SPECIAL REPAIRS TO BLDG No XXXVII OF 68 I SUP PI ASC AND PROVISION OF ADDN ALTERATION OF TOILET OF STN HQ WELLINGTON UNDER GE WELLINGTON

Amount

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas fixed with self tapping screws all as specified and directed.

Dismantling of structural steel works including doors, gates but excluding framed truss etc all as specified and directed.

Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins when connected to common rafters and running rails and guides for sliding doors, fixed with angles, cleats or other connecting plates conforming to Fe-290 (Gde-E-165) all as specified and directed.

Taking down the complete existing water proofing treatment of any description over roof slabs etc all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 as in padding using 20mm graded stone aggregate all as specified and directed.

Roughening surface of roof slab, providing 20 mm thick plaster in cement mortar 1:3 mixed with water proofing compound (@ 3% weight of cement) over PCC, PCC will be measured and paid separately all as specified and directed. NOTE:1 The unit rate shall be deemed to include the cost of removing the vegetation on roof slab and removing plants, grass, etc. if any, preparation of roof surfaces by roughening to receive water proofing treatment and also cleaning the blockages in rain water pipes if any as required at site all as directed. NOTE :2 Supply only water proofing compound shall be measured and paid separately. NOTE :3 The unit rate shall be deemed to including the cost of removing the demolished material to a distance exceeding 50m but not exceeding 250m all as specified and directed.

APP modified prefabricated polymeric membrane 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non-woven polyster matt black finished weighing not less than 100 gm/sqm having softning not less than 140 degree celsius longitudinal tensil strength not less than 300N/sqcm, side lap and end lap 10cm with torch application of membrane over compatible primer @ 0.40 Ltr/sqm and finished with aluminium paint @ 0.10 kg/sqm on top complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Dismantling of wall ceiling boards of any fixed in any position in nails or any description all as specified and directed.

False Ceiling grid of aluminium anodised section to form a grid of 65cm x 65cm including providing and fixing gypsum 12mm thick in ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding walls using nylon sleeveless and screeves at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 450mm suspended from soft at approx 900mm c/c with GI cleat and section (not exceeding 1.2mtr length) of 0.55mm thickness having kurb web of 50mm of and flanged of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion of hold fastners 12.5mm dia 40mm long complete all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick / concrete / RR masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces mixed with liquid water proofing compound as per manufacturer's instructions, (first coat 10mm thick in cement mortar 1:6 and secound coat 5mm thick in cement mortar 1:4 on external surface) finished even and smooth without using extra cement all as specified and directed. Note: Water proofing compound will be measured and paid separately.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads. (Exc 1.5 Sqm) all as specified and directed.

3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sq m in each pane all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm as in repairs all as specified and directed.

Applying two coats of synthetic enamel paint over new or untreated wooden surfaces of any description not otherwise described over 10cm in width or girth over a coat of pink primer including preparation of surface complete all as specified and as directed.

Preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Coloured Non skid ceramic tiles matt finish 7mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 complete all as specified and directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors and including skirtings and dados and set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface and including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 complete all as specified and directed.

Glazed ceramic coloured dark shade tiles in vertical surfaces 450 x 350 x 7mm thick, as in vertical surfaces jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface on including 10mm thick setting coat in CM 1:4 complete all as specified and directed. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms etc including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

Vitreous china wash basin oval shape counter type white, size 560x410x80mm excluding taps, but including brackets, cutting for and pinning in ends of brackets or erecting stand and waste pipe etc, complete all as specified and directed. Make: Prayag Coy Cat No 4790

Vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including seat cover for pedestal pan complete all as specified and directed. Make: Cat No: CNS-WHT-55355)

PVC low level flushing cistern 10 lts capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32mm dia, complete all as specified and directed.

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Central hole basin mixer for mixing hot and cold water without popup waste system with 450mm long braided hoses screwed down for iron pipe 15mm dia bore complete all as specified and directed. Make: Jaquar, Continental Cat No CQT-23167B or equivalent

Brass CP wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe 15mm dia bore and fixed in repairs complete all as specified and directed. Make: Jaquar, Clarion (Cat No CQT-23273UPR) or equivalent.

Angular Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore all as specified and directed. Make: Jaquar, Clarion (Cat No CQT-23053) or equivalent.

PVC connections 15mm size with PTMT nuts of length 450mm and repairs complete all as specified and directed. Make: Jaquar, Cat No ALD-803B or equivalent.

Over head shower rose 150x150mm square shape single flow (body and face chrome finish) with rubit cleaning system complete all as specified and directed. Make: Jaquar, Cat No OHS-1805 or equivalent.

Shower arm 20mm dia and 300mm long round shape with 90 degree bend for wall mounted showers with flanges, complete all as specified and directed. Make: Jaquar, Cat No SHA-479L300 or equivalent.

15mm bore bib tap cast copper alloy with chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed.

Health Faucet including all fittings, complete all as specified and directed. Make: Jaquar allied (Cat No ALD CHR 593) or equivalent.

Soap dish holder complete all as specified and directed. Make: Cat No AKP 35731P P No.99 of JAQUAR or equivalent.

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. Make: Jaquar, continental (Cat No CAN 1111NM) or equivalent.

20mm dia aluminium anodised fancy type drapery rods including brackets, stop, rollers etc, complete all as specified and as directed

Toilet paper holder, Stainless Steel, complete including fixed in repairs all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed

Concealed steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete all as specified of size 15 mm bore.

Concealed steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc complete all as specified of size 20 mm bore.

20mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

15mm bore steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed.

Dismantling of PVC water tanks exceeding 500 Ltr capacity and not exceeding 1000 Ltr capacity from existing position all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 1000 Ltr hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

Ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule of 15mm dia all as specified and directed.

Preparation of old decorated plastered or unplastered surface of wall by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, efflorescent salts, trading oil and greasy spots, moss etc., and applying one coat of white wash all as specified and as directed.

Preparation of old plastered surface of wall after removal of existing treatment and applying two coats of exterior weather proof paint over a coat of primer on external wall all as specified and as directed.

Complete removal of existing surface of old distempered surface of walls and applying two coats of oil bound distember over a coat of wall care putty average of 3mm thick including preparation of surface all specified and directed. Note: Putty shall be measured and paid separately.

Wall care putty of any discription complete all specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

20mm thick Boarding of 2nd class soft wood, planed one side with butt joint, fixed with nails in any situation, complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutter from frames) area exceeding 1.50 Sqm and not exceeding 4 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jamb, walls for taking out hold fast shall be finished identical to existing finish woithout any extra cost to Govt) all as specified and directed.

2nd class hard wood (sal / Hollock) wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint complete all as specified and as directed.

35mm thick factory made second class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of timber flat on sides (feather edged), or veneered particle board medium density, wood particle board with commercial face venners; supplied and fitted to chowkats, complete all as specified and as directed.

35mm thick factory made 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.23 of SSR Part-I, fitted to chowkat, complete all as specified and as directed.

Mild steel works for bands, straps,support or stays, holdfast for doors, wall ties; hooks for hanging fans,etc. Conforming to Fe-290 Gde E - 165 all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site all as specified and as directed.

Aluminium handles, cast type, anodised of size 150mm complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified and as directed.

Butt hinges 100mm size medium weight cold rolled Mild steel all as specified and as directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor and including fixed in repairs all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and paving not exceeding 15cm thick (below or above GL) all as specified and as directed.

75mm thick PCC (1:4:8) type D2 1:4:8 using 40mm graded aggregate as in sub base course all as specified and as directed.

Rubberised Chequered cement concrete tiles 30cm x 30 cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over and including 20mm thick screed bed in cement mortar 1:6 complete, all as specified and directed.

Hardcore of broken stone gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

75mm thick and 750mm wide PCC 1:3:6 type C-1 using 20mm graded stone aggregate laid to a slope 1:20 as in plinth protecton/ path way finished even and smooth with out using extra cement including necessary formwork all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft/ loose soil all as specified and directed.

