Supply, Installation,Testing and Commisisioning of an efficient Exhaust Syatem and RO Plant for New Autoclave Room in Animal House

Amount

Design, Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications and as per SMACNA standard of following sheet thickness complete as required. Hot dipped Galvanised with 120GSM Zinc coatingThe price shall include necessary scaffolding required for working at required height.

Thickness: 0.63 mm Sheet

SITC of Extruded aluminium powder coated diffuser/ Grill with volume control damper with all necessary supports as per directed and as instructed by OIC-ES

Supply, installation, testing and commissioning of GI volume control duct damper/Non Return damper 18 guage GI. frame & 20 guage GI blades complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supply & fixing of Fire retardant synthetic canvass connection with a provision to measure the canvass temperature at the mouth of package units & plenum with all fixing arrangement, nut bolts, hardware’s etc. as instructed and as directed by EIC for above package units.

supply & Installation testing commissioning of 3phase,1.0 hp tube axial Direct driven fan shall be suitable for ESP 5 mm WG. The fan motor shall be suitable of 400V ± 10% Volts, 50 Hz, 3phase AC power supply The system shall have suitable capacity of starter panel with weather proof enclosure. ,1.0 hp tube axial fan having 4000 CFM with all necessary hardware, M.s. stand & support electrical cable from tube axial fan to starter panel etc as per instruction of OIC-ES with all necessary hardware, M.s. stand & support etc. as per instruction of engineering in charge.

Removable type Birds screen/wire mesh made out of 10 SWG MS wires at every 1” distance duly painted with red oxide and synthetic enamel as per the duct size.

Dismantling of existing Duct, diffuzer, tube axial fan, starter panel etc as per instructed and as directed by OIC-ES in Autoclave Room

Supply Installation, Testing and commissioning of Reverse Osmosis System to produced 100 LPH should be suitable for 230V ± 10% Volts, 50 Hz, single phase AC power supply with min 300GPD booster pump and auto cutoff system. Internal wiring , piping, sensor etc if require is in the scope of the contractor. The system installtion is on the terrace of the building as per instructed and as directed by OIC-ES. Note:- foundation requie for the plant as recommanded by manufacturer in the scope of contractor. No additional cost to be given for the same.

Supply Installation, Testing and commissioning of overhead Triple Layered plastic storage Tank with ISI certified and capacity of minium 1000 ltrs of water with concrete foundation as recommanded by manufacturer, piping, fittings and all other necessary hardware required to connect to the Reverse Osmosis System as per instructed and as directed by OIC-ES. Note:- No additional cost to be given for the piping.