Construction of New Ration shop building work Ayyanar kovil 2nd street Extension in ward no .23

Earth work excavation in all kinds of soil except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layer of 15 mm thick well rammed and consolidated depositing the surplus earth within compound, clearing and leveling the site with initial lead of 10m etc., and lift of 2m etc., complete.

Supplying and filing in foundation and basement with Qurry dust in layers of 15 cm thick well rammed and consolidation including watering complying with Std specification etc.

Plain Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40 mm gauge hard broken granite jelly for foundation wherever necessary etc. complete 1 cum based on SI.No.127

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 (Rectangular or Square Column)

Supplying and erecting shuttering with Necessary supports for plinth beam with all cross bracings etc. complete (RCC column footing plinth beam and lintel sider) Using steelplater and angles S.I.No.155 -10m2

Reinforced cement concrete 1:1 1/2:3 (One cement One and Half Sand and Three aggregate) using 20mm machine broken gauge bard granite jelly for RCC works the rate excluding the cost of reinforcement grills,centering and shuttering etc., complete

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also)

Supplying and erecting shuttering for size soffits supports for plain surface such as reinforced cement slap rectangular beams tee or L beams lintela bed blocks stair and landing beams beams etc cop in all any height (the retrived materials should be taken back by the contractor) the payment for centering shall be given after the concrete is las aid (bottom only) portion using steel plates -10m2

Brick work in CM 1:5 (one cement five sand) using 2nd class bricks in foundation basement

Brick work in CM 1:5 (one cement five sand) using 2nd class bricks in Super Structure in Ground Floor.

Fabrication and Supply and fixing of steel door shutter made out of 40 x 40 x 6 mm MS angle section with necessary stiffeners 32 x 6 mm and flats at 30 cm intervals and necessary cross diagonals MS flats. The shutter frame shall be fully covered by 18G CC sheet and provided with required locking facilities and hinges including cost of red oxide primers.

Supply and fixing of steel windows using F 7 D2 section for outer frame with mullion of F4B section the shutter shall be provided with roller of 6mm dia including safety bar or 12mm sq. rod at equal interval of 10cm center to center the shutter shall be fitted with 18 G or sheet one handle batch and adjustable winds lay made cut of 20 x 10 mm m.s channel with fixing bracket pegs .Necesasary 4mm hold cyast of 10cm long etc. comp. the window will be finished with one coat of red oxide primer

Plastering with CM1:3(one cement and three sand) 10mm thick10m2.

Plastering with Cement 1:5 (one cement and five sand) 12mm thick etc complete

Weathering course with concrete Broken brick (s.i no 278) &P.D data 54 jelly 20mm gauge in pure slaked lime (no sand to be added ) over roof slab the proportion of brick jelly to lime being 32 to12.5 well beated for giving required slope and thickness as directed by the departmental officers etc complete -

Finishing the top with one course of machine pressed tiles of size 200mm x200mmx20mm of approved quality in c.m 1.3 (one cement add three sand) 12mm tk mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed to full depth of tiles with the same c.m with red oxide and water proffing including curing etc complete

Wiring with 2 x 1.50 sqm PVC unheated SC. Copper cable of 1100V grade in suitable PVC regid pipe in wall on celling with PVC accessories with 150mm x 100mm x 113mm T.W. switch box in flush with all covered with 3mm thick hylurn sheet fro 5 Amp 3 pin non interlocking or plug including pintop with painting of suitable colour with cost of continuous earth wire connection of SWG TC wire for plug point. Electrical 22-23 SD-18

Supply and fixing of 40w Tube light box type with ballast set ext,comp(higher end Philips /crompton /Equivalent )

Supplying and Fixing of 1200mm sweep A.C Celling fan complete with regulaor with 300mm down rod of the existing clamp

White washing two coats using freshly burnt shell lime, in all floors, including cost of lime and other materials such as brushes, kanjee, scaffolding charges etc., complete

Painting Two Coats on New Iron Work with best synthetic enamal paint of approved colour and quality etc., 10M2.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

ADD GST18%

Please Enable Macros to View BoQ information