Returning filling in soft/ loose soil including spreading levelling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point all as specified and directed.

Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for Drain covers and manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement for drain all as specified and directed

PCC 1:3:6 type C1 using 20 mm graded aggregate as in surfaces channel / drain including necessary formwork all as specified and as directed

Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 using 20mm graded stone aggregate exceeding 10cm in width and setting in cement motor 1:4 complete all as specified and directed.

Rendering 10mm thick cement mortar 1:4 on fair faces of brick work/block or concrete surfaces all as specified and directed

Vitrified stone / matt coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 20mm thick screed in cement mortar 1:3 complete all as specified and directed.

Coloured Glazed ceramic tiles in vertical surfaces 450mm x 350 x 7mm to 8mm / 600mm x 300mm x 7mm to 8mm thick as in dados, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match the surface, on including 10mm thick renderig in cement mortar 1:4 completeall as specified and directed.

Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding edges of stone slabs one edge such as steps, cooking platforms and other similar situation, complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work / concrete surfaces / RR Masonry, finished even and smooth without using extra cement compete all as specified and directed

RCC in type A-1 (1:1,½:3) in slabs supported on walls beams and columns floors, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint (Anti Fungal) white or tinted over a coat of primer over two coats of external wall care putty 2-3mm thick in two layer as approved by GE complete all as specified and directed.

Preparation of old wall surfaces and applying two coats of ACE Apex ultima Paint (Anti Fungal) or equivalent in Shalimar paints/ Berger Paints as approved by GE complete all as specified and as directed.

GI frame work for frame size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flages of 20mm and 30mm and web of 27mm fixed surrounding walls using Nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flages of 15mm each and web of 45mm suspended from soft at approx 900mm c/c with GI cleat and section not exceeding 1.2mtr length of 0.55mm thickness having kurb web of 50mm of and flanges of 26mm each with lips of 10.5mm fixed to intermediate channel with connection clips across the intermediate channel at 457mm c/c complete all as specified and directed.

1PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of aluminium / G.I / M/S as per specification and drawing all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Roof trusses (framed) Fe-410 (Gde-E-250) quality A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with M.S square tube supply and fixing in opening as per specification and drawing.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing.

Stainless steel dustbin basket frame round in shape of size not less than 30cm in length and 15 to 30cm in dia fixed with shutter complete all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed all as specified and directed.

Shutter in Required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Demolition of PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

Disconnecting existing tanks, setting a side complete all as specified and as directed

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs of the size 20mm (Minimum weight 210 gms) dia all as specified and directed.

Supply and fix in repairs table top basin of size 485x395x150mm including waste coupling and waste pipe complete all as specified and directed. Make: Cat No JDS-WHT-25909 of JAQUAR

Supply and fix in repairs water closet rimless wall hung with UF soft close seat cover, hinges, fixing accessories set complete all as specified and directed. Make: Cat No. ACS-WHT-87951 of Jaguar or equivalent.

Supply and fix in repairs single piece slim concealed cistern with floor mounting frame, installation Kit and S type Drain Pipe connection set for wall Hung WC (without Flush Control Plate) including fixing accessories set complete all as specified and directed. Make: Cat No. JCS-WHT-2400FS of Jaguar or equivalent.

Flush Control Plate for concealed Cistern including fixing accessories set complete all as specified and directed. Make: Cat No. JCP-CHR-372415 of Jaguar or equivalent.

Sensotronic Sensor fauset for wash hand basin with 175mm extension Body with 600mm long brided hoses pipes complete all as specified and directed. Make: Cat No SNR-CHR-51021A of Jaguar or equivalent.

Angular stop cock with wall flange for 15mm dia of chromium plated fancy type in repairs complete all as specified and directed. Make: Cat No KUP-35053PM of Jaguar

Chroumium plated fancy type long body 2 in 1 bib tap fixed with existing pipe and fixed in repairs all as specified and as directed. Make: KUP-35041 PM of JAQUAR or Equivalent

Supply and fix in repairs hand shower (health faucet) with 8mm dia, 1.2m long flexible tube and wall hook with back flow preventer complete all as specified and directed. Make: Cat No ALD-577 of JAQUAR or equivalent.

