Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹21.2 LAccepted-AOC | L-1 | Accepted-AOC Evaluated as L-1 | |
| 2 | Rejected-Technical KATHARA DIST BOKARO 829116 | KATHARA | BOKARO | JHARKHAND | 829116 | - | Rejected-Technical Not evaluated as L-1 | |
| 3 | Rejected-Technical AT PO JARANGDIH BOKARO | JARANGDIH | BOKARO | JHARKHAND | - | Rejected-Technical Not evaluated as L-1 |
Tender Value
₹19.4 L
EMD Value
₹24,300
Closing Date
14 Oct 2024, 6:00 pmClosed
P.E.(E and M), GVP Ph-II, PO Sawang
Office of the P.E.(E and M), GVP Ph-II, PO Sawang Colliery, Dist Bokaro 829128
Day to day extension, shifting, diversion of 3.3KV overhead line of departmental feeder and pump feeder for one years of Govindpur Phase-II OCP
2024_CCL_318460_1
PE(EandM)/GVP Ph-II/E-Tender/2024-25/22, Dt-01.10.2024
Open Tender
Electrical and Maintenance Works
Item Rate
365 days
Office of the P.E.(E and M), GVP Ph-II, PO Sawang
Please refer Tender documents.
5 documents required · 5 mandatory
₹24,300
22 Oct 2024
1 Oct 2024
16 Oct 2024
2 Oct 2024
14 Oct 2024
2 Oct 2024
2 Oct 2024 - 11 Oct 2024
Amount
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required.11.3.3 above 08 mtr up to 11 mtr
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required.11.3.4 above 11 mtr up to 13 mtr
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required.11.3.4 above 13 mtr up to 15 mtr
Supplying and erection of 11 KV Composite polymer pin insulator complete with large steel head G.I. pin, nuts washers etc. as required
Supplying and erection of 11KV composite polymer disc insulator for 11KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required
Erection of Disc /Pin Insulator for 11KV overhead line as required
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required (20 spanX 3 wireX 50Mtr.X 0.394 Kg/mtr.)=1182 kg
Erection of all aluminium conductor of of 7/1.96 mm to 7/3.10 mm diameter including binding etc as required. (20 span x 3 wire x 50 mtrs. x 0.342 kg/ mtrs. = 1026.00 kg
Erection of pole top/ staight two wire/ V shape two wire, angle iron/ channel iron, cross arm on tubular/ rail/ PCC pole for 11/22/33KV as required.
Erection of double pole 3 wire cross arm for 11KV / 22KV / 33KV over head line as required.
M.S Nut & Bolt
Supplying and erection of G.I Wire No. 8SWG including binding etc. as required=24Kg/set of cradling (A) Supply of GI wire - 25KgX120.00=Rs. 3000.00 (B) Erection of G.I wire=Rs. 25 X28=Rs.700 (C) One no. of crsdle guard = 1 no. x 102.00= Rs. 120.00 (Total= Rs.3802.00/set)
Supplying and erection of G.I Wire No. 8SWG including for earthing Rs. 120 Erection = RS. 28, 120.00+28.00 = 200 Kg
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11KV overhead lines with rated valtage 9KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
Supplying and erection of galvanised stay set for 11 KV overhead lines complete with 19/ 20 mm dia X 1.8 metres long stayrod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble,stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm diaG.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) foundation including excavation and refillingetc. as required.
Dismantaling of pole/street light standered/strut embeded in cement concrete foundation etc as required
Dismatling of over head lines comprising of copper/ aluminium over head conductor, G.I wire, cross arms, insulators etc, as required. (01).Conductor = 20 span x 3 wire x 50 mtrs. =3000 mtrs. x 0.342 kg/m = 1026 kg (42. Disc Insulator = 42 nos. X 2 kg/set = 84 kg (30)pin insulator = 28 nos. X 1 kg/set = 28 kg (04). M.S Material = 400 kg Total : 1538.00 Kg
Safe earthing electrode having two custom made G.I. tubes (Galvanized 80 micros, minimum one inside the other of length 2 mtr ( outer dia 80mm) filled with conductor rich crystalline mixture (CCM)
Back fill compound (bag of 18 kg each)
Installation Charge of item no 1.18 and 1.19
Providing brick work (in width 225 mm or more) with F.P.S ( Non Modules) bricks of class designation 7.5 in cement mortar (1:4) 1 cement : 4 coarse sand at all levels.(0.08 cum/each X 0.4nos.= 0.0.32
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.2.7.3 Hard rock (blasting prohibited) 906.50 x0.650x3.5x5)=7.40
Providing of HT 11KV Separator 04 wire
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .
Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre)double pole cross arm for three wire 11KV over head line conductors complete withthrough bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats weldedon one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts,nuts and washers etc (as per drawing) and painting with primer and finish paint as required
Total impact of GST for the purpose of CTC
M/S TIGER ENTERPRISES
M/S JAY GURU CONSTRUCTION
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_330093.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .