PROVISION OF STATION STORE ALONGWITH ALLIED SERVICES ATTACHED WASHROOM FOR OFFRS AND FAMILIES AND SPL REPAIR TO BLDG NO P 5 OBLIQUE 3 AND P 5 OBLIQUE 4 AT JALIPA MIL STATION UNDER GE ARMY BARMER

Amount

M&L for taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed.

M&L for 2.0mm thick wall care putty on wall complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newplastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) with using WPC on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separatley.

M&L for preparing old/newplastered or unplastered surfaces of walls, removing unnecessary nails including filling of cracks/holes by crack filler and applying two coat of acrylic exterior paint over a coat of primer of required shade Asian ACE or equivalent at the rate 1.65 Litre/ 10 Sqm by application of roller brush complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof, kerbs not provided for in SSR Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed.

M&L for applying neat cement slurry with 3 kg of cement per sqm with mixing of liquid water proofing compound as per manufacturer instructions over surfaces roof, terrace, projection, chajjas, walls after prepration and cleaning of surfaces complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM (1:3) on concrete surfaces of roof, terrace, projection, chajjas, walls (old or new), finished even and smooth (without using extra lime or cement) with mixing of WPC as per manufacturer instructions complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for applying evenly a priming coat with bituminous primer at 4 Kg per 10 sqmetre over plastered/concrete surfaces including prepration complete all as specified and directed.

M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) by torched application method laid over and including applying evenly a tack coat of industrial bitumen S-35 grade (30/40) at the rate of 1.2 kg per Sq.m including cleaning surfaces by on and as per manufacturer instructions complete and all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 350x250x7mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) in walls and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36sq.m, in floors etc., set and jointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 4.0 mm thk sheet glass ordinary quality and glazing with beads fixed with metal panel pins n.exc 0.5 sq. m. in each pane complete all as specified and directed.

M&L for dismantling of water tanks of capacity exc 500 and n exc 1000 ltrs (RCC hume Pipe/PVC) including disconnecting all connections etc complete all as specified and directed.

S&F for 500 ltrs newrotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

M&L for taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

M&L for taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for 15mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repairs 15mm bore stop valves, angle cock, cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and directed.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed.

S&F in repairs wash hand basins, vitreous china, of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and 32mm PVC waste pipe etc complete all as specified and directed.

S&F in repair of PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair of PVC (SWR) 110 mm bore bends complete all as specified and directed.

S&F in repair of PVC (SWR) 110 mm bore branch piece (single Y) equal or unequal complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 2.5mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M&L for dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

S&F for 18mm thick MDF prelaminated board, prelaminated one side with decorative choice lamination matt finish & other side balancing white lamination fixed with screws as in cupboard shutters with self closing hinges 02 Nos in each shutter and fancy SS handles 01 No 100mm size in each shutter and drawer of bed room, kitchen and internal shelves, kitchen cabinets, partitions and drawers of any size complete all as specified and directed.

S&F for kitchen baskets 100 % stainless steel, non - magnetic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 470x485x200 mm of carcass including moving drawer channels complete all as specified and directed. & directed. Make : Prod code No. 5904 of Godrej or techno commercially equivalent make in Hettich/Lifetime ISI marked

S&F for kitchen baskets 100 % stainless steel, non - magnetic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 470x485x150 mm of carcass including moving drawer channels complete all as specified and directed. & directed. Make : Prod code No. 5903 of Godrej or techno commercially equivalent make in Hettich/Lifetime

S&F for Cup and Saucer Basket 100 % stainless stee, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 420x485x100 mm of carcass including moving drawer channels complete all as specified and directed. & directed. Make : Prod code No. 6130 of Godrej or techno commercially equivalent make in Hettich/Lifetime

S&F for Perforated Cutlery Basket 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 420x485x100 mm of carcass including moving drawer channels complete all as specified and directed. & directed. Make : Prod code No. 6133 of Godrej or techno commercially equivalent make in Hettich/Lifetime

S&F for Thali-Plate Basket 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism capable of holding plates, cup, saucers, bowls and dongas with 420x485x200 mm of carcass including moving drawer channels complete all as specified and directed. & directed. Make : Prod code No. 6138 of Godrej or techno commercially equivalent make in Hettich/Lifetime

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed.

