as in fillets, rails, posts, rafters, purlins etc , complete all as specified.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets all as specified & directed

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber, anodised aluminum snap beading screws anodised aluminium fittings such as peg stays 150mm long (1 no). hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified

Sheet glass ordinary quality, 5.5 mm thick, glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane, complete all as specified.

Door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed (Aluminium (die cast) body) complete all as specified

Mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified.

S & F solar control flim 50 micron thick reflective type sticked to glass panes as per instructions of manufactures. complete all as specified.

M&L 2nd class soft wood as in scantling, clean sawn fixed in position with nails in unframed work, complete all as specified.

Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06 Sqm but n exc. 0.11Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6), over and including 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) complete all as specified and directed

Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 3 Sqcm & nexc 6 Sqcm, second class soft wood, complete all as specified .

Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 13 Sqcm & nexc 25 Sqcm, second class soft wood, complete all as specified .

Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mmmm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

05 mm thick cement plaster in CM 1:3 on fair faces of brick work or concrete surfaces & finishing the surface as in ceiling even and smooth without using extra cement, complete all as specified.

4mm thick (Nos of ply 3) plywood, grade CWR type BB fixed to ceiling with nails to timber frame work, complete all as specified and directed

Vitreous china water closet pan semi pedestal pattern white, (Anglo Indian type) excluding flushing cistern and flushing pipe and including PVC seat cover & fixing bolts, fixed in repair, complete all as specified and directed

Vitreous china water closet pan (Pedestal pattern) white, excluding flushing cistern and flushing pipe and including PVC seat cover & fixing bolts, fixed in repair, complete all as specified and directed

PVC valve less syphonic action type flushing cistern 10ltr capacity, low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repair, complete all as specified.

Vitreous china Urinal, Half stall type white, (excluding flushing cistern, flush pipe ) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement etc and 32mm dia PVC waste pipe (Exclusive of fixing supply pipe to flushing cistern, trap ), fixed in repair, complete all as specified.

Vitreous china Wash hand basin, white, flat back of size 600x480mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and including waste pipe 32 mm dia, fixed in repair, complete all as specified.

Vitreous china white soap dish size 160x160x90mm fixed in repair, complete all as specified

Two coat of synthetic enamel paint including cleaning dusting of new or previously untreated wood or wood based surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth, complete, all as specified and directed.

Preparation of new surfaces and applying two coat of oil bound distemper oil emulsion in walls complete alll as specified and directed.

15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe fixed in repair complete, all as specified & directed

Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed in repair, complete all as specified and directed.

15mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches, fixed to wall, ceiling, laid in floors with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete brick masonary any section, including taking out embedded portion and making good disturbed ground Concrete, brick work masonry etc complete all as specified

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified

Taking down cement plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

Excavation in post holes each not exceeding 0.5 cum getting out, returning, filling in, including spreading, leveling, watering and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, in any type of soil, complete all as specified.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe-410-W (Gde E-250) Quality-A complete all as specified

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

0.63mm thick galvanised corrugated steel sheeting with Zinc coating of 120 gms/Sqm with two corrugation side lap and at least 150 mm end lap , fixed with coach screw and washers in roof/walls etc, complete, all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Description all as per item No 48 above, but except brick, complete all as specified.

Walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and directed.

Description all as per item No. 50 above, but except stone complete all as specified and directed.

PCC 1:3:6 type C-2(40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified directed.

Supply and fixing TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

All as specified in item No 53 herein before but 5 mm dia over upto and incl 10mm dia bars deformed as in stirrups/spacers/bindres.

Form work to sides of pillars, posts, struts piers, columns and stanchions and similar works for rough finished surface of concrete complete all as specified & directed by Engineer-in- charge.

S & FHand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

RCC M25 design mix (20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.

RCC M25 design mix (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed

Mild steel screw bolts exceeding 10mm but not exceeding 15mm dia at neck, machine made, with hexagonal or square heads at one end and screwed the other, or screwed both ends; each screwed and to be fitted with washers and one hexagonal or square nut exceeding 10cm and not exceeding 15cm long complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified.

Supply only chain link fencing any size for standards, rails, straining bolts, etc. including provision of binding wire complete as specified and directed.

M&L 15mm thick rendering in CM 1:4 on using water proofing compund at the rate 3% by weight of cement on fair faces of brick or concrete surfaces & finishing the surface in cement even and smooth without using extra cement, complete all as specified. (Note WPC will be measured and paid separately)

M&L 15mm thick rendering in CM 1:6 on using water proofing compund at the rate 3% by weight of cement on other than fair faces of brick or stone masonry surfaces & finishing the surface in cement even and smooth without using extra cement, complete all as specified. (Note WPC will be measured and paid separately)

Supply only Integral water proofing compound complete as specified and directed.

Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10m openable length (total length 90m) having 50 Nos rounds per 6m length upto 3.0m height fo wall with existing angle iron Y shaped placed 2.4m or 3.0 m apart and with 9 horizontal RBT reinforced barbed wire, stud tired with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of Engineer in charge, with reinforced barbed wire tape (RBT)/spring core (2.5mm thick) wire of high tensile strength of 165 Kg/sqmm with tape (0.52mm thick and weight 43.478 gm/m (cost fo MS angle, CC blocks shall be paid separately), complete all as specified.

Galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc complete all as specified and directed.

Joist,channel angle or tee sections fixed independently without connecting plates etc (cut to ordinary lengths i.e with in 20mm of the length indicated) confirming FE 410 W Gde E 250 quality 'A' complete all as specified.

Restraining resecuring and fixing to any type of standard rail including making good staples of old loose running barbed wire etc complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

One coat of synthetic enamel paint on old treated steel surfaces including preparation of old painted surface not otherwise described over 10 cm width or girth, complete, all as specified and directed.

Two coats of cement based paint over a coat of approved primer on newly plastered surfaces of wall including preparation of surfaces complete, all as specified and directed

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint laid in trenches/floor/walls as soil pipe(vent pipe), fixed, complete all as specified and directed.

Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed.

M&L Pre cast cement concrerte 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in bond stone and set in CM (1:4) complete all as specified.

100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in path, road, hardstanding etc, finished the surface even & fair without using extra cement complete all as specified

M/S SAJAA CONSTRUCTION COMAPNY

M/S ABDUL AHAD SHAH