Soap dispencer automatic aluminium / abs capacity 0.8 Ltr finish chrome / blcak including fixing accessories complete all as specified and directed. Make: Cat No SDR-BLC-DJ0160AS of JAQUAR or equivalent.

Paper Towel dispence, Towels with C/Z folds wall mounted of capacity 400-600 C/Z towels of AISI 304 stainless steel finish stain including fixing accessories complete all as specified and directed. Make: Cat No PTD-SAP-DT0106CS of JAQUAR or equivalent.

Automatic hand dryer (smart flow) of ABS material, finish white including fixing accessories complete all as specified and directed. Make: Cat No HDR-WHT-M04A of JAQUAR or techno commercially equivalent.

Supply and fix in repairs single towel rail 600mm long complete all as specified and directed. Make: Cat No AKP-35711P of JAQUAR or equivalent.

Supply and fix in repairs CP toilet paper roll holder complete all as specified and directed. Make: Cat No CAN AKP-3575-1553 of JAQUAR or equivalent.

Supply and fix in repairs Robe Hook complete all as specified and directed. Make: Cat No CAN AKP-35791P of JAQUAR or equivalent.

Grating Square in shape 100 x 100mm /150 x 150mm including grating frame fixed all as specified and directed.

Urinal of size 375 x 315 x 620mm with all accessories and waste pipe as required complete all as specified and directed. Make: Cat No URS-WHT-132530 of JAQUAR or techno commercially equivalent.

Automatic sensotronic mini concealed type flushing valve (sensor unit with wall sensor kit) for urinal complete set (with installiasation box and battery) including connecttion to urinal etc complete all as specified and directed. Make: Cat No SNR-STL-51083 of JAQUAR or techno commercially equivalent.

Curved shape urinal partition with frosted glass 8mm thick, fitting finish chrome of height 900mm and width 450mm including all fixing accessories complete all as specified and directed. Make: Cat No JSE-CHR-810UC450X of JAQUAR or techno commercially equivalent.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish to match with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multistranded copper conductor single core cable 1100 volts grade in and including PVC surface conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed multistranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No 139 hereinbefore but One 5A 2pin/3pin switch socket outlet multipurpose on independent Board all as specified and directed.

All as per Item No 139 hereinbefore but One bell point controlled by one bell push all as specified and directed.

All as per Item No 139 hereinbefore but One light point controlled by 02 two way switches all as specified and directed.

All as per Item No 139 hereinbefore but wiring complete with 2.5 Sqmm for 3 pin 5/15A socket multipurpose on independent board all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch two way 6A one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket outlet 2/3 pin combined 6/16A 230V AC 50 HZ SP two module all as specified and directed.

Modular bell push switch 6A 230V AC 50 HZ SP one module all as specified and directed.

Buzzer, ding dong AC 230 volts, single pole all as specified and directed.

Frame plate with matching cover, one module plate all as specified and directed.

Frame plate with matching cover, two module plate all as specified and directed.

Frame plate with matching cover, three module plate all as specified and directed.

Frame plate with matching cover, four module plate all as specified and directed.

Frame plate with matching cover, six module plate all as specified and directed.

Ceiling rose 3 terminals PVC/ Poly carbonate isolated body including base block complete all as specified and directed.