S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, gauge etc size of members of shutter as specified in SSR part-I, section 8, clause 8.24 (a) complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples, wooden doors, steel windows, aluminium windows including removing of wooden beading, flat iron, alm cleats etc and refixing of the same, if beading, iron flat or alm cleat if found broken during replacement of wire mesh the same will be replaced with new, complete all as specified and directed.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed. The door frame shall be tied to the wall using 75/100mm long MS screw.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

S&F for 150mm long aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium anodized handle complete all as specified and directed.

M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 25mm dia fancy stainless steel curtain rod with fancy fixing brackets, fancy stops/supports, rollers etc. complete all as specified and directed.

M&L for surface derssing n exc. 15cm deep in hard/dense soil complete all as specified and directed.

M&L for excavation in trenches not exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundation etc. for shafts, wells, manholes etc. n.exc 10 Sqm on plan and n.exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 40 mm graded aggregate in foundations, filling, below plinth beam and mass concrete complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork for flat finished surfaces to chullah hoods, chajjas, band, troughs and similar items including edges complete all as specified and directed.

M&L for reinforced cement concrete (design mix ) nominal mix M- 20 1:1.:3 in chajjas complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, for masonry straight or curved on plan, built in and setting in mortar 1:4 complete all as specified and directed.

S&F pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws complete all as specified and directed.

S&F for steel work in tubular trusses, post, purlin, rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves andscrews at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on concrete masonary or external surfaces other than fair face of brick work with water proofing compound finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on ceiling surfaces over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coat of cement based paint on walls over a coat of primer with alkali resistant priming paint cement complete all as specified and directed.

M&L for sand filling under floors or in foundations, in pinth height including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type D2 using 40mm graded aggregate as in subbase complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7mm thick of size 300mX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:4 complete all as specified and directed.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

S&F powder coated aluminium section for door frame , windows, ventilators, with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified and directed.

S&F 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed.

S&F 3mm thick figured glass, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each panel complete all as specified and directed.

M&L for 38mm wide glass dividing strips, 3 mm thick in plinth protection every 600 mm distance complete all as specified and directed.

S&F vitreous China wash down water closet (European type) (floor hung (pedestal pattern) white complete excluding flushing cistern and flush pipe and trap white including fixing bolts, WC seat cover of fixed with aluminium or ms chromium plated complete all as specified and directed.

Supply only PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F health faucet (ABS Body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

Supply only stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob fency type chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed.

S&F vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket complete all as specified and directed.

S&F 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F grating square150mmx150mm made out of stainless steel complete all as specified and directed.

S&F grating round 150 mm with waste hole made out of stainless steel complete all as specified and directed.

S&F vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), withgrating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 20mm (OD) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed complete all as specified and directed.

S&F 25mm (OD) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed all as specified and directed.

S&F 25 mm outer dia gate valve/ ball valve for, screewd both ends for CPVC pipes and fixed complete all as specified and directed.

S&F 32 mm dia waste coupling of PTMT (half or full threaded) complete all as specified and directed. (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F 32mm low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors as in waste pipe for WHB, urinal etc complete all as specified and directed.

S&F chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed.

S&F PVC bends of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap, plain including jointing with solvent cement bends of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to 150 mm bore drain pipes including packing under, haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type C–2 complete all as specified and directed.

M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC (1:2:4), type B1 (using 20 mm graded stone aggregate) precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and directed

S&F PVC (SWR) vent cowl fixed to 110mm bore of pipes all as specified and directed.

M&L for returning, filling in, including spreading, leveling, watering & well ramming in layers not exc 25 cm in hard /dense soil complete all as specified and directed.

M&L for removing excavation material n. exe. 50m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for reinforced cement concrete nominal mix M-25 ( 20mm aggregate) in plinth beam, column, slab, footings, RCC pillar, chajjas complete all as specified and directed.

M&L for excavating in post holes (or similar holes) in hard /dense soil, each not exceeding 0.5 cum, in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil, complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundation filling in post holes complete all as specified and directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L 100mm thick cement concrete type B-2 1:2:4, (40mm graded aggregate finished even and smooth without using extra cement as in flooring complete all as specified and directed.

S&F powder coated aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etc complete all as specified and directed.

S&F powder coated aluminium section for window and ventilator sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150 mm long (1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle 1 Nos complete all as specified and directed.

S&F powder coated aluminium grill for window/ventilators of mesh size 50 x 50 mm and made out of 4 mm thick aluminium podwer coated sections including necessary fitting arrangements of approved design/pattern complete all as specified and directed.

S&F 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A, complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering in any curvature complete all as specified and directed.

S&F of 60 mm machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade comple including sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in flooring, steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.

M&L for taking down unserviceable main switch/DB, Teak wood boards etc etc complete all as specified and directed.

M&L for taking down fan, ceiling/exhaust cable end, dismantling blades and removing fan and blades to store etc complete all as specified and directed.

M&L for taking down submain wiring of any size etc complete all as specified and directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch complete all as specified and directed.

All as per srl item No 142 above but for one ceiling fan point controlled by one switch.

All as per srl item No 142 above but for one exhaust fan/wall mounting fan point controlled by one switch.

All as per srl item No 142 above but for one light point controlled by two 2-way switches.

All as per srl item No 142 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.

All as per srl item No 142 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per srl item No 142 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.

All as per srl item No 142 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 32 A, 240 V complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix switch piano flush type single pole two way 5 Amps complete all as specified and directed.

Supply and fix socket outlet 2in1, 3pin, 5A complete all as specified and directed.

Supply and fix socket outlet 2in1, 3pin, 6/16 A complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

Supply and fix bell push, flush type, 5 Amps complete all as specified and directed.

Supply and fix call bell AC, 230 volts single pole complete all as specified and directed.

Supply and fix step type electronic fan regulator flush type, 230 volt, AC complete all as specified and directed.

S&F MCB single pole, 240 volts 6 to 32 Amps, 'C' curve complete all as specified and directed.

S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, 'C' curve complete all as specified and directed.

S&F MCB TPN 40 to 63 Amps, 415 Volts 'C' curve complete all as specified and directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 10 KA, busbars, neutral link, blanking plates complete with all accessories all as specified and directed. by Engineer-in-Charge. Note: Outgoing MCBs shall be measured and paid separately. Note: Outgoing MCBs shall be measured and paid separately

Supplying and fixing of ceiling fan, five star rating, (BLDC) white/ivory 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50hz supply with down road complete, including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector etc complete all as specified and directed.

Supply and fix exhaust fan 300 mm sweep with louvre complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm, metal exhaust fan complete all as specified and directed.

Supply and fix exhaust fan 150 mm sweep with louvre plastic body complete fixed to window/wall with suitable fastening and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm complete all as specified and directed.

M&L for cutting of brick/stone masonary for fixing of exhaust fan and making good to the disturbed surface including painting/colour wash complete all as specified and directed.

M&L for sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run o f 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L for sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run o f 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S&F in repair LED batten suitble for indoor application 20 W, 4' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

LED light fitting 1X9 W bulkhead luminaires with lamp holders etc complete with all aceessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. by Engr-in Charge.

S& F in repair lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix in repair decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed.

Supply & fix in repair LED lamp 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and directed.

S&F in repair LED batten suitble for indoor application 10 W, 2' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for inverter point wiring for light, ceiling fan and 5 Amp socket with 2.5 sqmm, PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS), 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories upto the main DB and 15 A switch socket combination with gang box flushed in wall for inverter power supply complete all as specified and directed.

M&L for earthing in repair with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & directed.

S&F LED batten suitble for indoor application 20 W, 4' length , wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply & fix LED lamp 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and directed.

S&F LED 2" X 2" Panel suitable for indoor application 24 W, ominal Wattage 20W Lumens 2600, LED Lifetime 100000 Hours, Color Temperature 4000K, Power Factor >0.90, Temperature Range -40ºC to +40ºC Certifications ETL, DLC Listed Yes, Premium, Efficacy 130 Lm/W, Finish White, Operating Voltage AC 100-277V CRI 80+Dimmable 1-10V, Lens Type Frosted ceiling mounted and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

m/s sai construction company,bijarar (BID ID -3146585)

S.K. INFRASTRUCTURE (BID ID -3146750)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3145294)

M/s Malinath Electricals (BID ID -3147253)

M/s Sati Jasnath Enterprises (BID ID -3145926)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3143356)