Wall mounted 20W LED 6000K (4 ft.) batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver, including replacemen all as specified and directed. Make: CG Cat No: LDL-20-CDL or equivalent in Philips/ Bajaj/ Havells

Wall mounted 10W LED 6000K (2 ft.) batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver, including replacemen all as specified and directed. Make: CG Cat No: LDL-10-CDL or equivalent in Philips/ Bajaj/ Havells

Decorative wall mounted type SS finish fixture with textured glass diffuser suitable for LED lamp with B22 base with all accessories including replacement all as specified and directed. Make; Havells Cat No. LHDL06160099 or equivalent of Philips / Bajaj / CG

10W LED lamp with base B22 all as specified and directed. Make; Havells Cat No. LHLDEUEEML8R010 or equivalent of Philips / Bajaj / CG

Energy saving 13.5W LED bulkhead luminaire with opal diffuser all as specified and directed. Make: Havells Cat No. LHEXCGP7PN5N5W013 or equivalent of Philips / Bajaj / CG

Surface mounted LED flat panel 18W 6000K luminaire PDC aluminium housing and PMMA diffuser with all accessories including replacemen complete all as specified and directed. Make : CG Cat No: LHEAAWP7ILW018 or equivalent in Philips / CG

LED Security Light fitting of 25 watts comprising of epoxy powder coated housing, enclosed with glass cover in frame, with protection IP65 complete with all accessories and lamp colour white and fixing in and including GI bracket of suitable size/ dia all as specified and directed. Make: CG Cat No: LSTS-25-CDL-M or equivalent in Philips/ Bajaj/ Havells

Taking down copper / Aluminium sub main wiring of any size and runs complete and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as specified and directed.

Taking down Submain wiring 2 x 2.5 Sqmm PVC insulated aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 2.5 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 2.5 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Taking down Submain wiring 2 x 4 Sqmm PVC insulated aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. (From Indl DB to Geyser Point)

Taking down Submain wiring 2 x 6 Sqmm PVC insulated aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. (From Main DB to Indl DB)

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB 240V all as specified and directed

Taking down old unserviceable DB of any size/ type/ ways complete and removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as specified and directed.

MCB DB TPN 12 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

MCB DB TPN 8 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

MCB SP 230V 6-32 Amps capacity all as specified and directed. Make: L&T Cat No BB10320C or equivalent in Philips /ABB.

MCB SPN 230V 6-32 Amps capacity all as specified and directed. Make: L&T Cat No BB20320C or equivalent in Philips /ABB.

Cutting chases in stone masonry wall / concrete floor /roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good cutting not exceeding 10cm girth all as specifed and directed.

Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (Junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, clamps etc all as specified and directed.

Taking down old unserviceable exhaust fan and supply and fix exhaust fan with PVC body 250mm sweep including removing the existing old one and depositing to MES store yard for the safe custody of the item all as specified and directed. Make: Havells Model No Ventil Air DX WHT/BLK or equivalent in Crompton / Bajaj.

Stationary storage type (vertical type) energy efficient electric water heater capacity 25 liters complete with 04 Nos grouting bolts, nuts and washers grouted on wall and making good disturbed grouted surface, thermoplastic body, neon indicators, safety valve including removing old unserviceable geyser to store all as specified and directed. Make: Havells Cat No GHWAMGTWH025 or equivalent in Crompton / Bajaj.

GI Tube medium grade fixed complete to wall and ceiling or laid in floor of size 15mm with all fittings and fixing complete including necessary cutting chases in walls, floors etc and their making good in the case of concealed pipe work, clips, wall hooks, wooden plugs etc and fitting with existing pipe of any size complete all as specified and directed.

15mm dia bore stop valves, cast copper alloy screwed down high pressure fancy type, chromium plated screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

15mm bore bib tap cast copper alloy with chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed.

LED batten in extruded Aluminium housing with diffuser complete all as specified and directed. Make Crompton bright line Cat No CLS-100-20-65-HL2-DP-NWH or equivalent of Philips / Bajaj / Havells

Wall mounted 10W LED 2 feet long with integrated electronic driver, lamp color white all as specified and directed. Make: Crompton Ct No LCTLN-10-CDL or equivalent in Philips / Bajaj/ Havells

240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and make good with existing surface, and including necessary civil works complete all as specified and directed.

Electrical water heater steel body with copper inner tank and heating element upto 3KW capacity 3 litre complete with all accessories all as specified and directed. Make: Havells Cat No GHWAIAPWH003

GMS Builders